간행물

대한안전경영과학회지 KCI 등재 Journal of Korea Safety Management & Science

권호리스트/논문검색
이 간행물 논문 검색

권호

제19권 제3호 (2017년 9월) 18

1.
2017.09 구독 인증기관 무료, 개인회원 유료
In the industrial field, various type of fuel have been used for product processing facilities. Recent for 10 years, the usage of natural gas (NG) was gradually increased. Because it has many merits; clean fuel, no transportation, storage facility and so on. There are common safety concept that strict explosion protection approaches are needed for facilities where explosive materials such as flammable liquid, vapor and gases exist. But some has an optimistic point of view that the lighter than air gases such as NG disperse rapidly, hence do not form explosion environment upon release into the atmosphere, many parts has a conventional safety point of view that those gases are also inflammable gases, hence can form explosion environment although the extent is limited and present. In this paper, the heating equipments (Hot Oil Heater) was reviewed and some risk management measures were proposed. These measures include hazardous area classification and explosion-proof provisions of electric apparatus, an early gas leak detection and isolation, ventilation system reliability, emergency response plan and training and so on. This study calculates Hazardous Area Classification using the hypothetical volume in the KS C IEC code.
4,000원
2.
2017.09 구독 인증기관 무료, 개인회원 유료
The study seeks to cooperate with the investigation of a fire investigation based on public-private partnership. Fire protection systems provide a wide variety of viewpoints from the perspectives of design, construction, management, maintenance, maintenance and maintenance systems at a particular point in time, construction, management, and maintenance systems. What is controversial is that there are illegal activities such as illegal activities of the Patent Office, misconduct of construction work and unreasonable construction of construction works.As a theoretical framework, the present study identified the four key elements of a successful disaster response system : responsiveness, control, professionalism, and bias.
4,000원
3.
2017.09 구독 인증기관 무료, 개인회원 유료
To minimize and prevent the increasing fire and personal injury, the domestic firefighting organizations are making continuous efforts to strengthen the response system and safety standards. "Fire Reduction Program" has been prepared to reduce the outbreak of fire up to 20% in the next 10 years, and the analysis of fire sources should be done and its countermeasures also should be done accordingly. Therefore, the management status, the improvement tasks, and the limitations of the implementation plan are reviewed and studied so that the implementation and goal of the "Fire Reduction Policy" can be achieved
4,000원
4.
2017.09 구독 인증기관 무료, 개인회원 유료
Electrical product safety certification is for public safety. Korea electrical safety certification (KC) is being tested and certified on the base of Korean electrical appliance safety act and KC scheme. There are operating system and Electrical safety standards in the KC scheme. KC' operating system was adapted from japan operating system of Japan certification scheme. But KC certification' electrical safety standard was adapted from IEC standards of IECEE CB scheme. So There are many problems such as difference of version between KC standards and IEC standards, discrepancy between operating system and standards. Therefore, This paper analyzed the reason of discrepancy and proposed the improved KC certification operating system in order to reduce cost and to save time in the procedure of issuing KC approval for public safety in using electrical products and also for global competence.
4,000원
5.
2017.09 구독 인증기관 무료, 개인회원 유료
Process Hazard Analysis(PHA) have been performed for a risk management of process (petrochemical) industry for nearly 50 years. There are many PHA methods for application in the process industry, Hazop Study method has been recognized as a good method used typically in most of phase of process plant. And also there was inconvenient opinion that Hazop Study is too resource (man power, time etc.) consuming comparing its result performance (a quality of recommendations) for a good operating and existing plant. In this study, two types of PHA method - checklist and K-PSR - were performed respectively for a new para-xylene(PX)plant and 30 year old PX plant. Past history and experience of incident, operation, maintenance and so on are very important in PHA by those two methods. The higher effectiveness were realized in PHA by a checklist and K-PSR Method than prior Hazop study. And also some suggestions including PHA cycle determination, RBPS application, Follow-up plan of PHA result etc. were proposed about PHA improvement measures for a best risk management.
4,000원
6.
2017.09 구독 인증기관 무료, 개인회원 유료
The first tram in korea was commended the operation from 1899 to 1968 as a core role of public transportation. However, tram recently is being recognized as an alternative against a traffic congestion, a super-aged society and an environmental pollution problem. Because of these advantages, we are trying to introduce tram in korea. The efforts to introduce trams have focused on the economic analysis for tram construction. But we must be interested in tram operational safety. Early opening tram accidents could affect a negative impact on the additional tram introduction. We are trying to introduce trams in Daejeon, Wi-Rye and Su-won. In this paper, I want to check the safety issues in tram operation phase.
4,000원
7.
2017.09 구독 인증기관 무료, 개인회원 유료
This paper suggests a specific model that could efficiently improve the interaction and the interface between MES(Manufacturing Execution System) server and POP(Point of Production) terminal through electronic document server and electronic pen, bluetooth receiver and form paper in disassembly and process inspection works. The proposed model shows that the new method by electronic document automation system can more efficiently perform to reduce processing time for maintenance work, compared with the current approach by handwritten processing system. It is noted in case of the method by electronic document automation system that the effects of proposed model are as follows; (a) While the processing time per equipment for maintenance by the current method was 300 minutes, the processing time by the new method was 50 minutes. (b) While the processing error ratio by the current method was 20%, the error ratio by the new method was 1%.
