Since electric energy is used in industry, mass production and various conveniences are provided. To provide convenience for the construction and operation of such electric energy transmission and distribution facilities, it is increasing that the demand for special purpose vehicles, that is, telescopic aerial work platform vehicles. When working active electric work using the telescopic aerial work platform vehicles, due to active electric work is inevitable, it is essential to ensure insulation performance for the safety of the operator. In this paper, we study the design and development of mechanical properties for filament winding process of glassfiber/epoxy composite, it is required to boom of telescopic aerial work platform vehicles. The glass fiber/epoxy composite filament winding process and its mechanical properties were evaluated to replace the existing ATOS80 boom. By filament winding process it was obtained the mechanical properties required for the design analysis of the glass fiber/epoxy composite boom. Using this, the insulated boom for the 30m class aerial work vehicle was designed and was manufactured by applying the filament winding process. The fabricated composite boom was evaluated by the static strength test to meet the required strength. The maximum displacement was 84mm and the crack occurred at the maximum load of 8981N. It satisfied the maximum lifting load of 4900N and 210mm the maximum displacement required for the boom.

ABSTRACT
1. 서 론
2. 필라멘트 와인딩에 의한 유리섬유/에폭시 복합재시편 제작 및 기계적 물성 평가
3. 복합재 붐 해석/제작 및 구조 안전성 평가
    3.1 복합재 붐 해석 및 제작
    3.2 복합재 붐의 구조 안전성 평가
4. 결 론
References

• 송준혁(Chief researcher of the Korea Institute of Carbon Convergence Technology) | Joon-Hyuk Song Corresponding Author