Carbon fiber reinforced plastics are typical examples of carbon fiber, which retain high strength and high strength at high temperatures. Also, it is applied to various fields, such as the structure of the aircraft, automobile, and the core industries. CFRP machining methods include machining tools such as cutting machining and laser machining. In this thesis, a tool dynamometer and tool microscope were used to measure the cutting characteristics of various cutting conditions and tool wear and tool wear. As a result, the cutting force of the new shape drill (lower shape drill) was measured higher than other tools, the amount of tool wear was the lowest, and it was found that a good machined surface was obtained.

Abstract
 1. 서론
 2. 연구 방법
 3. 연구 결과
 4. 결론
 References

• 노양호(Chonbuk National University) | Yang-Ho Noh Corresponding Author
• 오성훈(Chonbuk National University) | Sung-Hoon Oh