Porous Cu-14 wt% Co with aligned pores is produced by a freeze drying and sintering process. Unidirectional freezing of camphene slurry with CuO-Co3O4 powders is conducted, and pores in the frozen specimens are generated by sublimation of the camphene crystals. The dried bodies are hydrogen-reduced at 500oC and sintered at 800oC for 1 h. The reduction behavior of the CuO-Co3O4 powder mixture is analyzed using a temperature-programmed reduction method in an Ar-10% H2 atmosphere. The sintered bodies show large and aligned parallel pores in the camphene growth direction. In addition, small pores are distributed around the internal walls of the large pores. The size and fraction of the pores decrease as the amount of solid powder added to the slurry increases. The change in pore characteristics according to the amount of the mixed powder is interpreted to be due to the rearrangement and accumulation behavior of the solid particles in the freezing process of the slurry.

Abstract
1. 서 론
2. 실험방법
3. 실험결과 및 고찰
4. 결 론
References

• 이규휘(서울과학기술대학교 신소재공학과) | Gyuhwi Lee (Department of Materials Science and Engineering, Seoul National University of Science and Technology)
• 한주연(서울과학기술대학교 신소재공학과) | Ju-Yeon Han (Department of Materials Science and Engineering, Seoul National University of Science and Technology)
• 오승탁(서울과학기술대학교 신소재공학과/서울과학기술대학교 분말기술연구소) | Sung-Tag Oh (Department of Materials Science and Engineering, Seoul National University of Science and Technology/The Institute of Powder Technology, Seoul National University of Science and Technology) Corresponding Author