간행물
대한안전경영과학회지 KCI 등재 Journal of Korea Safety Management & Science
- 발행기관 대한안전경영과학회
- 자료유형 학술지
- 간기 계간
- ISSN 1229-6783 (Print)2288-1484 (Online)
- 수록기간 1999 ~ 2024
- 주제분류 공학 > 안전공학 공학 분류의 다른 간행물
- 십진분류KDC 530DDC 620
권호리스트/논문검색
제8권 제4호 (2006년 8월) 18건
1.
2006.08
구독 인증기관 무료, 개인회원 유료
의사결정나무 알고리즘은 데이터마이닝 기법중 하나인데 관심이 되는 데이터들에 대하여 분류 및 예측을 가능하게 해준다. 이 기법은 데이터 형태의 특성을 분석할 수 있고 산업재해 형태의 차이점을 찾아내는데 사용될 수 있다. 본 연구에서는 산업재해 데이터의 특성을 파악하고자 C4.5 알고리즘을 사용하였다. 본 연구에서 분석을 위하여 사용된 데이터는 강원도에서 발생한 2년 동안의 산업재해 관련 데이터로서 연구에 적용된 데이터의 수는 19,909개로 구성되어 있다
4,200원
2.
2006.08
구독 인증기관 무료, 개인회원 유료
Grip strength provides a quick and objective index of the functional integrity of the upper extremities. It is widely used as an assessment measure in physical and rehabilitation medicine. In this study, maximum voluntary grip strength of 20 college students wearing 5 different gloves were measured using Jamar hand dynamometer. The results show that maximum voluntary grip strength was generally reduced when wearing gloves as compared to bare-handed. More specifically, the grip strength was highest when wearing PVC coated glove or bare-handed and getting lowered as wrist band, rubber, leather, and cotton glove in these order. Depending on the measuring posture of grip strength, shoulder height with arm extended forward was higher than the elbow was flexed 90 degree. Moreover, subjects' demographic factors and hand dimensions were not closely related to the grip strength. It is thus recommended that the proper glove should be provided to reduce the negative consequences including dropping a tool, poorer control of a tool. lower quality work, and increased muscle fatigue and in turn to increase the user safety and satisfaction.
4,200원
3.
2006.08
구독 인증기관 무료, 개인회원 유료
Critical incident can be happened at any time, any places without any pre-notification. For minimizing the loss of the life safety, financial and so on caused by the risk, most of company needs a system what can activate the critical incident management plan to prevent, plan for and respond to events that become critical incident. But a lot of company still don't have such a detailed system in our country and almost company has no effective training way for to boot. This paper shows the way to activate the risk management system to work efficiently the plan. The training way, proposed by this paper, is a incident command simulator based on virtual reality and scenario generation software.
4,500원
4.
2006.08
구독 인증기관 무료, 개인회원 유료
Based on the practical process engineering design and commissioning and startup operation experiences focused on chemical process safety, the comprehensive review of engineering design and installation of the thermal relief valve with its surrounding facility in a chemical plant piping system is provided to enhance the better understanding of the piping system of characteristics of thermal relief valve which is comprised of the theoretical approach, correlation in terms of temperature and pressure increase caused by external heat supply in a piping system, consideration of thermal relief valve engineering design, pressure relieving system of serial thermal relief valves and exception of their installation. It is earnestly suggested that following topic should be implemented during thermal relief valve engineering design, installation and normal operation as well.
4,500원
5.
2006.08
구독 인증기관 무료, 개인회원 유료
The purpose of this study is to explore the correspondence level to product Liability in the enterprises. The results of this study are to offer basic information for a planned manufacturing system for safety products. Especially important things are build up the foundation of system and abide by it for safety products. The producer and supplier(distributors) of the products should satisfy the increasing consumer safety needs. This survey show us that manufacturing the safety products is important factors for korean enterprise management. But, in the reverse, neglect to take appropriate measures promptly.
4,000원
6.
