A Study on the Units of Measuring Scale in Hwangnyongsa Temple Planning
This paper aimed to identify the units of measuring scale in Hwangnyongsa temple planning with the published excavation survey reports. Hwangyongsa temple site was planned under Silla Capital’s urban planning in 6~7C, its full size was 800×800, and main temple was 400×515 of Goguryeo’s system of measurement. Main hall was located in the center of Hwangnyongsa temple site, and its location could be seen that there was the arrangement of main temple divided into 3 : 2. Building plan measuring units proved to be 351~356㎜ and 294~ 296㎜ by analyzing measured data of remains. Lecture hall and Wooden pagoda were rebuilt by using the ancestors’ units of measuring scale again and Bell hall was not planned by Tang’s system of measurement in middle of 8C. In this respect, it would be important to have a deliberate attitude and lay down stereotypes on research of the units of measuring scale in ancient architecture.