HANARO(High Flux Advanced Neutron Application Reactor) design was started from 1985 and was constructed in 1995 by KAERI(Korea Atomic Energy Research Institute). The document control book was written by hand and hard-copy was kept at that time. JRTR(Jordan Research and Training Reactor) was contracted for export to Jordan March 2010 by KAERI Consortium. This contract is a matter for congratulation of export of first made-in-Korea nuclear system. NRR(New Research Reactor) officially launched in April 2012. The document control system is controlled by PPM (Project Procedure Manual) and QAP(Quality Assurance Procedure) and ANSIM(KAERI Advanced Nuclear Safety Information Management) was built for JRTR. ANSIM system consists of the document management holder, document container holder and organization management holder. This system was registered about 2,000 design output like DDA(Document Distribution for Agreement), design documents, design drawings and project manger memorandum. The system design for JRTR was smoothly performed using ANSIM. NRR set to separated exclusive system that was based on JRTR ANSIM. Folder of nuclear laws, codes and standards was added to that system and those will be useful during designing. The project and quality assurance plans and procedures has been managed from design documents separately. Above all things, independent review and ALARA(As Low As Reasonably Achievable) review were operated for nuclear safety at ANSIM. And cover and body of design document were combined and backup system was established. After then, system upgrade and operation pursue the effect analysis by design change for accomplishment of the research reactor project.

1. 서 론
 2. 연구로 사업관리 체계
  2.1 요르단연구로 사업
  2.2 신형연구로 사업
 3. 문서관리 및 문서번호 분류
  3.1 기본 문서번호 체계(Basic Numbering Structure)
  3.2 서신문서 및 기술문서 번호
 4. ANSIM시스템 구성
  4.1 서류관리
  4.2 서류보관함
  4.3 사업 자료
  4.4 조직관리
 5. 시스템 구현 및 향상
  5.1 시스템 구현
  5.2 시스템 향상
 6. 결 론
 참고문헌

• 박국남(한국원자력연구원 신형원자로개발연구소)
• 우상익(한국원자력연구원 신형원자로개발연구소)