The purpose of this study is to experimentally analyze the seismic performance of beam-column specimens with vertical irregular, which were reinforced with RHS (Replaceable steel haunch system). a steel haunch system. To evaluate the seismic performance of the RHS, three specimens were manufactured and subjected to cycle loading tests. Retrofitted specimens have different beam-upper column stiffness ratio as a variable. The stiffness ratio of beam-upper column were considered to be 1.2 and 0.84. As a result of the test, the specimen reinforced with RHS showed improved maximum load and effective stiffness, and energy dissipation capacity compared to the non-retrofitted specimen with same beam-upper column stiffness ratio. The specimen with 0.84 beam-upper column stiffness ratio showed improved performance than the specimen with 12.

This study aims to assess the seismic performance of retrofitted reinforced concrete columns using a Replaceable Steel Brace (RSB) system, subjected to combined axial, lateral, and torsional loadings. Through experimental testing, one non-retrofitted concrete column specimen and two retrofitted specimens with variable sliding slot lengths were subjected to eccentric lateral loads to simulate realistic seismic loading. The retrofitted specimens with RSBs exhibited enhanced resistance against shear cracking, effective torsional resistance, and demonstrated the feasibility of easy replacement. The RSB system substantially improved seismic performance, achieving approximately 1.7 times higher load capacity and 3.5 times greater energy dissipation compared to non-retrofitted column, thus validating its efficacy under combined loading conditions.

The purpose of this study is to experimentally analyze the seismic performance of column with RSB (Replaceable Steel Brace), a steel brace system with slot length as a variable. To evaluate the seismic performance of the RSB, three specimens were manufactured and subjected to cyclic loading tests. The length of the sliding slots were considered to be 5 mm and 10mm to enable the brace to resist the load from the initiation of flexural crack and shear crack. As a result of the test, the specimen reinforced with the RSB showed improved maximun load and effective stiffness, and energy dissipation capacity compared to the non-reinforced specimens. The specimens with 5mm sliding slot showed little difference in test result compared to the specimen with a 10mm sliding slot, indicating that the length of sliding slot has little influence on the effectiveness of RSB.

본 연구에서는 국내에서 유통되는 식·약공용농산물의 잔 류농약 실태를 조사하기 위해 7품목 72건 대상으로 잔류 농약을 분석했다. 시료는 QuEChERS법으로 전처리한 후 GC-MS/MS, LC-MS/MS를 이용하여 분석했다. 식·약공용 농산물 총 7품목 72건 중 42건(58.3%)에서 잔류농약이 검 출되었으며, 검출된 농산물은 복분자 1건, 구기자 14건, 대 추 9건, 오미자 10건, 모과 1건, 생강 5건, 영지버섯 2건 이었다. 그 중 구기자 2건(11.8%), 오미자 1건(7.1%), 영 지버섯 2건(100%)에서 잔류농약 허용기준을 초과하여 검 출되었다. 검출농약은 43종으로 살균제 20종 75회, 살충제 23종 58회이었으며, 살균제 carbendazim 및 tebuconazole이 각각 11회로 가장 빈번하게 검출되었다. 허용기준을 초과 하여 검출된 농약은 acetamiprid, cadusafos, chlorpyrifos, flubendiamide, fluopyram, triazophos으로 모두 잔류농약허 용기준이 설정되지 않은 PLS 항목이었다. 결론적으로 잔 류농약 검사 건수, 검출률, 검출빈도를 종합적으로 고려해 볼 때 식·약공용농산물에 대한 지속적인 잔류농약 관리가 필요한 것으로 생각된다.

This study aimed to investigate pesticide residues in 160 stalk and stem vegetables marketed in Northern Gyeonggi-do. The QuEChERS method using GC-MS/MS and LC-MS/MS was employed to analyze the residues of 341 pesticides in the samples. The maximum or lower than the residue limit was recorded in 75 samples (46.9%), while 4 samples (2.5%) exceeded the maximum residue limit (MRL). Thirty-nine kinds of residual pesticides were detected including fungicides (14), insecticides (22), herbicides (2), and plant growth regulator (1). Carbendazim and pendimethalin were the most frequelntly detected pesticides. Fenitrothion, procymidone, and diazinon exceeded MRL in garlic chives, and Welsh onion. This indicated that these vegetables along with water celery should be constantly monitored.

