논문 상세보기

Cu2ZnSn(S,Se)4 (CZTSSe) 박막 태양전지 적용을 위한 마그네트론 스퍼터링으로 증착된 AZO/Ag/AZO 투명전극의 특성 KCI 등재 SCOPUS

Characteristics of an AZO/Ag/AZO Transparent Conducting Electrode Fabricated by Magnetron Sputtering for Application in Cu2ZnSn(S,Se)4 (CZTSSe) Solar Cells

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/394811
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
한국재료학회지 (Korean Journal of Materials Research)
한국재료학회 (Materials Research Society Of Korea)
초록

Recent advances in technology using ultra-thin noble metal film in oxide/metal/oxide structures have attracted attention because this material is a promising alternative to meet the needs of transparent conduction electrodes (TCE). AZO/ Ag/AZO multilayer films are prepared by magnetron sputtering for Cu2ZnSn(S,Se)4 (CZTSSe) of kesterite solar cells. It is shown that the electrical and optical properties of the AZO/Ag/AZO multilayer films can be improved by the very low resistivity and surface plasmon effects due to the deposition of different thicknesses of Ag layer between oxide layers fixed at AZO 30 nm. The AZO/Ag/AZO multilayer films of Ag 15 nm show high mobility of 26.4 cm2/Vs and low resistivity and sheet resistance of 3.58*10−5 Ωcm and 5.0 Ω/sq. Also, the AZO/Ag (15 nm)/AZO multilayer film shows relatively high transmittance of more than 65% in the visible region. Through this, we fabricated CZTSSe thin film solar cells with 7.51% efficiency by improving the short-circuit current density and fill factor to 27.7 mV/cm2 and 62 %, respectively.

목차
Abstract
1. 서 론
2. 실험방법
    2.1 O/M/O 제작
    2.2 CZTSSe 태양전지 제작
    2.3 특성 평가
3. 결과 및 고찰
4. 결 론
References
저자
  • 이동민(전남대학교 신소재공학과) | Dong Min Lee (Department of Materials Science and Engineering, Chonnam National University)
  • 장준성(전남대학교 신소재공학과) | Jun Sung Jang (Department of Materials Science and Engineering, Chonnam National University)
  • 김지훈(광주과학기술원 전기전자컴퓨터공학부) | Jihun Kim (School of Integrated Technology, Gwangju Institute of Science and Technology)
  • 이인재(전남대학교 신소재공학과) | InJae Lee (Department of Materials Science and Engineering, Chonnam National University)
  • 이병훈(전남대학교 신소재공학과) | Byeong Hoon Lee (Department of Materials Science and Engineering, Chonnam National University)
  • 조은애(전남대학교 신소재공학과) | Eunae Jo (Department of Materials Science and Engineering, Chonnam National University)
  • 김진혁(전남대학교 신소재공학과, 전남대학교 광전자융합기술연구소) | Jin Hyeok Kim (Department of Materials Science and Engineering, Chonnam National University/Optoelectronics Convergence Research Center, Chonnam National University) Corresponding author