The purpose of this paper is to assess the effect of surface characteristic of GFRP rebar on concrete-reinforcement bond behavior. For sample preparation, 10 GFRP rebar with two types of surface conditions were used to fabricate 15×15×15cm sized GFRP reinforced concrete. Then, pull-out test was carried out on each concrete samples until the maximum bond strength was achieved. From the test result, it was found that the maximum bond strength at the lattice type is 1.38 times higher than that for unidirectional surface.

Abstract
 1. 서 론
 2. 실험방법
 3. 해석결과 및 고찰
 4. 결 론

• 김태진(한국건설생활환경시험연구원) | Kim, Tae-Jin
• 김영근(한국건설생활환경시험연구원) | Kim, Young-Geun
• 임남기(동명대학교 건축공학과) | Lim, Nam-Gi
• 김주현((주)선진진공재료기술) | Kim, Ju-Hyun
• 이현기((주)브리콘랩) | Lee, Hyeon-Gi