간행물
대한안전경영과학회지 KCI 등재 Journal of Korea Safety Management & Science
- 발행기관 대한안전경영과학회
- 자료유형 학술지
- 간기 계간
- ISSN 1229-6783 (Print)2288-1484 (Online)
- 수록기간 1999 ~ 2024
- 주제분류 공학 > 안전공학 공학 분류의 다른 간행물
- 십진분류KDC 530DDC 620
권호리스트/논문검색
제25권 제2호 (2023년 6월) 21건
1.
2023.06
구독 인증기관 무료, 개인회원 유료
This paper is proposing a novel machine scheduling model for the unrelated parallel machine scheduling problem without setup times to minimize the total completion time, also known as “makespan”. This problem is a NP-complete problem, and to date, most approaches for real-life situations are based on the operator’s experience or simple heuristics. The new model based on the Memetic Algorithm, which was proposed by P. Moscato in 1989, is a hybrid algorithm that includes genetic algorithm and local search optimization. The new model is tested on randomly generated datasets, and is compared to optimal solution, and four scheduling models; three rule-based heuristic algorithms, and a genetic algorithm based scheduling model from literature; the test results show that the new model performed better than scheduling models from literature.
4,000원
2.
2023.06
구독 인증기관 무료, 개인회원 유료
The Severe Disaster Punishment Act had recently been established in order to promote safety and health (OSH) management system for severe accident prevention. OSH management system is primarily designed based on risk assessments; however, companies in industries have been experiencing difficulties in hazard identification and selecting proper measures for risk assessments and accident prevention. This study intended to introduce an accident analysis method based on epidemiological model in finding hazard and preventive measures. The accident analysis method employed in this study was proposed by the U.S. Department of Energy. To demonstrate the effectiveness of the accident analysis method, this study applied it to two accident cases occurred in construction and manufacturing industries. The application process and results of this study can be utilized in improving OSH management system and preventing severe accidents.
4,000원
3.
2023.06
구독 인증기관 무료, 개인회원 유료
This study aimed to verify the validity of the evaluation items and weight determination of the indoor environmental safety area, which has the most frequent accidents, among the safety certification evaluations of educational facilities by the Ministry of Education of the Republic of Korea, which has been conducted since May 2021. As a preceding study, the evaluation items of the school safety evaluation checklist being implemented in the US state of Vermont were compared, and the causes of accidents judged by teachers in the accident experiences written by 200 Korean teachers were compared with the safety certification evaluation items belonged to the Ministry of Education. In addition, research literature using the AHP analysis technique on safety risks of elementary and secondary schools in China and safety evaluation index study cases of 539 elementary school children in Indonesia were analyzed. Through these preceding studies, measures to add and adjust evaluation items were derived and the validity and importance rankings of evaluation items were calculated through AHP questionnaires to teachers and safety experts. In addition, a survey was conducted on 104 ordinary people to verify the results of expert analysis. As a result of expert AHP analysis, 'safety education and disaster response training (.396)' was the highest priority for the relative importance of the first layer, followed by 'safety measures (.387)' and 'building materials'. Safety (.216)' was found to be the highest priority. In the overall importance ranking of the 13 second-tier screening items, safety accident prevention education had the highest priority and disaster preparedness training ranked second, proving that the Ministry of Education's review weight was underestimated. In addition, slip and collision accident countermeasures, which were not in the existing Ministry of Education review items, ranked 4th, laboratory practice room safety measures ranked 6th, and sanitation, cleanliness, hazardous substance management, and cafeteria/cooking room safety measures ranked 9th, indicating a significant level of importance. Referring to the importance ranking, which is the result of this study, it is suggested that it is necessary to review the weight of each review item again.
4,300원
4.
2023.06
구독 인증기관 무료, 개인회원 유료
Social welfare facilities are used by a wide range of local residents, including vulnerable populations such as the elderly, children, and people with disabilities. During emergencies like fires, confusion can arise as these individuals try to evacuate. Evacuation simulation results have shown that utilizing evacuation systems based on specific evacuation scenarios can significantly decrease the time required for evacuation compared to general evacuation procedures. By anticipating potential fires based on changes in social and facility environments, appropriate evacuation scenarios can be developed and applied to evacuation systems, thus contributing to the safety and security of individuals during emergencies. In conclusion, for social welfare facilities that serve a large number of people, it is necessary to expand the focus on performance-based design depending on the size of the facility, and to continuously develop and train for appropriate evacuation scenarios that align with changing facility environments.
4,000원
5.
