The purpose of this study is to enhance heat insulation effect and to decrease fire hazard by attaching aluminum foil to expanded polystyrene, which is mainly used for insulating materials, to have fire retardant. The result of the test confirmed that the insulating materials, expanded polystyrene of 10 kg/m3 and 14 kg/m3 of density attached aluminum foil on both sides, showed 12%, 14% of improved heat transfer coefficient respectively compared to existing expanded polystyrene of the same density. Besides, they met all the standards for the testing of heat release and gas hazard. On the other hand, the one made of general expanded polystyrene could not meet the standards of the heat release test and the gas hazard test.

Abstract
 1. Introduction
 2. Structure of Expanded PolystyreneHeat Insulating Materials withAluminum Foil
 3. Test for Measurement of HeatTransfer Coefficient and Testingof Gas Hazard
  3.1 Test for Measurement of HeatTransfer Coefficient
  3.2 Heat Release Test and Gas HazardTest
 4. Conclusion
 5. Conflict of Interest
 6. References

• Ha-Sung Kong(Department of Fire and Disaster Prevention, Woosuk University) | 공하성 Corresponding Author