The purpose of this study is to improve the mechanical properties and develop manufacturing technology through self-soluble alloy powder flame spray coating on the surface of a run-out table roller for hot rolling. The roller surface of the run-out table should maintain high hardness at high temperatures and possess high wear, corrosion, and heat resistances. In addition, sufficient bonding strength between the thermal spray coating layer and base material, which would prevent the peel-off of the coating layer, is also an important factor. In this study, the most suitable powder and process for roll manufacturing technology are determined through the initial selection of commercial alloy powder for roll manufacturing, hardness, component analysis, and bond strength analysis of the powder and thermal spray coating layer according to the powder.

Abstract
1. 서 론
2. 실험방법
3. 실험결과
4. 결 론
References

• 박지웅(마그마엔지니어링코리아) | Ji Woong Park (MAGMA Engineering KOREA, Republic of Korea)
• 김순국((주)나우산업) | Soon Kook Kim (NOW Industries Co., Ltd., Republic of Korea)
• 반계범(새한용사엔지니어링) | Gye Bum Ban (SAE HAN METALLIZING, Republic of Korea) Corresponding author