2023.06
구독 인증기관 무료, 개인회원 유료
Recently, the crisis of demographic extinction is rising in Korea more than any other country, and it is difficult for industrial sites to maintain without 'foreign workers'. Industrial accidents and accident deaths of foreign workers account for 7.6% and 12.3% of the total, through an in-depth analysis of fatal accidents in the manufacturing industry, differences and similarities between fatal accidents of foreign workers and all fatal accidents were confirmed in terms of occurrence type, workplace size, length of service, employment type, etc. In this study, customized countermeasures were found.
4,000원
6.
2023.06
구독 인증기관 무료, 개인회원 유료
The purpose of this study is to explore how adolescents' psychological characteristics affect their sense of life safety according to gender. To this end, a survey was conducted on male and female high school students in six schools in the C area, and a total of 1,048 data were used for analysis. Differences in major variables according to gender were verified, and the effect of psychological characteristics on living safety awareness was analyzed through hierarchical multiple regression analysis. As a result of the analysis, depression, anxiety, type A characteristics, and the presence or absence of experience in accidents did not significantly affect life safety awareness in the male student group. On the other hand, in the female student group, anxiety and type A characteristics had a significant effect on life safety awareness. Anxiety negatively affects living safety awareness, and type A characteristics have been shown to have a positive effect on living safety awareness. The presence or absence of depression and accident experience did not significantly affect life safety awareness. The results of these studies suggest that gender differences should be considered in education to prevent life safety awareness and that education that reflects the psychological characteristics of adolescents is necessary.
4,000원
7.
2023.06
구독 인증기관 무료, 개인회원 유료
Previous works on safety behavior have paid less attention to the influence of several leadership styles on safety behavior. Among the various leadership styles, I focus on the effect of coaching leadership on safety behavior. To be specific, this paper investigates the impact of coaching leadership on safety behavior and its underlying mechanisms (mediator) as well as contextual factor (moderator). This research examines the sequential mediating effect of perceived organizational support and organizational identification in the association between coaching leadership and safety behavior. Also, work overload will negatively moderate the coaching leadership-perceived organizational support link. My results showed coaching leadership increases employee safety behavior through the sequential mediation of perceived organizational support and organizational identification. In addition, work overload functions as a negative moderator which diminishes the positive effect of coaching leadership on perceived organizational support.
4,200원
8.
2023.06
구독 인증기관 무료, 개인회원 유료
Since last year, the government has enforced the 'Act on the Punishment of Severe Accidents, Etc.' (hereafter referred to as the 'Serious Accident Punishment Act'), which punishes business owners and business managers who fail to fulfill their duty of safety measures with 'imprisonment of one year or more' and the Occupational Safety and Health Act. Based on this, various occupational safety and health policies were developed, including the operation of a system related to entrusting the work of safety managers. Despite these efforts, the effect of implementing the Severe Accident Punishment Act is a groundbreaking change in the current disaster prevention policy, which has increased by 0.02%P and 0.03‱P, respectively, from the previous year to 0.65% of the total accident rate and 1.10‱ of the death rate per 10,000 people as of 2022. As the need emerged, attention was paid to 'collaboration and governance with safety management institutions' in the 'Severe Disaster Reduction Roadmap' announced by the Ministry of Employment and Labor in November 2022. In this study, a meaningful result was derived by comparing and analyzing the industrial accident status of workplaces entrusted by “A” safety management institutions with the national average based on the industrial accident survey table, and the types of industrial accidents that occurred in consigned workplaces were selected as intensive management targets. The policy direction for industrial accident prevention was established. It is necessary to develop safety management work manuals based on the results of this study, expertise, discover best cases of risk assessment and develop guides, and educate and train consigned workers. In addition, it suggests that the government's guidance and supervision are needed to advance the professionalism of safety management entrusted tasks, and that safety management institutions should strengthen their roles and functions for preventing and reducing industrial accidents. However, due to difficulties in disclosing information of specialized safety management institutions, the limitation of the provision, collection, and viewing of research-related data to “A” specialized safety management institutions remains a limitation of the research. It seems likely that more thorough research will be conducted.
4,500원
9.
2023.06
구독 인증기관 무료, 개인회원 유료
The delivery truck is traveled around the delivery area for a long time. Truck drivers cause traffic accidents because of long hours of driving, fatigue, and speeding, etc. In this study, we will test the factors for preventing accidents of drivers. We would like to find factors that affect accidents and improve that can prevent accidents. As in the results of the study, accidents occur when traffic increases and profits increase among driver age, career, and profit factors. In addition, if the volume of traffic increases during the season, the number of accidents increases further. Therefore, in order to prevent truck accidents, a stable cargo quantity must be allocated to truck and cargo must be delivered.
4,000원
10.
