When the foundation work of the underground part of the building structure or the excavation work of the civil engineering structure is carried out, there is the earthwork work by the inevitable process. As the economic situation continues to develop, construction in urban areas is becoming bigger and higher in scale due to the expansion of infrastructure and the rescue of urban dwellings in urban areas, and excavation of underground roads is inevitable. Excavation of the underground part may cause problems in the process difficulty and safety of the earthworks due to the complexity and various characteristics of the ground selected without consideration of the ground characteristics and site conditions. In order to complete the required facilities, it is necessary to secure the design and construction of the retaining walls. In order to complete the required construction, It is an important factor satisfying construction period and economical efficiency.

Among service industries of knowledge based economic era, the roles of educational service field are becoming more important and standard of educational service makes a direct effect on economic development and social growth. Therefore, accurate measurement of service quality is the most important assignment and the measurement of the service quality remains difficult assignment. So, this researcher classified quality attributes applying weighted value and found potential satisfaction level(PSL) and potential customer demand improvement index(PCDI) for trainees participating in national manpower business so as to suggest measurement of service quality and easiness of use and then, calculated satisfaction position and opportunity cost by quality factor with Taguchi’s loss fraction. And, improvable satisfaction level was measured, opportunity cost by degree of customer dissatisfaction was quantitatively measured, and a model that can indicate with economic factors was suggested. In addition, methodology of measuring quality cost that can be reduced by quality improvement and direction of strategic decision-making for deciding items to be improved preferentially were suggested with qualitative index that can indicate the degree of customers’ dissatisfaction by loss.

Logistics companies are worrying about securing of differential competitiveness so as to be competitive companies in keen logistics market. The ground is how users are satisfied by sell-established service system to respond not only economic feasibility of logistics costs but also diversity and advancement of logistics needs. The competitiveness of logistics companies is also caused by customer satisfaction of service and only companies finding and satisfying customer needs continuously may be more competitive. For the competitiveness, it’s the most important to analyze demands of current and potential customers and their pursuing value properly. Therefore, this researcher grasped PSL for online logistics service users with 5-point Likert-scale and quality-level decision method that consider the weighted value based on Kano model, measured customer’s potential Demand for service through PCDI, and suggested methodology for deciding the priority of the improvement with loss function of Taguchi.

This study investigates the enhancement of the oxygen diffusion rate in the cathode channel of a proton exchange membrane fuel cell (PEMFC) by pure oscillating flow, which is the same as the mechanism of human breathe. Three-dimensional numerical simulation, which has the full model of the fuel cell including electrochemical reaction, ion and electronic conduction, mass transfer and thermal variation and so on, is performed to show the phenomena in the channel at the case of a steady state. This model could analysis the oscillating flow as a moving mesh calculation coupled with electrochemical reaction on the catalyst layer, however, it needs a lot of calculation time for each case. The two dimensional numerical simulation has carried on for the study of oscillating flow effect in the cathode channel of PEMFC in order to reduce the calculation time. This study shows the diffusion rate of the oxygen increased and the emission rate of the water vapor increased in the channel by oscillating flow without any forced flow.

This study is intended to look into the effect of construction safety supervision system on risk control and reduction. To achieve this, a survey was carried out to 114 companies in construction, ordering, contract and management. The overall findings were as follows. The effect of construction safety supervision system on risk control and reduction showed that factors of supervision system, supervision cost and supervision method had a positive effect on risk control and reduction. And their perception of the introduction of safety supervision system in construction sites according to process showed that there was a difference between them according to the field of ordering, contract and supervision. There was the biggest difference between owner and contractor in double supervision system, but no difference between them in the perception of risk reduction. These results show that all ordering, contract and supervision are positively needed for the introduction of construction safety supervision. This means that there is a difference between owner and contractor in the perception of process according to system operation. All companies agree to system improvement by the settlement of safety supervision system for the prevention of safety accidents and safe construction, but the systematic complement of safety supervision is the burden of contractor. And there is a big difference between owner and contractor in the perception of responsibility and concern for cost burden.

This study aims to provide a real-time information to the driver by effectively operating the advanced safety device attached to the freight vehicle, thereby minimizing insecure behavior of the driver such as speeding, rapid acceleration, sudden braking, And improve driving habits to prevent accidents and save energy. Advanced safety equipment is a device that warns the driver that the vehicle leaves the driving lane regardless of the intention of the driver and reduces the risk of traffic accidents by mitigating or avoiding collision by detecting a frontal collision during driving.The main contents of this report are as follows: In case of installing a warning device on a lane departing vehicle (excluding a light vehicle) and a lorry or special vehicle with a total weight exceeding 3.5 tonnes, the driver must continue to operate unless the driver releases the function.In addition, when the automatic emergency braking system is installed, the structure should be such that the braking device is operated automatically after warning the driver when the risk of collision with the running or stopped vehicle in the same direction is detected in front of the driving lane.

Today, in the industrial structure of modern society, the problem of income redistribution more necessary multiple access by the empirical participation and study in department of industrial Engineering throughout perspective of not only cultural sciences but natural sciences The intent of this dissertation is the improvement of article for tax exemption of A house for A family in tax law that distorts income redistribution in our society.

The difference between the standard market price and the market price as a way to improve tax portal and leakage due to unrealistic the conversion of the base market value to the market it is imperative to secure tax revenue sources and function as income redistribution.