2006.08
구독 인증기관 무료, 개인회원 유료
Recently, the technology is getting to be the most important factor for companies, as the industry is changing fast. The uncertainty and complexity of technology valuation arc higher so that the technology concentrated companies need more developed and high performance technology. This paper reviews the methods of technology valuation for five categories that have been developed by valuation researchers, (1) research of technology diffusion and acceptance model, (2) research of technology valuation, (3) research of technology import and export factor, (4) research of technology valuation model, (5) research of technology transfer and market. And we propose a new technology valuation model using need(market), seed(technology) and deeds(management) factor by cross impact matrix. This model gives us the reference negotiation range for deciding the amount of royalty. I hope this paper induces more research on this field of technology valuation.
6,600원
7.
2006.08
구독 인증기관 무료, 개인회원 유료
본 논문은 Contour Crafting(CC) 프로세스의 압출과 적층 단계에서 물질 흐름의 형태를 연구하기 위한 실험과 모델링을 보여준다. 특히, 실험재료로써 진흙을 이용한 압출과 적층 메커니즘을 이해하기 위하여 기초적인 유한성분분석(FEA)을 실행하였다. FEA 시뮬레이션을 이용한, CC의 성능에 있어서 압출구멍의 기하학적인 효과에 대한 분명하고 기본적인 이해를 하게 되었다. 네모난 형상이 원하는 외부 표면특성을 만드는 것뿐만 아니라, 그리고 층간에
5,100원
8.
2006.08
구독 인증기관 무료, 개인회원 유료
This paper deals with the middleware development for real time data processing using ubiquitous RFID(Radio Frequency Identification). This middleware system supports the real time data gathering, filtering, and collaborative operations within SCM. We expect to decrease the data processing cost and to upgrade the status of RTE(Real Time Enterprise) and competitive power of company.
4,000원
9.
2006.08
구독 인증기관 무료, 개인회원 유료
This paper deals with the middleware and S/W development of real time automatic attendance check management system using ubiquitous 900Mhz RFID(Radio Frequency Identification). This system supports the real time automatic attendance check and necessary data processing in class management. We expect to decrease the effort for class management and to upgrade the status of real time management of class.
4,000원
10.
2006.08
구독 인증기관 무료, 개인회원 유료
Six sigma, contrary to TQM, offers the concrete process for accomplishing the management innovation. Nowadays it has become as a standard means. Many companies claim to stand for durable management and would like to get customers' satisfaction and more profit with total six sigma activities. Under the present conditions we propose how to maximize efficiency with six sigma application on transportation management that is an issue among many companies.
5,700원
11.
2006.08
구독 인증기관 무료, 개인회원 유료
One of The standard issue in riding on the wave of the information system(IS) is records of performance, grow unprecedently fast, and has highly uncertain future. Within the framework of IS Evaluation, The main purpose of this study is to suggest performance quality evaluation system as follows, The Integrated Quality Evaluation Model Design(IQEMD) of Information System helps corporations to improve productivity, customer service and corporate competitive power. To respond flexibly this trend, we have to realize that the information system has to keep the most effective optimal information network at the proper time. The existing evaluation method has been concentrated on the evaluation of a degree of the information system maturity focused on static viewpoints. The evaluation of potential factors to affect the future-oriented performance, that can analyze both unit business being able to apply an information system base was used efficiently well and what performance evaluation item was obtained actually, was insufficient relatively. In this paper, An integrated quality evaluation method will analyze a degree of information system maturity in dynamic evaluation viewpoints rather than in static evaluation viewpoints. finally we estimated the relative degree of importance of each determinant using the AHP methodology The validity of the proposed model was also partially proved using two different methods, holistic and historical approach.
4,900원
12.
2006.08
구독 인증기관 무료, 개인회원 유료
The ANP(Analytic Network Process), though based on the AHP(Analytic Hierarchy Process), is a system for the analysis, synthesis, and justification of complex decisions with the capability to model non-linear relations between the elements. ANP allows the decision makers to leap beyond the traditional hierarchy to the interdependent environment of network modeling. The ANP is designed for problems characterized by the added complexity of interdependencies such as feedback and dependencies among problem elements. Using a network approach makes it possible to represent and analyze interactions, incorporate non-linear relations between the elements, and synthesize mutual effects by a single logical procedure. This study intends to evaluate the contribution of technology in intangible assets by the AHP and ANP.