2023.06
구독 인증기관 무료, 개인회원 유료
Ensuring the safe arrival of delivery cargo at its intended destination is of utmost importance. Truck drivers play a crucial role in guaranteeing the secure delivery of cargo without any mishaps. However, there are various factors that may lead to delayed arrival of trucks at their destination, such as late departures or prolonged loading operations. The timely departure of cargo transportation is contingent upon several variables, including the driver's experience, cargo volume, and loading time. If the transportation commencement is delayed, it may increase the risk of accidents due to an elevated operating speed. Consequently, we conducted a study to investigate the correlation between cargo loading time, cargo volume, driving experience, and the likelihood of accidents. Our findings indicate that both cargo volume and driver experience can impact the likelihood of vehicle accidents. Furthermore, all factors can have an interactive effect on the occurrence of accidents. However, extending the loading time may mitigate the impact on the likelihood of accidents.
4,000원
11.
2023.06
구독 인증기관 무료, 개인회원 유료
This study would analyze a survey conducted with 609 workers to use the results as materials for the settlement of safety culture for the characteristics of the establishment by assessing the status of the workers’ exposure to harmful risks and the impact on safety culture to present the following conclusions. This study has significance in that it found that exposure to harmful/dangerous factors in the establishment and the workers’ experiences of occupational accidents affect their perception of safety culture and that in particular, ‘worker safety priority’ of the safety cultural factors was an important factor, and it is judged that continuous studies are necessary so that the perceptions of safety culture will spread in the establishment.
4,000원
12.
2023.06
구독 인증기관 무료, 개인회원 유료
This study aims to empirically investigate effects of motion repetition and external load according to joint motion on discomfort through an experiment. Eighteen college students (female: 9; male: 9) participated in an experiment measuring perceived discomfort using the Borg CR10. Joint(wrist, elbow, shoulder and trunk) motion, its repetition and external load were adopted as independent variables. The results showed that all three independent variables were statistically significant on discomfort. Participants’ sex also significantly affected discomfort obtained in the experiment. While the interactions of joint motion and repetition, and joint motion and external load were not significant at α = 0.05, that of motion repetition and external load was significant. Based on the experimental results, four regression equations by the joints involved were presented, which could be used as a tool for evaluating postural loads by the joints. It may be postulated that based on the results of this study, scoring systems of RULA and REBA, and those of OWAS and REBA underestimates effects of motion repetition and external load, respectively. It is expected that the results of this study will be used as a basic data for developing an observational method properly reflecting the effects of motion repetition and external load.
4,000원
13.
2023.06
구독 인증기관 무료, 개인회원 유료
Occupational safety and health management expenses in the construction industry are statutory and separately included in the cost statement to prevent occupational accidents and health problems. The expenses are determined by multiplying the standard amount by the rate decided according to construction types and scales. However, the current expense appropriation method does not properly reflect the recent changes in the construction industry such as industry size, industry diversification, and social atmosphere about safety reinforcement. This study surveyed 1579 questionnaires in total and analyzed expense execution rate and proportion of each expense category. The expense execution rate was relative higher in complex construction (e.g., heavy construction = 126%, civil engineering = 125%) and long-period project (equal to or over 48 months construction = 133%) compared to general construction (98~116%) and short-period project (less than 48 months construction = 115%). The proportion of spending expenses was higher in the category of safety manager labor costs (25~52%), safety facility costs (22~40%), and personal protective equipment costs (10~25%). The analysis results of the study can be utilized in revising the standard expense appropriation method by reflecting the current usages of the occupational safety and health management expenses in the construction industry.
4,000원
14.
2023.06
구독 인증기관 무료, 개인회원 유료
Construction industry is considered as one of the most high-risk industries for work-related injuries and fatalities, accounting for more than half of fatalities in Korea. Advanced countries have recognized the critical role of designers in preventing construction accidents and have established regulations on design for safety. In line with this, the Korean government have also implemented regulations that require owners and designers to review the safety of design outcomes. However, it has been observed that designers face challenges in identifying hazards and integrating design solutions at the design stage mainly due to their shortage of required knowledge and skills. This study aimed to examine design solutions that can be applied to prevent fall accidents in the construction industry, and to establish a relationship between these solutions and fatal fall accidents occurred over the past three years in Korea. This study also analyzed the relationships of four variables (construction type, cost, work type, and fall location) with design solutions. The results indicated that all four variables have significant relationships with design solutions, with fall location showing the strongest relationship. The design solutions and their relationships with fatal fall accidents identified in this study can be utilized in identifying hazard and integrating design solutions to ensure design for safety.
4,000원
15.
