간행물
대한안전경영과학회지 KCI 등재 Journal of Korea Safety Management & Science
- 발행기관 대한안전경영과학회
- 자료유형 학술지
- 간기 계간
- ISSN 1229-6783 (Print)2288-1484 (Online)
- 수록기간 1999 ~ 2024
- 주제분류 공학 > 안전공학 공학 분류의 다른 간행물
- 십진분류KDC 530DDC 620
권호리스트/논문검색
제12권 제4호 (2010년 12월) 36건
1.
2010.12
구독 인증기관 무료, 개인회원 유료
The purpose of this study is, by recognizing that recently, as crimes using information and various adverse-effect phenomena such as hacking and virus occur frequently with rapid development of information network such as Internet in every field of industry, the range of security is widening to the field of industrial areas for preventing the leaking of industrial technology and protecting that technology as well as information security only limited to IT area, and by establishing common concept about industrial security through education on the industrial security at the point of increasing importance of industrial security, to prepare the base of comprehensive risk management system for protecting company's assets (physical factor, technical factor and managerial factor) safely from the random threats or attacks inside and outside the company through assessment of important assets of the company, evaluation of threats and weak points, and risk assessment by building industrial security management system in order to protect company's information assets and resources which are connected to the existence of the company safely from the threats or attacks from inside or outside the company and to spread stable business activities.
4,200원
2.
2010.12
구독 인증기관 무료, 개인회원 유료
The occupational safety and health expenses in construction since 1988 has contributed significantly to the reduction of injury occurrence rate. But accounted basis and criteria used of the occupational safety and health expenses have been pointed out so many issues. The purpose of this study, perform analysis of the effectiveness of the occupational safety and health expenses through the reviewing of several issues about the current system and analysis of existing statistical data. Based on the result of the research, it is concluded that the contribution survey of the occupational safety and health expenses on the safety accident prevention program qualitatively evaluated as an average of 4.39(standard deviatin 0.652) on the five point scale based was very positive.
4,000원
3.
2010.12
구독 인증기관 무료, 개인회원 유료
There are two kind of method to perform a safety management in industrial field. One is a management by safety manager employed in company and another one is safety management by acting agency. In case of the company that managed by the acting agency dose not coincide with the state of company and safety management performance because of the safety management is carry out by periodically. Therefore it is considered that the sufficient safety management is difficult. And a company that employ a safety manager also show a low level of safety management compare with the advanced country in view of safety and health. From the statistics of accident rate of the company, it is necessary that an improved safety management through the studying and analysing a coverall matters for the company that managed by acting company.
4,000원
4.
2010.12
구독 인증기관 무료, 개인회원 유료
The purpose of this study was to examine the effects of stress response on safety behavior and to explore moderating effect of safety climate between stress response and safety behavior. 224 workers were asked to respond to the questionnaires that measured various demographic variables, stress response, safety climates and safety behaviors. A hierarchical regression was conducted to identify variables that had significant relationships with safety behavior and to examine moderating effect of safety climate between stress response and safety behavior. Results indicated that the depression response significantly predicted safety behavior. It was found that the safety climate was also a significant predictor for safety behavior. In addition, safety climate had a moderating effect on the relation between depression and anger responses and safety behavior.
4,000원
5.
2010.12
구독 인증기관 무료, 개인회원 유료
This paper describes the development of various lighting equipment adapting Ultra Constant Discharge Lamp that has newly been on commercial supply in the market. Meeting the required conditions of lighting equipment, various types of UCD Lamp equipment with excellent performances could be successfully developed. In order to provide a guideline for the economical lighting product selection, the analyzed data comparison between Hi-pressure Sodium Lamp which has been the most popular lamp for street lighting and UCD Lamp is provided. The conclusions of the study are made as follows; (1) The performance measurement result of UCD Lamp shows excellent Luminous Efficacy as 108Lm/W, daylight-like Color Rendering Index as 90Ra, and the best operating temperature range as -50℃~+85℃. Comparing to the Hi-pressure Sodium Lamp, UCD could be evaluated as much superior products. (2) In an assembled status with the lighting fixture (Type STB형-60W), UCD Lamp was tested OK for one hour duration at the temperature range form -50℃ to +85℃ and the humidity of 98%. The operation at the extremely low temperature can be an excellent feature to enable the export to the cold temperature regions such as Northern Europe and Russia and the specific applications for defense systems and special industry. (3) As UCD Lamp is a genuine Korea made product following Energy-saving and Eco-friendly policy, it should be appreciated as one of the best CO2 reduction Green product.
