This study aims at analyzing the property of the structural body bonded with alumimum foam by the utilization of the aluminum foam of closed type used generally with impact absorbent. The structural bodies bonded with the aluminum foam of DCB and TDCB are designed in this study, and then the fatigue analysis and experiment are carried out. At fatigue analysis, the maximum load happens at all of each specimen models when the fatigue life of 0 to 50 cycle is proceeded. And from the point of time that the maximum load happens, the load at the bonded surface is seen to be decreased in cases of analysis and experiment. As the specimen thickness is increased, the maximum load happened at specimen is increased. It is confirmed that the result of fatigue analysis becomes similar to that of fatigue experiment for verification. It is thought that the study data on various specimen thicknesses can be secured simply without the extra fatigue experimental procedure. By using this study result, the mechanical properties of the structural bodies bonded with the alumimum foams of DCB and TDCB with mode Ⅲ type can be thought to be analyzed effectively.

• 이정호(Mechanical Engineering Dept. Graduate School,Kongju National University) | Jung-Ho Lee,
• 조재웅(Professor, Division of Mechanical & Automotive Engineering, Kongju National University) | Jae-Ung Cho Corresponding Author