간행물
대한안전경영과학회지 KCI 등재 Journal of Korea Safety Management & Science
- 발행기관 대한안전경영과학회
- 자료유형 학술지
- 간기 계간
- ISSN 1229-6783 (Print)2288-1484 (Online)
- 수록기간 1999 ~ 2024
- 주제분류 공학 > 안전공학 공학 분류의 다른 간행물
- 십진분류KDC 530DDC 620
권호리스트/논문검색
제9권 제2호 (2007년 4월) 19건
1.
2007.04
구독 인증기관 무료, 개인회원 유료
Safety check-up and individual education, safety status wishes to present included safety assessment table for safety management assessment system construction about unit work process in Study. Safety management assessment table gives each grades about worker of unit work process, safety check-up, education, management and identifies merits and demerits of unit work process, it is that propose safety management assessment system that can reduce accident occurrence possibility.
4,000원
2.
2007.04
구독 인증기관 무료, 개인회원 유료
There is no universally agreed classification of human error, nor is there one in prospect. Thus, a taxonomy is usually made for a specific purpose. To seek the types of human errors in the environment of man-machine interface under the railway industry, we develop a cognitive information processing model incorporating the human's mental states. Using the model, this study investigates the types of human errors about the railway workers. Thus, a survey is conducted for railway safety personnel-locomotive engineers, station employees, and train commanders- in Korean railway company. Through the survey that is designed to investigate four types of human errors from the Questionnaires composed of thirty Questions, we analyze the types of human errors related to railway safety according to affiliated offices, operation shifts, age, and working years. Finally, from the insights of the results some guidelines for the railway safety management are presented.
4,000원
3.
2007.04
구독 인증기관 무료, 개인회원 유료
If you examine the Industrial Disaster Analysis Content that occurs every year in the small and medium enterprise, industrial disaster occurs because of manager's lack of safety and worker's unprepared safety education. Therefore effective safety education systems are needed to offer adequate knowledge and technology to the workers. On this research, to give an effective education way to decrease industrial disaster we administered to the workers who are in charge of 300 workplace in Incheon area to search actual condition of industrial disaster and to disclose a link between industrial disaster and industrial safety education. We put in effect on frequency study and examined x2 using SPSSWIN 10.0. On the research, the results shows that the industrial safety education and training are in effect regularly and the satisfaction are low. But the manager's satisfactions are high through safety education. So it shows that we need to find a way to put in effect safety education to satisfy the workers.
4,500원
4.
2007.04
구독 인증기관 무료, 개인회원 유료
The goal of this study is to propose the effective method of investigating the injurious factors and making improved plans that prevents the workers against musculoskeletal disorders at an autopart company and the same business field with similar working conditions and process. A questionnaire were adopted to analyze the symptoms of workers' musculoskeletal disorders, and an ergonomic assessment method such as QEC, RULA, S.I were performed to find out harmful factors of workplace and working posture. Based on the result of the evaluation, to enhance the working environment, improvement of worktable, working space, tools, and outfit was suggested, and induction of mechanical system was also suggested. It can be concluded that the method and process described in this paper could be helpful for diagnosing the musculoskeletal disorders and making improvement plans to the autopart company and the same business field with similar working conditions and process.
4,900원
5.
2007.04
구독 인증기관 무료, 개인회원 유료
This Study is to suggest a method of effect evaluation of forest fire on governor station in shrub land. Theoretically, to evaluate effects of forest fire, it is combined that Spread Rate of Forest Fire, Flame Model, and Thermal Radiation Effects Model; i.e. a travel time of forest fire is calculated by Spread Rate of Forest Fire, fire-line intensity is calculated by Flame Model, and effects of fire-line intensity is affected by Thermal Radiation Effects Model. With the aforementioned method, we could carry out the effect evaluation of forest fire on governor station in shrub land and could distinguish scenarios to need protection plan from all scenarios.
4,000원
6.
2007.04
구독 인증기관 무료, 개인회원 유료
The main objective of this study is to suggest the new sizing system proper to the boys in the high school students by classifying their somatotype for the development of educational environment and uniform. The sample for this work was chosen from data which were collected and measured by Size Korea during two years (2003~2004). In order to analyze feature of the somatotype of boys in the high school students, analysis was performed about 479 subjects on 37 body parts such as height (9 parts), width (5 parts), thickness (6 parts), circumference (7 parts), length (8 parts), body weight and Rohrer Index. The result of this study can be utilized in various fields such as design of classroom, student uniforms, facilities and equipments for education at high school and university, etc.