2023.06
구독 인증기관 무료, 개인회원 유료
This study attempted to analyze the comparative advantage in terms of disaster safety costs in verifying the effectiveness and economic feasibility of the high-performance water-bulwark system in the pole tunnel, which was recently promoted as a part of the acceleration of vehicles. The tunnel to be analyzed was divided into a short tunnel(Anyang, Cheonggye) and a long tunnel(Suraksan, Sapaesan). As a result, it was analyzed that 25% of the improvement effect would occur if one lane was secured by applying the Water-Bulwark System. It was analyzed that this is because the time value cost, which accounts for a large proportion of the traffic congestion cost of short tunnels and pole tunnels, differs depending on the congestion time and traffic volume, not the length of the tunnel.
4,000원
16.
2023.06
구독 인증기관 무료, 개인회원 유료
This study aims to understand the current status of exemptions for traffic accidents during the return of emergency vehicles and to provide suggestions for improvement. A survey was conducted on 3,500 firefighters to investigate the perception of traffic accidents during the return of emergency vehicles, and responses from 505 participants were analyzed. Based On the demographic characteristics and perception of the participants, frequency analysis and variance analysis were used as research methods to analyze basic statistics and the current situation. The results showed that firefighters have concerns and anxieties about traffic accidents during the return of emergency vehicles, and the need for applying exemptions and enacting explicit legal provisions was statistically confirmed. Based on these results, we suggest a policy for exemptions to improve the preparation for re-deployment and to alleviate the concerns and anxieties of firefighters.
4,500원
17.
2023.06
구독 인증기관 무료, 개인회원 유료
This research was conducted to reduce the defect rate caused by nozzle clogging of printing heads used in binder jet 3D printers. The binder jet 3D printing technology may adhere to the printing head nozzle by dispersing powder due to mechanical operation such as transferring the printing head and supplying powder, and may cause nozzle clogging by natural curing at the nozzle end depending on the type of binder used. To solve this problem, this study created a cleaning module exclusively for printing heads to check whether the durability of printing heads is improved through analysis of printing results before and after using the cleaning module. To this end, this research used a thermal bubble jet printing head, and the used powder was studied using gypsum powder.
4,000원
18.
2023.06
구독 인증기관 무료, 개인회원 유료
The entire industry is increasing the use of big data analysis using artificial intelligence technology due to the Fourth Industrial Revolution. The value of big data is increasing, and the same is true of the production technology. However, small and medium -sized manufacturers with small size are difficult to use for work due to lack of data management ability, and it is difficult to enter smart factories. Therefore, to help small and medium -sized manufacturing companies use big data, we will predict the gross production time through machine learning. In previous studies, machine learning was conducted as a time and quantity factor for production, and the excellence of the ExtraTree Algorithm was confirmed by predicting gross product time. In this study, the worker's proficiency factors were added to the time and quantity factors necessary for production, and the prediction rate of LightGBM Algorithm knowing was the highest. The results of the study will help to enhance the company's competitiveness and enhance the competitiveness of the company by identifying the possibility of data utilization of the MES system and supporting systematic production schedule management.
4,000원
19.
2023.06
구독 인증기관 무료, 개인회원 유료
Currently, the budget for vocational competency development training has been expanded, but the number of participants has decreased. As the budget for the Vocational Competency Development Project increases, the participation of a large number of people becomes necessary. This study aims to derive factors that affect satisfaction by selecting factors related to respondent characteristics, training institutions, training types, and job performance for satisfaction with vocational competency development training, and to study ways to improve satisfaction. Data were collected through focus group interviews (FGI), and logistic regression analysis was conducted through feasibility review and reliability analysis. As a result, in the case of the model, it was confirmed that the degree of agreement between the case actually measured and the case predicted by the model was low in the Hosmer and Lemeshow test, but the overall classification accuracy was classified as 96.0% in the classification accuracy table. As for the influence of the factors, the result was derived that the application of knowledge technology, training institution facility equipment, Business Collaboration, long-term work plan, and satisfaction with work performed have an influence in the order.
4,000원
20.
2023.06
구독 인증기관 무료, 개인회원 유료
Prior studies focusing on safety behavior have not given sufficient consideration to the potential impact exerted by different leadership styles. Of these various styles, my attention is specifically drawn to the influence of ethical leadership on safety behavior. In this paper, I delve into the influence of ethical leadership on safety behavior, shedding light on both the underlying mechanisms(mediators) and a significant contextual factor(moderator). I probe into the successive mediating roles of employees' trust in the organization and their commitment to it, within the context of the relationship between ethical leadership and safety behavior. Further, I posit that authentic leadership positively adjusts the connection between ethical leadership and organizational trust. My findings underscore that ethical leadership enhances employee safety behavior, facilitated by the chain mediation of trust in the organization and organizational commitment. Moreover, I discover that authentic leadership, as a positive moderator, magnifies the favorable impact of ethical leadership on organizational trust. This paper will also articulate the theoretical implications, practical applications, and limitations of the study.
4,200원
1
2
