Heat transfer and pressure drop of horizontal heat exchangers with different configurations and installations numerically characterized. Three different heat exchangers were used and shaped as linear, wavy, and horizontal slinky, respectively. Installation depth was set from 0.5m to 3.0m and pipe spacing was ranged from 0.3m to 2.1m. The results showed that heat transfer rate and pressure drop were increased with the increase in the installation depth and the pipe spacing. The horizontal slinky heat exchanger carried more heat compared to others due to the greater effective heat transfer surface area per installation area. In terms of a ratio of heat transfer rate to pressure drop indicating the system efficiency, the linear heat exchanger performed better than others. On the other hand, the horizontal slinky heat exchanger was the most effective with respect to a ratio of heat transfer rate to installation cost.

ABSTRACT
1. 서 론
2. 연구방법
    2.1 수치해석 대상
    2.2 수치해석 방법
3. 결과 및 고찰
4. 결 론
References

• 공민석(Korea Institute of Energy Research Solar Thermal Convergence Laboratory) | Min-Suk Kong
• 이경호(KIER) | Kyoung-Ho Lee Corresponding Author