This study was conducted for the purpose of suggesting a standard that can be used under ambient temperature by improving the low mechanical and thermal properties of ABS. PC was used as a filler, and post-curing conditions of the ABS/PC blend injection material were investigated. It was found that the ABS/PC blend injection material having a PC content of 20 wt.% or more showed little change in tensile properties at a temperature of 50°C, and a decrease in tensile properties of less than 10% at 80°C.

• 김남일(전북대학교 산업기술대학원 산업기술학과) | Namil Kim
• 김연직(전북대학교) | Kim Yonjig Corresponding Author