The existent system of management for Measurement of Safety Cost are not effective because of the data loss and time loss and occurrence of errors through manual calculation. Therefore, the development of the software for measurement of safety cost can solve the problem through the systematic calculation for safety cost and converting the related data to database, and also can build the strategy of the investment of Safety cost through analysing and comparing with the past data in the database. As a part of development of the software of Measurement of Safety Cost which is appropriate for the domestic environment, this study is developing a software based on Noguji method, which is one of the methods of Measurement of Safety Cost, and to appraise the efficiency of the management of Measurement of Safety Cost we will implement and improve the software in the case of the domestic enterprises.
Since the types and formats of the provided material and data are difficulties from one to another, difficulties have occurred in exchanging and sharing Information. Under such a circumstance, standardization and management of information or files have been a critical factor leading to an active and successful Electronic Commerce. XML(extensible Markup Language), which is a standardized format for data exchange via internet, has been recognized as a standard by World Wide Web Consortium(W3C). XML takes web environment as the interface, runs well even in a heterogeneous environment and saves data in a standardized format, therefore, it can be effectively used for creating and transferring standardized files. In this paper, a XML-based data processing system, which aims at supplementing the existing HTML-based shopping mall system and the methodology for constructing the system is presented with specific examples.
With the help of the Internet, communication with customers and the frequency and speed of the problem solving has improved greatly At this point mayor enterprises are paying much attention to CRM and their related markets are expanding rapidly I'll give a bnef introduction to the CRM system and go Into the problems that should be considered and which phase to emphasize when building this system.
Today's environment of enterprise is changing. They have to face customers' demands with the right product, the right service and supply them at the right time. And aIso cut down logistics and inventory cost and bring up the Profit as much as they can. This means the change of putting enterprise first in importance to putting customer first in importance. therefore to correspond to customer's demand, shorting lead time is becoming a essential condition. The answer to this changes of environment is supply chain management In this study, we use Goldratt's drum-buffer-rope scheduling in between manufacturer and supplier. And when shortage of inventory occur, search for the supply chain's CCR. Pressing CCR for more production, and supply Inventory from logistic center to guide for inventory buffing. using logistic warehouse between manufacturer and supplier, can execute function of buffer.
In the supply chain, The ATP function doesn't only give customers to confirmation of delivery. It can be used by the core function with ATP rule that can reconcile supplies and demands on the supply chain. Therefore We can acquire the conformation about accuracy on the due date of supplier by using the ATP function of management about real and concurrent access on the supply chain, also can decide the affect about product availability due to forecasting or customer's orders through the ATP. This study analyze the data concerned with ATP and define the necessity on a SCM solution. Under the these environments, after defining the ATP rule that can improve the customer value and data flow related the CRM, we propose the advanced ATP model that proposes the method and classification system that can flexibly aggregate the ATP data with ATP rule on the supply chain.
By successful establishment of SCM(Supply Chain Management) System they should make the supply chains speedy and combine production information system with the outcome system and thus they reinforce the competition of the production system of local enterprises in accordance with the rapid decision making This study is to develop the most appropriate production system models through the reflection of JIT system in the SCM which is the necessity of the times and its importance. To achieve this goal the researcher diversifies the prerequisites for the success of the business which will be the strategical factors of the production systems. The objects of this study is to develop the most appropriate production system models and to provide the enterprises with the models which are based on the SCM.
This study is based on Parasuraman, Zeithaml 8l Berry[19]`s SERVQUAL measure that develop for estimation of service quality, so this study proposes the present condition of customer service and improvement method on internet search engine. This study also develops a questionnaire for analyzing customer satisfaction considering the present condition of internet service. We're going to analyze the customer service quality that classified by search engines, service quality with university students who use usually internet.
In supply chain management, coordination between a manufacture and suppliers Is regarded as the most important issue when partnership of organizations of considered. This paper Introduces the current status of SCM in terms of physical systems, relation with other solution systems as well as the general history and definitions of SCM. Researches are categorized into deterministic, stochastic, and several future research areas are discussed in the paper.
Many production management systems for increasing productivity, minimizing inventory, keeping due dates and maximizing use of resources have been proposed, and GT, MRP and JIT are frequently used among these systems. The three systems have merits and demerits through comparing with each other. Because each system has mutual dependence, a hybrid production system Is necessary for using their merits maximally. In this study, a hybrid production system is designed by combining GT, MRP and JIT, which is suitable in the domestic production system and it is presented as followings. -. Basic research works for G7, MRP and JIT. -. Comparison and analysis are carried out for each system.- . The hybrid production system is designed. -. The hybrid production system is developed.
ISO 9000 has brought about significant positive effects to the quality management system and quality improvement. This paper develops effective and flexible ISO 9000 quality system based on telecommunication manufactured goods with CSU(Channel Service Unit), ADSL(Asymmetric Digital Subscriber Line), Fiber Optic Multiplexer, HDSL(High-bit-rate Digital Subscriber Line), FDSU(Flexible Data Service Unit), 73 DSU(Digital Service Unit). The case studies of venture telecommunication corporation in establishing ISO 9000 qualify system are also discussed.
Polyacetal resin is usually used to make molds, but it is difficult to achieve dimension accuracy during molding. Therefore it is usually necessary to cut the polyacetal resin after a molding process. Polyacetal resin is easily machining by standard machine tool. Acetal is also a thermal stable material which can be totted without coolant Another concern about the use of polyacetal resin is that it absorbs water easily, which also results in problems with dimension accuracy Therefore, in this study, the cutting resistance of water-absorbed polyacetal resin and its surface roughness after cutting in order to achieve the highest degree of accuracy in the cutting of polyacetal resin were investigated. Also, The Robust Design method uses a mathematical tool called orthogonal arrays to study a large number of decision variables with a small number of experiments. It also uses a new measure of quality, called signal-to-noise (S/N) ratio, to predict the quality from the customer's perspective. Thus, we have taken Taguchi's parameter design approach, specifically orthogonal array, and determined the optimal levels of the selected variables through analysis of the experimental results using S/N ratio.
Because of the inherent flexibility in their design for improved material properties, composites have wide applications in aerospace vehicles and automobiles. The purpose of this study is to investigate the energy absorption characteristics of CFRf (Carbon Fiber Reinforced Plastics) tubes on static and impact tests. Static compression tests have been carried out using the static testing machine(Shin-gang buckling testing machine) and impact compression tests have been carried out using the vertical crushing testing machine. When such tubes were subjected to crushing loads, the response is complex and depends on the interaction between the different mechanisms that control the crushing process. The collapse characteristics and energy absorption were examined. Trigger and interlaminar number affect the energy absorption capability of CFRP tubes.