Construction industry is considered as one of the most high-risk industries for work-related injuries and fatalities, accounting for more than half of fatalities in Korea. Advanced countries have recognized the critical role of designers in preventing construction accidents and have established regulations on design for safety. In line with this, the Korean government have also implemented regulations that require owners and designers to review the safety of design outcomes. However, it has been observed that designers face challenges in identifying hazards and integrating design solutions at the design stage mainly due to their shortage of required knowledge and skills. This study aimed to examine design solutions that can be applied to prevent fall accidents in the construction industry, and to establish a relationship between these solutions and fatal fall accidents occurred over the past three years in Korea. This study also analyzed the relationships of four variables (construction type, cost, work type, and fall location) with design solutions. The results indicated that all four variables have significant relationships with design solutions, with fall location showing the strongest relationship. The design solutions and their relationships with fatal fall accidents identified in this study can be utilized in identifying hazard and integrating design solutions to ensure design for safety.

Abstract
1. 서 론
2. 국내외 DfS 제도 및 실태
    2.1 국내 제도
    2.2 국외 제도
    2.3 국내 DfS 적용실태
3. 연구 방법
    3.1 연구 대상 데이터
    3.2 추락재해와 설계안전기법의 연관성 분석방법
    3.3 통계분석 방법
4. 분석 결과
    4.1 추락재해와 설계안전기법의 연관성
    4.2 재해 발생 특성별 설계안전기법의 연관성
5. 토의 및 결론
6. References

• 김경환(울산대학교 산업경영공학과) | Kyunghwan Kim (Department of Industrial Engineering, University of Ulsan)
• 정기효(울산대학교 산업경영공학과) | Kihyo Jung (Department of Industrial Engineering, University of Ulsan) Corresponding Author