4,200원
6.
2010.12
구독 인증기관 무료, 개인회원 유료
When a fire breaks out, it is difficult to find out the causes of the fire, because combustible things around fire scene are usually burnt away. Among many causes of fires are electronic wires, this thesis deal with the destroyed sheath of electronic wires caused by fire. It was studied with the use of measurement devices focusing on the distinctions of wires and conductors. This study especially emphasized the process of deterioration, burning pattern, and composition of electronic wire conductor. It also has a phenomenological approach to the distinctive cause of fire by some partial force. The fire prevention methods have been suggested through the analysing results of fire patterns. This study is expected to be a useful material for analyzing various electrical fires.
4,000원
7.
2010.12
구독 인증기관 무료, 개인회원 유료
Organic light emitting diode(OLED) has been developed fast from 1963 when electric light emitting phenomenon was discovered. PMOLED(passive matrix OLED) is producted earlier than AMOLED(active matrix OLED). PMOLED is mainly mounted at sub display, but AMOLED is mounted at main display. Nowadays AMOLED is expanded to PMP(portable multimedia players), navigation and TV market. Even thought OLED's market is opening to many applications, OLED's life is worried until now. If we know about OLED's real life, we need time to test so much time over 20,000hrs. Realistically, there is difficult to test such as long time with products from the information-technology sector having a short life cycle. In this paper, we study about OLED's accelerated test to reduce life test by current. We can design OLED's accelerated life model by the result of test. The model consists of design variables like ratio of light emitting, organic material structure, condition of aging, etc. In conclusion, this model can be applied to study about organic material, machine and manufacturing process etc, and also it's possible to develop a method of manufacturing process & materials, so we need to study on the subject of this paper continuously.
4,000원
8.
2010.12
구독 인증기관 무료, 개인회원 유료
This study was done to provide basic data on the safety of professionals in medical imaging system by measuring the electromagnetic waves generated in the medical imaging system being used in medical organization. The studied medical imaging systems were general X-ray system, computed tomography(CT), ultrasonographic(USG) system, magnetic resonance imaging(MRI), PET-CT and fluoroscopic(R/F) system, and through these devices, electric field and magnetic field were measured and analyzed. As a result of the analysis, the measured values classified by the medical organizations were not much significant, but in the measurement by the medical imaging systems, there were high hazard elements in the sequential order of electric field PET-CT(17.7±22.9)v/m, CT(10.3±8.7)v/m, general X-ray system(8.8±8.8)v/m, magnetic field general X-ray system(5.06±8.26)mG, CT(2.71±4.53)mG and PET-CT(0.74±0.34)mG, the systems that adopted X-ray as main ray source, and the more aged the medical imaging systems, the greater the effects of electro-magnetic waves(10.6±15.93v/m for 5 years or more, 6.14±5.60v/m for 5 years or less). The effects of electromagnetic waves on medical imaging systems or facilities were not much when the notification of ministry of knowledge economy is considered, but in the overall perspective considering all the equipments and facility of the medical organization, such effects were significant. It is determined that sustainable safety managements of electric field and magnetic field must be done during process from medical imaging system installation to maintenance to rule out such factors.
4,000원
9.
2010.12
구독 인증기관 무료, 개인회원 유료
The purpose of this study was to investigate the actual conditions of radiation safety supervision in animal clinics using inspection standard of X-ray generator for diagnosis. The surveys for inspection standard system, equipment condition, and safety supervision were carried out in 18 animal clinics randomly. The inspection standard included reproducibility of dose exposure, kVp, mAs, collimator accuracy test, collimator luminance test, X-ray view box luminance test, grounding system equipment test and external leakage current test. The surveys of equipment condition and safety supervision used one-on-one interview with 5 points measurement. As a result, 44.44% of reproducibility of dose exposure was proper, 81.25% of kVp test was good, and 100% of mAs test was appropriate. Also, 66.66% of collimator accuracy test was proper, 61.11% of collimator luminance test was good, 53.13% of X-ray view box luminance test was suitable. In addition, only 5.55% of grounding system equipment and ground resistance was proper, 63.64% of external leakage current test was appropriate in grounding system equipment test. The 100mA electric capacity of X-ray generator for diagnosis was popular with 44.44%, and its 55.56% was purchased used equipment. Monthly average of less than 50 times (61.11%) was top frequency in use, and no animal clinic had a thermo-luminescence dosimeter(TLD). The 16 animal clinics with radiation safety zone and 2 without radiation safety zone were appeared.
