Three point bending tests of single edge notched beam (SENB) specimens were carried out to evaluate the fracture behavior of the fine-grain isotropic nuclear grade graphite, IG-11. To measure the crack initiation point and the subsequent crack growth, the direct current potential drop (DCPD) method and a traveling microscope were used. The effects of test variables like initial crack length, specimen thickness, notch type and loading rate on the measured fracture toughness, KQ, were investigated. Based on the test results, the ranges of the test variables to measure the reliable fracture toughness value were proposed. During the crack growth, the rising R-curve behavior was observed in IG-11 graphite when the superficial crack length measured on the specimen surface was used. The increase of crack growth resistance was discussed in terms of crack bridging, crack meandering, crack branching, microcracking and crack deflection, which increase the surface energy and friction force.

• Dae-Jong Kim(Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology)
• Seung-Jin Oh(Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology)
• Chang-Heui Jang(Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology)
• In-Sup Kim(Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology)
• Se-Hwan Chi(Korea Atomic Energy Research Institute)