4,200원
7.
2007.04
구독 인증기관 무료, 개인회원 유료
This study created a computerized information system of the collected job analysis data and analyzed the computerized job analysis data to derive critical job factors. Based on the ratings on each critical job factor, possible employment opportunities for the various types of disability could be derived according to the match between job condition and handicap condition. The results can be utilized by the Employment and Vocational Training Administration to expand both the counselor and counselee's perspectives about job possibilities and job requirements.
4,500원
8.
2007.04
구독 인증기관 무료, 개인회원 유료
Because the damages of corrosion resulting from the chloride ion are very serious, many research studies have been performed to measure the penetration depth of the chloride ion. However, there is a problem with data selection obtained from collection during experiments. After careful study, it appears that the collected data are not conformed to a normal distribution. The result of this study will play a very important role, as a first step for the development and construction of a forecasting system to help determine a reliable service lifetime of marine structures.
4,200원
9.
2007.04
구독 인증기관 무료, 개인회원 유료
In risk assessment, there are several methods such as Safety Review, Checklist, FMEA(Failure Mode and Effect Analysis), FTA(Fault Tree Analysis), ETA (Event Tree Analysis) etc, however, the level of accident is indentified by the probability of accident and severity resulting from accident which used widely in assessing accidents and disasters. In this paper, the risk assessment method to decide the level of risk will be introduced by using severity, frequency and detection according to accident theory.
4,800원
10.
2007.04
구독 인증기관 무료, 개인회원 유료
Recently, the strategy of the age of limitless competition for existence of manufacturing company appears for the enhancement of productivity through the automatic system, the reduction for the cost for standardization and the decision making process for the information system. Especially the critical success factors in manufacturing company can be summarized for the establishment of production visibility through the production management, material & work-in-process management, the establish of the flexible manufacturing system for the changed order priority and the establish of the quality system for improvement of product and process quality. The existing production management systems supply only simple information about production results on real time, can delay quick decision making. And it can prevent acquiring the information about various customer needs and the communication problems with other systems. In this paper, it will show MES system, a solution for the problems of existing production management systems. And through a case study of D company, it will reveal improvement effect on shipment error using MES system and economic analysis for MES itself.
4,000원
11.
2007.04
구독 인증기관 무료, 개인회원 유료
This paper focuses on the in-house reliability assurance plan for the bulk materials of each company. The reliability assurance needs in essence a long time and high cost for testing the materials. In order to reduce the time and cost, accelerated life test is adopted. The bulk sampling technique was used for acceptance. Design parameters might be total sample size(segments and increments}, stress level and so on. We focus on deciding the sample size by minimizing the asymptotic variance of test statistics as well as satisfying the consumer's risk. In bulk sampling, we also induce the sample size by adapting the normal life time distribution model when the variable of the lognormal life time distribution is transformed and adapted to the model. In addition, the sample size for both the segments and increments can be induced by minimizing the asymptotic variance of test statistics of the segments and increments with consumer's risk met. We can assure the reliability of the mean life and B100p life time of the bulk materials by using the calculated minimum sample size.
4,300원
12.
2007.04
구독 인증기관 무료, 개인회원 유료
이 논문은 CC 프로세스의 movable side trowel 효과를 연구하기 위한 실험과 모델링을 제시한다. FEA simulation을 이용하여 우리는 movable side trowel의 효과와 움직임에 대한 기초적인 이해를 얻어냈다. 단면의 side trowel 보다 양면의 side trowel이 실제의 3D 형상을 만드는 동안에 층간의 최적의 결합을 만들어 준다는 면에서 가장 적합하다는 것을 알아냈다. 우리의 실험이 위의 결과를 입증하였다.
4,500원
13.
2007.04
구독 인증기관 무료, 개인회원 유료
This paper is to propose two computation procedures of reliability measures for large interval data. First method is efficient to verify the relationship among four reliability measures such as F(t), R(t), f(t) and λ(t). Another method is effective to interpret the concept of various reliability measures. This study is also to reinterpret and recompute the errors of four reliability measures discovered in the reliability textbooks. Various numerical examples are presented to illustrate the application of two proposed procedures.