4,000원
10.
2010.12
구독 인증기관 무료, 개인회원 유료
Despite the importance of cycling postures during cycling performances, there has been a very little research investigating cycling postures and pedaling rate for particularly concerning domestic cyclists. The aim of this study was to analyze correlations and effects between cycling postures and pedaling rate in track cycling. Twelve male racing cyclists (six racing and university cyclists) participated in this research. For this study, seven infrared cameras (Qualisys ProReflex MCU-240s) were used for collecting data and these were processed via QTM (Qualisys Tracker Manager) software. It appeared that pedaling rate had correlations with regard to a shoulder angle (R=-.601) and displacement between shoulder joints(R= -.637), but a knee (R=-.601) and ankle angle (R=.667). Moreover, two multiple regression equations of pedaling rate for cycling postures were significant and R2 of the first order equation y (pedaling rate) = 0.039x (knee angle) - 1.068 was less than the second order equation y = 0.006x2 - 1.287x + 69.674. In conclusion, cycling postures affected the pedaling rate. Further study should be researched on postures in relation to air resistance in a wind tunnel.
4,000원
11.
2010.12
구독 인증기관 무료, 개인회원 유료
The mask-face interface design should consider the face shape to improve the half mask respirator's fit ratio. This study tried to design the mask-face interface using recent Korean face data. By using the data of 1536 men's 3D face scanning (Size Korea data), head clay mock-up was made and mask-face interface line was extracted from this head mock-up. Using this interface line, the half-mask prototype was made. According to the quantitative fitting test, the proposed mask was found to be well fitted (average fit-ratio > 100). The proposed method had two advantages. 1) The method could use massive head-related anthropometric data like Size Korea data. 2) The qualitative fit test (observation) could be conducted very quickly by fitting the prototype to the head mock-up. However, this method also had several limitations. 1) The head clay mock-up could be different according to the mock-up maker. 2) The average values of the head-related anthropometric data were used to make the head mock-up. Small and large size head mock-ups should be made and tested.
4,000원
12.
2010.12
구독 인증기관 무료, 개인회원 유료
본 연구에서는, 반도체, LCD 공정에서 금속막을 증착하기 위하여 PECVD장비에 화재, 폭발 위험성과 독성을 가진 Silane가스를 사용하게 되는 장비인 gas cabinet, pipeline, VMB(Valve manifold box), MFC(mass flow controller)장비 등, 전반적인 시스템에 대하여 영국 HES의 ALARP개념을 도입하여 위험성 평가를 실시하여 문제점을 도출하고 대책을 강구 하는데 목적이 있고, 여러 가지 문제점중
4,000원
13.
2010.12
구독 인증기관 무료, 개인회원 유료
A Study on the Actual Condition of Counterplan for Product Liability in Small and Medium Enterprises
Product Liability is concerned with liability of a product itself. But, viewing from the management standpoint, Product Liability may have more significant influence on additional sales of the product after it has been supplied into the market. With regard to this, this study tried to make the following: First, this study examined the concept of 'Product Liability and enterprises' management attitude toward Product Liability. Secondly, through the case-analyses of Product Liability, a correlation study had been attempted to know the influence of corporate cultures and product safety activities on business management. Thirdly, this study tried to find the directions of Product Liability at the level of total management strategy.
4,000원
14.
2010.12
구독 인증기관 무료, 개인회원 유료
To give a solution to solve personal information problems issued in this study, the domestic and overseas cases about information security management system including an authentication technique are analyzed. To preserve the outflow of personal information, which is such a major issue all over the world, a new security audit check list is also proposed. We hope this study to help information system developers construct and operate confidential information systems through the three steps: Analysis of risk factors that expose personal information, Proposal to solve the problem, Verification of audit checking items.
4,000원
15.