본 연구는 2019년 1월 1일부터 전체 농산물에 확대 적용된 농약 허용물질목록관리제도(PLS)가 미치는 영향을 확인하기 위해 2018년부터 2020년까지 경기도 유통 농산물 검사 자료 28,693건을 대상으로 잔류농약 실태를 조사하였다. 전체 검사 실적 대비 기준 초과 비율은 2018년 1.0%, 2019년 1.2%, 2020년 1.2%로 나타났고, 잔류농약 검출 비율은 2018년 12.9%, 2019년 25.1%, 2020년 37.3% 로 증가하였다. 2019년 기준초과 114건 중 55건이 일률기준(0.01 mg/kg) 적용이었고, 2020년 기준초과 115건 중 66 건이 일률기준 적용이었다. 이를 개선하기 위해서는 비의 도적 오염, 미등록 작물에 관행적 사용, 부정 농약에 대한 관리가 필요해 보인다. Fluquinconazole은 비의도적 오염이 원인이었고, diazinon, chlorothalonil, methabenzthiazuron은 미등록 작물에 관행적 사용이 원인이었다. Chinomethionat 은 과거에 폐기된 농약 성분으로 밀수 농약 사용이 원인이었다. 본 연구 결과와 이후 모니터링 자료는 앞으로 제도 보완 및 현장 관리 강화를 위한 기초자료로 활용될 수 있을 것이다.

루이보스티에서 5종의 phenolic acid (gallic acid, chlorogenic acid, caffeic acid, p-coumaric acid, trans-ferulic acid) 와 9종의 flavonoid (procyanidin b1, aspalathin, rutin, vitexin, hyperoside, isoquercitrin, luteolin, quercetin, chrysoeriol)를 UPLC-MSMS를 이용하여 동시 분석하였다. 14종 페놀릭 류를 동시 분석하기 위하여 기기조건과 유효성을 검증하였고 확립된 분석방법을 이용하여 시중에 유통중인 루이보스티 30건을 채취하여 페놀릭류를 분석하였다. 루이보스티 1 g 혹은 1티백에 뜨거운 물 100 mL을 가하여 3분, 6분, 30분이 경과 후 그리고 차가운 물 (25-30oC)에 30분 우려낸 루이보스티의 페놀릭류 함량을 구하였다. 루이보스티에서 전체 실험대상 페놀릭류 중 rutin과 aspalathin이 가장 많이 추출되어 나왔으며 각각 물질의 함량은 제품별로 달랐다. 페놀릭류 성분의 추출효율은 14종 페놀릭류의 총 합 기준으로 뜨거운 물 30분 > 6분 > 3분 > 차가운 물 30분 순으로 높았다.

Quality changes of dried sea cucumber (Stichopusjaponicus) after applying a cyclic rehydration and retorting process were investigated during 4 weeks of storage. The length, volume, and weight of dried sea cucumber increased significantly as the number of rehydration cycles increased. Sea cucumber (SC) was bottled in the glass jar and a retort thermal process (121.1oC, 0.15 MPa) was applied. The total thermal processing time (TTT) was 24 min based on the temperature at the cold point. The size and texture of retorted SC were significantly changed until the first week of storage. However, regardless of the number of rehydration cycles, the size and texture of samples at different rehydration cycles showed no significant difference during the whole storage. The length, volume, weight, rehydration ratio (RR), hardness, and chewiness at the maximum degree of swelling during rehydration of dried SC were estimated as 100.86 mm, 38.62 mL, 41.05 g, 6.39 of RR, 249.19 gf, and 4.05 mJ, respectively.

Quality changes of carrots thermally processed in a large size (5 kg) retort pouch during 52 weeks of storage were investigated under different packaging methods and package shapes. To improve the efficiency of thermal processing (121.1oC, 0.15 MPa), the carrot (i.e., solid) and the broth (i.e., liquid) of the carrot soup were separately packed and sterilized. The quality changes of carrot packed without liquid were compared with those with liquid. Two different package shapes such as rectangular parallelepiped and cube were also evaluated to figure out the efficiency of the heat penetration rate for a large-sized pouch. The TTT (F0-values = 6) were 27, 54, and 114 min from the rectangular parallelepiped, cube, and solid/liquid mixed groups, respectively. In the mixed groups, the hardness and chewiness of solids (carrot) were significantly smaller than those measured in the other groups as TTT increased. Carrots treated in the rectangular parallelepiped shape showed a significantly higher texture than the cube shape. The CV of hardness and chewiness in the rectangular parallelepiped and the cube shape were calculated as 7.56 and 47.19, and 29.16 and 65.28, respectively. This demonstrated that a more uniform quality can be obtained from the rectangular parallelepiped shape.

