논문 상세보기

DLP방식의 3D프린팅의 내마모성 평가 관한 연구

A Study on the Evaluation of Wear-Resistance with 3D Printing of Digital Light Processing

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/371614
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
한국기계기술학회 학술대회논문집 (Proceedings of KSMT Annual Meeting)
한국기계기술학회 (Korean Society of Mechanical Technology)
초록

The aim of this study is to investigate the effect of wear resistance with 3D printing of DLP(Digital Light Processing). For this purpose, three wear factor which are wear loss, coefficient of friction and friction force applied to test wear-resistance. Wear test of ball-on-disk has been performed using steel balls to determine the variation of wear characteristics. Finally, the coefficient of wear was calculated by the Archard wear equation with 3D printing of DLP.

목차
Abstract
 기호설명
 1. 서론
 2. 본론
  2.1절 재료 및 시험 조건
 3. 실험 결과
  3.1절 표면분석
  3.2절 경도테스트
  3.3절 내마모 분석
 4. 결론
 References
저자
  • 김은성(Dept. of Automation Mechanical Engineering, VISION University, college of Jeonju) | Eun-Sung Kim Corresponding Author
  • 박현웅(Dept. of Automation Mechanical Engineering, VISION University, college of Jeonju) | Hyeon-Ung Park