In this study, the specimen of tapered double cantilever beam(TDCB) with aluminum foam is designed and shearing fatigue strength is based on the investigation of static behaviour analysis under the condition of mode Ⅱ. These specimen models have length and width of 200 mm and 25 mm. The inclined angles of adhesive face at the specimens are 6°, 8 °and 10°. As the inclined angle becomes higher, the time for which the model can not be broken during fatigue load becomes longer. The shearing strength of TDCB bonded structure with aluminum foam applied by shearing fatigue load can be evaluated through finite element method.

Abstract
 1. 서론
 2. 연구모델 및 경계조건
  2.1 연구모델
  2.2 경계설정
 3. 해석결과
  3.1 θ=6°인 모델에 대한 해석 결과
  3. 2 θ=8°인 모델에 대한 해석 결과
  3.3 θ=10°인 모델에 대한 해석 결과
  3.4 피로 사이클에 따른 변위 그래프의 비교
 4. 결론
 후기
 References

• 손홍붕(공주대학교 대학원 기계공학과) | H. P. Sun
• 조재웅(공주대학교 기계자동차공학부) | J. U. Cho Corresponding Author