논문 상세보기
pp.375-384
Kenaf (Hibiscus cannabinus L.) was recognized as a potential source of forage. But the domestic cultivation techniques are not set standards yet. So we tested the basic culture techniques during 2012~2013 for getting a high yield and good grade forage production system. The best seeding method for mechanized planting (corn planter used) was hill seeding with 20×20 cm seeding distance. When we treated hill seeding with 20×20 cm, the yield what we could get was 13,641 kg/10a and it was 32% more than that of conventional practice hill seeding with 20×30 cm seeding distance. The proper seeding date for getting high yield was May 1. In May 1, the yield per 10a was reached 13,423 kg, and it was 30% more than that of seeding at May 30. More over the crude protein content which was important factor for determinating forage nutritive value was 12.7% and it was higher 1.8% (relatively 16.5% high) than that of May 30 seeding. The most effective herbicide for kenaf was Fluazipof-p-butyl. It’s herbicidal rate was 97% and phyto-toxicity was less than 5%. Regional adaptability for Jeollabuk-Do including Imsil Gun, Kochang Gun and Sunchang Gun were identified that the stable cultivation were possible in these area with average yield 12,400 kg/10a and it was about 1.7 times as compared to corn harvest.
재료 및 방법
파종방법 설정
파종시기 설정
재식거리 및 파종량 설정
제초제 선발 및 지역정응성 검정
사료가치 분석
분석시기
조단백질 함량
세포벽 구성물질
결과 및 고찰
케나프 생장패턴 분석
파종방법 설정
적 요
사 사
인용문헌(REFERENCES)
