Recently, the demand of wire quality improvement has been increasing due to the development of the textile market, and the demand for round type flat wire having superior performance compared to the existing reed wire is also increasing greatly. The round wire requires equal spacing and precise alignment of the wire at reed knitting. So, there is a need for a method for measuring the flatness of Reed in real time. In this paper, it is shown how the contact and non - contact methods for the flatness of Reed used in a power loom are easy to measure in real - time process. The contact-type method provides excellent measurement accuracy and precision because it directly touches the object. The non-contact type does not touch the object, so it does not scratch the surface, and the result can be obtained faster than the contact type. Contact type measuring device was used as contact type and laser displacement sensor was used as non - contact type. It was confirmed that the measurement method using the laser displacement sensor (non-contact type) is suitable for the real time process.

ABSTRACT
1. 서 론
2. 평탄도 측정 방법론
    2.1 평탄도 측정 방법론
3. 평탄도 측정 결과 및 고찰
    3.1 평탄도 측정결과
    3.2 고찰
References

• 김태동(Yeungnam University College) | Taedong Kim
• 김진호(Department of Mechanical Engineering, Yeungnam University) | Jinho Kim Corresponding Author