Level 3 driving, which enters full-fledged autonomous driving, is becoming more common. And research on autonomous driving is growing rapidly. Therefore, there is a need for a hardware platform to implement autonomous driving, but the actual vehicle price is too high and the implementation conditions are very limited, so its usability is inevitably reduced. In this study, by providing an easy-to-access hardware platform for anyone to support autonomous driving research, compatibility with software platforms can be increased. As a result of this study, it is possible to conduct hardware platform and software platform education at the same time. Through this, trial and error due to errors in each of the two platforms can be reduced. In addition, various sensors, such as camera sensors and LiDAR sensors, were installed on the hardware platform, and a hardware platform capable of testing autonomous driving for education and R&D was conducted not only outdoors but also indoors with little external environmental impact.

• 윤재곤(서영대학교) | Yun jae gon Corresponding author