This study aims to provide a real-time information to the driver by effectively operating the advanced safety device attached to the freight vehicle, thereby minimizing insecure behavior of the driver such as speeding, rapid acceleration, sudden braking, And improve driving habits to prevent accidents and save energy. Advanced safety equipment is a device that warns the driver that the vehicle leaves the driving lane regardless of the intention of the driver and reduces the risk of traffic accidents by mitigating or avoiding collision by detecting a frontal collision during driving.The main contents of this report are as follows: In case of installing a warning device on a lane departing vehicle (excluding a light vehicle) and a lorry or special vehicle with a total weight exceeding 3.5 tonnes, the driver must continue to operate unless the driver releases the function.In addition, when the automatic emergency braking system is installed, the structure should be such that the braking device is operated automatically after warning the driver when the risk of collision with the running or stopped vehicle in the same direction is detected in front of the driving lane.

This study is performed to analyze the actual conditions of safety monitoring teams operating at a construction sites with high industrial accidents to derive more efficient methods and operational effectiveness. A fundamental study to improve the problems of the safety monitor's existing management system to provide more reasonable solutions will help prevent safety accidents.

In knowledge information society entering global unlimited competition era, our middle and small sized companies are the base of national and enterprise competitiveness and core base of national economy as an origin of jobs. The competitiveness of middle and small sized companies is so important to decide the level of the competitiveness of the whole industries, but the gap from big sized company is much low in comparison with advanced countries from angles of important factors of enterprise growth, productivity and technological competitiveness, so, it's urgent to improve the competitiveness through productivity enhancement. The purpose of this research is to do a positive study on effects of learning organization management outcomes of middle and small sized company on enterprise productivity among various types of outcome brought for strengthening of enterprise competitiveness. It confirmed learning organization has functions and usefulness as a management tool bringing positive effects on enterprise productivity through the Productivity improvement.

Recently, service quality must reflect several demands of customers who show rapid and various changes so as to be compared with the past. So, objective and rapid methods for them are necessary more. For them, first of all, service company must calculate their standard of service quality accurately by measuring service quality exactly. To measure service quality accurately, this researcher collected and analyzed data by survey for customers who are customers of logistics services, grasped potential satisfaction standard(P) by 5 point Likert scale and one survey for accurate classification of quality attributes through weighted customer satisfaction coefficient changing quality attributes by developing the study on Kano model and Timko's customer satisfaction coefficient, and suggested Potential Customer Satisfaction Improvement index(PCSI) for examining the improvement of customer satisfaction so as to utilize them as an index of differentiated and concrete measurement of service quality.

Logistics companies want to be competitive companies in fierce logistics market and are worrying about securing of differentiated competitiveness for it. The standards judging if logistics industry maintains the competitiveness are based on the satisfaction of users due to the well-established service system that can response not only economic feasibility of logistics costs such as transportation costs, storage costs, unloading charges, information costs, etc. but also diversity and upgradability of logistics needs. Therefore, this study focuses on seeking of service quality improvements with VBSD(Value Based Service Design) model focusing on customer value factors based on Kano model and QFD based service design approach from angles of customer value improvement and service costs reduction.

This researcher selected basic variable to investigate the effective relations of establishment and management of resting facility on reduction of constructional disasters and safety accidents and improvement of working efficiency for construction workers. Based on the measured variables, this researcher investigated phenomenon, recognition and satisfaction for using and demanding resting facility by long-term construction in construction site for workers of huge construction site in Seoul, conducted survey of total 219 questionnaires so as to grasp implications of workers' resting facility demanded in long-term huge construction site and effects on reduction of disasters and conducted structural equation analysis. As a result, resting faciity factor, management factor, and hygienic service factor were significant and resting and food factors were not significant. Therefore, it's expected to reduce personal disaster by improving quality of constructional resting facility, hygienic service, and resting facility management and especially, resting facility management factor makes lots of effects on prevention of personal disasters, so it was a strongly main factor. By suggesting the guideline of establishment and management service of proper resting facility through this research, positive recognition and constructional disaster reduction can be expected in construction site.

Among the industrial disasters caused by drop, ladder related drop disasters are occurred the mostly. The victims are occurred continuously. This study analyzed current situation of industrial disasters for recent 10 years(2005~2014) and compared・analyzed statistics of death disasters of ladder by workplace scale, age, occupation, employment type, working content, scarred area, etc. in detail. This study suggested direction of safety standard modification for ladder that is an original cause material of many drops, direction of safety training strengthening of small-scaled workplace, and safety model based on disaster statistics and should contribute to reduction of disaster rate for ladder working.

As industrialization progresses, mass production becomes a smart production system. However, industrial accidents do not decline, and during the course of industrialization, due to the logic of economic agents that have an economical and effective employment environment, they are changed to non-regular workers. The Occupational Safety and Health Act stipulates that the safety managers must be distinguished and the safety managers perform the task of conducting industrial accidents by balancing the duties and regulations specified in the Act on Special Measures for Deregulation. Safety administrators providing advice on issues needed to prevent industrial accidents and preventive measures We would like to present the problems and improvements that may arise due to safety managers ' replacement due to accidents caused by industrial accidents or accidents.

This study attempted to establish fire risk factors and preventive measures for each of five major types of construction, focusing on construction sites. For this purpose, disaster cases were analyzed and countermeasures were prepared. In addition, fire risk factors and flammable and combustible materials by construction type according to construction process were identified and preventive measures thereof were suggested. The results of this study can be used to establish policy improvement directions that meet various educational needs and expectations by identifying the use status of flammable and combustible materials and figuring out the fire risk factors according to the process by work type in construction sites.