Quality changes of carrots thermally processed in a large size (5 kg) retort pouch during 52 weeks of storage period were investigated upon different packaging methods and package shapes. To improve the efficiency of thermal processing (121.1°C, 0.15 MPa), the carrot (i.e., solid) and the broth (i.e., liquid) of carrot soup were separately packed and sterilized. The quality changes of carrot packed without liquid were compared with those with liquid. Two different package shapes such as rectangular parallelepiped and cube were also evaluate to figure out the efficiency of the heat penetration rate for the large size of pouch. The location of cold points and the total thermal processing time (TTT) were different upon the treatment. Fo-values, satisfying the TTT to at least 6 min, were 27, 54, and 114 min from the rectangular parallelepiped, cube and solid/liquid mixed group, respectively. In the mixed groups, the hardness and chewiness of solids (carrot) was significantly smaller than that measured in the other groups as TTT increased. Carrots treated in the rectangular parallelepiped shape showed a significantly higher texture than the cube shape for both immediately after the thermal treatment and during the storage period. Coefficient of variation (CV), which indicates the quality variation within the same treatment, of texture properties obtained from the outside and the center of the sample were compared to evaluate the quality variation within the same treatment. The CV of hardness and chewiness of the rectangular parallelepiped and the cube shape were calculated 7.56 and 47.19, and 29.16 and 65.28, respectively. This demonstrated that more uniform quality could be expected from the thermal treatment in the rectangular parallelepiped shape

Epidemic model for the serious game for prevention of infectious disease was developed based on SI(susceptible-infectious) model and social network model. Epidemic spread has been understood as phenomenon of not only medical care but also preventive administration. Thus, prediction and isolation of infectious population based on social and mathematical information is the key to decreases damage to communities. Built on analysis of two model, developed game model considered indivisual vulneraasbility and the depth of social relationships between nodes. Users of this game are expected to learn how to predict the diffusion of disease with practicing computation by playing game, and realize the importance of preventive effort to restrict social outbreak caused by fatal and acute viruses.

In risk assessment, there are several methods such as Safety Review, Checklist, FMEA(Failure Mode and Effect Analysis), FTA(Fault Tree Analysis), ETA (Event Tree Analysis) etc, however, the level of accident is indentified by the probability of accident and severity resulting from accident which used widely in assessing accidents and disasters. In this paper, the risk assessment method to decide the level of risk will be introduced by using severity, frequency and detection according to accident theory.

Safety check-up and individual education, safety status wishes to present included safety assessment table for safety management assessment system construction about unit work process in Study. Safety management assessment table gives each grades about worker of unit work process, safety check-up, education, management and identifies merits and demerits of unit work process, it is that propose safety management assessment system that can reduce accident occurrence possibility.

We achieved a Quantitative economic growth through rapid developed in 1970' and 1980'. It was confronted after IMF crisis that we needed to improve the past economic policy and the industrial structure. In line of that, the problem of the industrial structure like huge accidents of 1990' converted the recognition of safety. And to improve the conversion, the research of a safety management was needed. In this paper, we thought 4M1E(Man, Machine, Method, Material, Environment) as the cause of accident using the principal of process, assuming that output is accident. Applying 4M1E to the structure of QFD(Quality Function Deployment), we propose the safety function deployment, which has the flow line as followed; demand safety, safety characteristic, direct cause, 4M1E and safety management.

The modem industrial society is developing while growing more diverse and gigantic. Accordingly, occupational injuries or accidents can be caused in various situations, not just in the limited range of workplaces but also in the surroundings, and interest has increased in the prevention of occupational accidents with respect to occupational health and safety, and environment. Thus, this thesis will consider 4MlE (Man, Machine, Method, Material, Environment) as the fundamental causes of accidents and introduce a model of system in which the output of the process control system is replaced by accidents with its input by 4M1E. Furthermore, it will demonstrate how occupational hazardousness can be measured, whereby it can also be rated, by examining the relationship between 4M1E and types of accident in terms of the categories of severity, frequency, and detectability, based on the application of the model to the framework of FMEA.

It is important for radish to have late flowering characteristics especially in the case of spring and winter cultivars. To understand late flowering characteristics of radish at the molecular level the flowering time genes of two radish lines (NH-JS1 and NH-JS2) with different flowering time were compared by re-sequencing their genomes. There were a total of 872,587 SNPs and 194,637 INDELs between the two lines. The SNP density of each chromosome was relatively uniform throughout, but the region with low SNP density was found at the end of R3 and the middle of R9. To compare the flowering time genes of the two lines, we first looked for the flowering time genes in radish using Arabidopsis thaliana flowering time genes. As a result, homologs of radish were found for most flowering time genes, but FRIGIDA was not found. Among 224 radish flowering time gene-homologs found, 97 genes showed more than one sequence difference (SNP or INDEL) between the two lines, and 127 genes had no difference. In particular, no sequence differences were found in FT, CO, and FLC, core flowering time control genes. Rs350520 (FVE), Rs193800 (CURLY LEAF) and Rs255320 (ATX1) with more than 100 sequence variations were expected to have a significant effect on flowering time difference between the two lines. These results will be of great help in understanding the flowering timing difference between the two lines at the molecular level.