4,200원
14.
2007.04
구독 인증기관 무료, 개인회원 유료
This paper presents three methods for expression of reliability measures for large and small data. First method is to express parametric estimation of cardinal reliability measure data for large sample, which requires numerous sample. Second is to obtain nonparametric distribution classification of ordinal reliability measure data for small sample. However it is difficult for field user to understand this method. Last method is to acquire parametric estimation of ordinal reliability measure data for small data. Because this method requires small sample and is comprehensive, we recommend this one among the proposed methods. Various reliability rank measures are presented.
4,000원
15.
2007.04
구독 인증기관 무료, 개인회원 유료
Over ten years, 6sigma management is applied a lot in the part of indirect business as well as the manufacturing industry. But it has still been used restrictively the technique used on DMAIC that is a basic Roadmap of 6 sigma. This paper finds the improving skills that is used in the parts of manufacturing and indirect business and demonstrates their available scope with 6sigma projects. And this indicates which skills for improving are used valuable on each step of DMAIC with a systematic classification.
4,200원
16.
2007.04
구독 인증기관 무료, 개인회원 유료
1. Through this experiment, we made certain that the best distinguished frequency area of the Hyundae Beta 2.0 engine's knocking is 6.8khz. 2. Through the experiment, we checked the output power voltage condition of the logging output with the generation of a engine knocking. And wechecked up that it generated maximumly up to 11.4 V which depends on the degree of the streng.
4,300원
17.
2007.04
구독 인증기관 무료, 개인회원 유료
The purpose of this study is to explore the applicability of AHP(Analytic Hierarchy Process) to select more productive projects among various proposed projects in a particular company. To achieve this research objective, the characteristics of project evaluation and selection are first reviewed with respect to when, where, and how the decision is made. Then the theoretical basis of the AHP is briefly reviewed along with its mathematical underpinnings to construct the framework of project evaluation and selection. To be more specific, the evaluation and selection criteria were reorganized in the AHP-based framework to make the process of project evaluation and selection more productive. Project evaluation and selection is one of the most important activities for the most companies to be more advantageous in the market. Despite the importance of decision making process of project selection, not many of how to choose the best project were suggested as the reliable project selection methods in the industries. It may be because it involves various activities related to conflict resolution among different evaluation criteria, high uncertainties of market, and the unclear tradeoff among various project objectives. Furthermore, the decision, once made at this point, tends to be irrevocable until the whole process turns out to be a complete success or failure. As the result, the AHP method showed better financial performance rather than the traditional method in a case study.
5,500원
18.
2007.04
구독 인증기관 무료, 개인회원 유료
Even though the ad hoc Shewhart methods remain controversial due to various mathematical flaws, there is little disagreement among researchers and practitioners when a set of process data has a skewness distribution. In the context and language of process control, the error related to the process data shows that time to signal increases when a control parameter shifts to a skewness direction. In real-world industrial settings, however, quality practitioners often need to consider a skewness distribution. To address this situation, we developed an enhanced design method to utilize advantages of the traditional attribute control chart and to overcome its associated shortcomings. The proposed design method minimizes bias, i.e., an average time to signal for the shift of process from the target value (ATS) curve, as well as it applies a variable sampling interval (VSI) method to an attribute control chart for detecting a process shift efficiently. The results of the factorial experiment obtained by various parameter circumstances show that the VSI c control chart using nearly unbiased ATS design provides the smallest decreasing rate in ATS among other charts for all experimental cases.
5,400원
19.
2007.04
구독 인증기관 무료, 개인회원 유료
Concept about health is rapidly changed into 21C. thinking logic of customer about food is changed from just food to safety food by disposition of consumption about foodsafety. But government, manufacturer, distribution trader and seller which have different recognitions about foodsafety lose trust of customer. Because they did't focus on thinking changed of customer about foodsafety. Our thinking about rapidly changed food safety being intergrated with IT technology is helping to expand and supply into market. In this article, We'll study Traceability System about cattle and pig related to food. this system was developed in livestock market. In this study, we problems from these systems after studying present construction positions of these systems and purpose of this study is investigation of actual use condition. Also purpose of this study abstracts problems which will be developed and researched.
6,000원
