Performance based design(PBD) is the method to make a fire safety design against them after predicting the factors of fire risk in a building. Therefore, predicting fire risk in a building is very important process in PBD. For predicting fire risk of a building, an engineer of PBD must consider various factors such as ignition location, ignition point, ignition source, first ignited item, second ignited item, flash over, the state of door and fire suppression system. But, it is difficult to trust fire safety capacity of the design because the process in Korea' PBD is unprofessional and unreasonable. This paper had surveyed some cases of PBD that had been made in Korea to find the problems of the process to predict fire risk. And it have proposed the improvements of process to predict fire risk of a building.

Abstract
 1. 서 론
 2. 성능설계와 화재위험예측
  2.1 성능설계
  2.2 화재위험예측의 고려사항
 3. 조사대상 및 현황
  3.1 조사대상
  3.2 조사대상의 화재위험예측 현황
 4. 화재위험예측과정의 문제점과 개선방안
  4.1 용도별 발화 장소 및 발화지점 선정
  4.2 발화원의 선정
  4.3 첫 번째 및 두 번째 착화물품의 선정
  4.4 플래시 오버(Flash Over) 발생여부
  4.5 출입문 상태와 소화설비 작동여부
 5. 결 론
 6. References
 저 자 소 개

• 이세명(경일대학교 소방방재학과) | Se-Myeoung Lee Corresponding Author