2010.12
구독 인증기관 무료, 개인회원 유료
Today, many companies have introduced an ERP system - an enterprise resources planning - in order to improve corporate credibility through transparent management and for quick responses to market situations through quick decision making. After the construction of an ERP system, many companies are having difficulty in calculating the appropriate number of personnel required for running the system because of a lack of standard for doing so, as well as a lack of pertinent procedures. As a result, the companies are having to resort to a trial-and-error approach. Therefore this paper studied a model for calculating the appropriate number of personnel required for efficiently running an ERP system after its construction, as well as for constantly meeting its performance targets. The developed model was applied empirically to calculate an appropriate number of personnel required, and an organization was set up according to this. Therefore, the purpose of this study was to present an optimized model for calculating the number of personnel required for operating an ERP system, that which addresses problems of existing models, in order to help companies organize the operation personnel and its size, as well as to provide more objectivity to the calculated number of personnel required and to improve credibility.
4,000원
16.
2010.12
구독 인증기관 무료, 개인회원 유료
The today many companies are tilting to enjoy the dominant position in the globalization of global market. The past business management is focus on the price and quality, but many companies are doing our utmost for customer satisfaction of various needs of customers. Therefore, The efficient logistics management is a core element in the competitiveness of company that respond more quickly and effectively to market. Now, The companies are building an integrated SCM(Supply Chain Management) system that is able to manage and operate procurement, production, distribution & logistics activity. Among the IT infra, The RFID technique is received special attention for this successful SCM System, continuously it is being researched and developed. Also, they recognize RFID techniques that offer various services at supply chain flow, create value of company. This study propose implications in other industry for biz model development and direction based on RFID in many industry through case study for development of the distribution logistics information system on using RFID.
4,200원
17.
2010.12
구독 인증기관 무료, 개인회원 유료
The small and medium construction companies are facing potential EHS(Environment, Health & Safety) of major accidents to cause casualties or a financial loss and increasing social responsibility. So, they have to voluntarily accomplish the EHS management system rather than passively with regard to EHS regulation. In this study, the framework of integrated EHS management system is developed based on cloud computing, and construction companies are to materialize self-regulation EHS process of construction workplace and to standardize the total EHS business process using the developed system. The proposed system also provides risk analysis, education/control and continuous improvement for EHS tasks and users can easily access the system on the web at a low price through cloud computing service. Eventually, the integrated system contributes to the managerial improvement by minimizing economic and physical loss caused by construction accidents.
4,000원
18.
2010.12
구독 인증기관 무료, 개인회원 유료
It seems that a primary concern of the project-based company, which provides a large scale product or service over long term period, is to run a successful project through systematic project process control and control costs. One of the typical project control methods is Earned Value Management System(EVMS) which analyses the precess through performance measurement. Even though the EVMS is a highly efficient tool in the managerial aspect, it cannot easily determine the Planned Value(PV), Actual Cost(AC), or Earned Value(EV) due to the indistinct criteria and extensive data. The accurate calculation of AC in particular, is the basic of project management, but most companies record direct personnel expenses or direct expenses only. Since they calculate indirect expenses based on the estimated ratio, it limits the systematic project management that reflects changes in profit and loss of a company. This study introduces a EVMS for project management and its actual case based on EVMS and ERP system which some additional modules are installed for performance measurement. It is expected that this new method enables a company to save time and effort, and also to improve transparency by specifying expense items in detail and to switch quarterly settlement to monthly by reducing the time of calculation.
4,000원
19.
2010.12
구독 인증기관 무료, 개인회원 유료
In this paper, effects of information sharing in multi-level supply chain management have been studied through simulation. The simulation model consists of a manufacturing company as a center, three suppliers, two logistic centers, and three different retail supply lines of each logistics centers. The mathematical model and the simulation were developed when real-time information sharing occurs and does not occur in supply chain under the assumption that each company applies (s, S) inventory policies. In addition, this paper analyzed the effects of the change of variables related to total costs, which compose of total ordering cost, total transportation cost, total carrying cost and shortage cost that are caused by the change of demand of three different patterns with the way of information sharing.
4,000원
20.
2010.12
구독 인증기관 무료, 개인회원 유료
RFID has been used as an identification tool substituting bar-code and its application areas are increasing due to its suitability in ubiquitous environment. This paper reviews RFID applications in some areas in which a serious amount of applications were reported such as material handling, physical distribution, and supply chain management of perishable products. The authors try to suggest research issues along with the limitations of RFID.
4,000원
1
2
