Animal orthopedic implants are an area that has recently been come into the light due to growing number of single-person households and increasing of interest in pets. The purpose of this study was to investigate a method to design and manufacture a bushing in a desired direction and angle with the environment of use, while the bone joint plate could be stably deformed during animal fracture surgery. It was found that the bone joint plate was capable of deformation in all directions and was designed to be transformed to the desired angle without degrading the basic properties of bending strength. Also, it was found that the bushing-type bone joint plate could be controlled in multiple directions and angle at omni-directional movements(0°-360°) and 0°-10° moving forward, backward and side to side.

ABSTRACT
1. 서 론
2. 뼈접합판의 설계
    2.1 뼈접합판의 형상 선택을 위한 기초설계 및 유한요소 해석
    2.2 판상형 뼈접합판의 설계
    2.3 판상형 뼈접합판 제작
3. 부싱형 뼈접합판의 설계 및 제작
    3.1 부싱형 뼈접합판 설계
    3.2 부싱형 뼈접합판 제작
4. 기계적 평가
4. 결 론
References

• 권오성(ABLE Co., Ltd) | Oh-Seong Kwon
• 이삼철(Dept. of culture, Hanlyo University) | Sam-Cheol Lee