논문 상세보기
pp.45-52
The reinforced concrete wall type apartments built before 1988 in Korea, which are rarely seen in other countries, were constructed using tunnel form method for convenience of construction. Tunnel form method, however, do not arrange bearing walls in the direction of long side of the apartment, and this results in little resistance capability against lateral loads in that direction. Consequently, there exists significant collapse possibility due to the formation of plastic hinge at the joints of wall and slab during earthquake. This study experimentally investigates the reinforcement methods using carbon sheet and L-shaped steel which were not seismically designed. The reinforcement method using carbon sheet and L-shaped angle, has following advantages; construction workability, usage of light-weight material, and little requirement for the installation room. The specimen with steel bar fill up using modified epoxy mortar in the mid-span of the slab shows the same stiffness as the standard specimen without reinforcement and the stiffness of the specimen reinforced by carbon sheets without L-shaped steel was increased by only about 13%, implying that those existing methods cannot provide significant reinforcement effects. For the specimens of which wall-slab joints were reinforced using both carbon sheet and L-shaped steel, the increase of stiffness ranges from 43% to 496% and the increase of energy dissipation amount ranges from 120% to 233%. Also it was identified that the linkage method using penetration bolts was more efficient than the one using expansion anchors in increasing stiffness, strength and energy dissipation capacity.