4,600원
13.
2006.08
구독 인증기관 무료, 개인회원 유료
The purpose of this thesis addresses a development of an expert system to support a decision making of the vender selection. The researches related to the vender selection problems have been studied and they provide 23 criteria to select proper venders. In this thesis, 8 criteria have been used to construct a knowledge base of the expert system. The system in this thesis consists of 6 steps in its procedure. Step 1 decides a specification that satisfies customer's needs and Step 2 chooses a part supplied by a vender. The type of an outside order is decided in Step 3 and some venders satisfying the customer's needs are selected in Step 4. Some of the venders chosen from step 4 which do not satisfy the fatal cirteria(that is Quality, Delivery, Price) can be deleted in Step 5. In the last step, 8 cirteria is used to select 3 venders according to their ranking. Consequently, this program provides for a man, who does not have the experiances, an efficient way to select appropriate venders in the vender selection problems.
4,500원
14.
2006.08
구독 인증기관 무료, 개인회원 유료
This paper deals with a batch processor model in which the batch processing speed depends on the jobs assigned to the batch. Each job is completed by accomplishing its required job processing quantity which is calculated as job speed product processing time. Its speed is given as not the exact value but the range. Thus the batch sets are constructed by the jobs which hold the speed in common. And the batch sets are processed as soon as possible. We developed the model to described the problem situation and adopt the total tardiness as the decision criterion.
4,000원
15.
2006.08
구독 인증기관 무료, 개인회원 유료
Multi-criteria decision making is deducing the relative importance in the criterion of decision making and each alternative which is able to making a variety of choices measures the preferred degree in the series of town ranking criterions. Moreover, this is possible by synthesizing them systematically. In general, a fundamental problem decision maker solve for multi-criteria decision making is evaluating a set of activities which an considered as the target logically, and this kind of work is evaluated and synthesized by various criterions of the value which a chain of activities usually hold in common. In this paper, we use the compensatory models for the optimal decision making. For the purpose of optimal decision making, the data of five different car models are used in Europe.
4,600원
16.
2006.08
구독 인증기관 무료, 개인회원 유료
Many corporations are accepting various kinds of business reform techniques to be adapted and overcome in this e-Business period. Among these techniques, team-organization is selected most in person/organization field. The introduction of team-organization is more needed and spread, so many corporations actually constructed team-organization formation form. But the result has not been active. Therefore after team-organization is introduced to improve the performance evaluation of team management, the result of team management performance should be correctly measured to find out and settle the problems of team-organization. The purpose of this research presents the development of the model of team-management performance evaluation and the method of the proper measurement based on BSC.
5,500원
17.
2006.08
구독 인증기관 무료, 개인회원 유료
This paper is to propose new features and models for process innovation after classifying in three categories ; conventional six sigma, lean six sigma and 3rd generation six sigma. First considering two project types which are bottom-up and tod-down, DMAIC process is linked up with QC story 15 steps. Secondly, I present Koreanized lean six sigma model using Japanese production technology and principles. Lastly, this paper also depicts a new 3rd generation six sigma model utilizing MBNQA management quality system.
4,000원
18.
2006.08
구독 인증기관 무료, 개인회원 유료
A life cycle assessment(LCA) is increasing its applicability as a powerful tool for an environmental burdens analysis. In this study, some cases are compared in terms of analysis procedures and results obtained with LCAs for evaluating power generation technologies in Korea. For the comparison, 3 power generation technologies are selected because they produces almost 90% of 2003 total electricity generation in Korea. It is shown that the range of evaluation values amounts to maximally the order of about 105, which is rather large discrepancy than the level of 101 in comparison with foreign studies. The difference seems to be due to the simplicity of modeling used in each case study. It is proposed that this large discrepancy should be obviously clarified to improve their reliability in that electricity is a essentialness for all industries and the capacity of LCA of national-level electricity affects the results of LCA for the other sectors.
5,100원
