Fermentation Characteristics of Wine Yeast Strains for White Wine Making
샤르도네 품종을 이용한 포도주 양조용 효모의 발효 특성은 다음과 같다. S6U 균주는 다른 균주에 발효속도는 느렸지만 발효 종료시점에 완전히 발효되는 특징을 보였다. W-3 균주는 발효중 산 생성량이 적었으며 (0.75%), UCD530과 AC- 균주로 발효된 포도주에는 산류 extract 함량이 각각 3.26 mg/L 및 3.22 mg/L로써 다른 균주에 비해 많았다. CEG와 CS2 균주로 발효된 포도주는 특히 황색도 값이 높았으며, EC11
The characteristics of used wine yeast strains were as follows, S6U showed low fermentation speed than those of other yeast strains, but this strain fermented completely later. The wine fermented by W-3 was very low contents of total acid, 0.75% and the ones fermented by UCD530 and AC- contained much extract, 3.26 mg/L and 3.22 mg/L respectively. The wine fermented by CEG and CS2 were predominant in yellowness, and EC1118 produced large amount of acetaldehyde, 49.9 mg/L than those of other strains. EC1118 and CY3079 displayed low methylene blue dyeing ratio, below 15%, meaning high alcohol tolerance yeast. UCD530 produced extremely high contents of glycerol, succinate and lactate compared with other strains. These properties revealed that UCD530 was a typical Saccharomyces bayanus species. The main organic acids produced by wine yeasts were pyruvate, lactate, succinate and acetate. The concentration of acetate in experimental wine could be divided into two parts, one group had concentration below 170 mg/L (UCD530, EC1118, AC-, CY3079, W-3), and the other had concentration up to 350 mg/L (S6U, CEG, CS2).