In this study the optimum conditions for recovery of valuable metal in Electric Arc Furnace Dusts were investigated. 2M of H2SO4, 1~5 of solid/liquid ratio, 0~180 min of leaching time has been established for leaching condition, and for electrowinning, each of Pt, C, Zn, Pb anode and Zn, Cu cathode was compared respectively at pH 2, 4 and 6. The result of elemental analysis of Zn crystal, a lagre quantity of Fe and H has been observed with Zn and other heavy metal, therefore, impurities removing process would be requir for enhancing purity of Zn. As the result, about 60% of Zn has been recovered under condition of 2 M of H2SO4, 1:2 of S/L ratio at 120 min, and Pt or Pb for anode, Zn for cathode has been shown the highest efficiency of electrowinning at pH 6.

1. 서론
 2. 재료 및 방법
 3. 결과 및 고찰
  3.1. 분진의 성상분석
  3.2. 침출율 최적화 실험
  3.3. 전해채취 최적화 실험
 4. 결론
 REFERENCES

• 문대헌(경기대학교 환경에너지공학과, Department of Environmental Energy Engneering, Kyonggi University) | Dea-Hyun Moon
• 정재훈(경기대학교 환경에너지공학과, Department of Environmental Energy Engneering, Kyonggi University) | Jae-Hoon Jeung
• 장순웅(경기대학교 환경에너지공학과, Department of Environmental Energy Engneering, Kyonggi University) | Soon-Woong Chang Corresponding author