4,000원
8.
2017.09 구독 인증기관 무료, 개인회원 유료
The purpose of this study is to review the relationship between emotional labor and job burnout, and the moderating effects of peer and superior support in social welfare agency. In order to verify and achieve the purposes mentioned above, questionnaire data were gathered and analysed from 349 employees of social welfare agency in western Kangwon-do province. Empirical survey's findings are as follows; First, deep action(DA) appeared to be negatively related with depersonalization and reduced accomplishment. Second, surface action(SA) appeared to be positively related with all job burnout factors(emotional exhaustion, depersonalization and reduced accomplishment). Third, peer support moderated negatively the relationship between emotional labor(DA, SA) and emotional exhaustion. Fourth, superior support moderated negatively the relationship between deep action(DA) and emotional exhaustion.
4,300원
9.
2017.09 구독 인증기관 무료, 개인회원 유료
The purpose of this study was to identify the observable symptoms of musculoskeletal disease from electronic components manufacturing workers who involved in many repetitive tasks and to provide the basic data for the prevention and management. The survey was conducted on 721 people from 15 April, 2013 to 17 May, 2013 by selfrecording type. The results of the study are as follows. First, symptom complaints based on different body parts are in following order, waist was 12.9%, shoulder was 10.5%, neck was 7.4%, hand/wrist/finger was 7.4%, leg/foot was 4.4%, arm/elbow was 2.8%, and 21.9% of the respondents showed symptoms in more than one body part. Sex, age, marital status, work experience, work intensity, and past accident experience were statistically significant. Second, in the job stress evaluation, all male and female workers were below the median of Korean workers in all of 8 categories. the higher the scores for lack of job autonomy, the higher the symptom complaints of musculoskeletal disease. In the case of patients complain observable symptoms of musculorskeletal disease, they should receive proper outpatient treatment, various programs such as stretching by body parts, setting up a desirable working posture, switching to cyclical work, should b developed as much as possible.
4,000원
10.
2017.09 구독 인증기관 무료, 개인회원 유료
Performance evaluation has been done using financial indices which are generally regarded as inappropriate for the organizations which are innovative and progressive. Thus, the Balanced Scorecard(BSC) was developed considering long term performance and invisible performance. This BSC has four perspectives of finance, customer, internal operation, and learning. Based on the BSC, a new BSC has been derived with a fifth view of environmental and social perspective, which is now called as a Sustainability BSC. In this study, we evaluated Green IT initiatives using the Sustainability BSC. The initiatives are categorized as RFID, telepresence, paperless office, logistics management etc. The initiatives were evaluated from the view of five perspectives, resulting in high cor relationships among finance, internal operation, and environmental and social perspectives. Namely, good initiatives from the view of environmental/social perspective are also evaluated as good from the view of finance and internal operation perspectives. In this study, we recommend organizations to introduce Green IT initiatives by showing how Green IT initiatives have contributed to the organizations.
4,000원
11.
2017.09 구독 인증기관 무료, 개인회원 유료
This paper presents another maintenance policy for a group of units under finite operating horizon. A group of identical units are subject to random failures. Group maintenances are performed to all units together at specified intervals, and the failed units during operation are remained idle until the next group maintenance set-up. Unlike the traditional assumption of infinite operating horizon, we adopt the assumption of the finite operating horizon which reflect the rapid industrial advance and short life cycle of modern times. The units are under operation until the end of the operating horizon. Further, the operation of units are extended to the first group maintenance time after the end of the horizon. The total cost under the proposed maintenance policy is derived. The optimal group maintenance interval and the expected number of group maintenances during the horizon are found. It is shown that the proposed policy is better than the classical group maintenance policy in terms of total cost over the operating horizon. Numerical examples are presented for illustrations.
4,000원
12.
2017.09 구독 인증기관 무료, 개인회원 유료
This research studies on the demand forecasting for service parts considering parts life cycle, that gets relatively less attentions in the field of forecasting. Our goal is to develop forecasting method robust across many situations, not necessarily optimal for a limited number of specific situations. For this purpose, we first extensively analyze the drawbacks of the existing forecasting methods, then we propose the new demand forecasting method by using these findings and reinforcement leaning technique. Using simulation experiments, we proved that the proposed forecasting method is better than the existing methods under various experimental environments.
4,200원
13.
2017.09 구독 인증기관 무료, 개인회원 유료
In order to increase the productivity of the logistics center and transportation, we try to articulate the priority ranking factors of the productivity influenced by the personality of the field workers (logistics center workers) and functional workers (drivers) via the AHP technique Individual personality was studied by applying the Big 5 model of psychological factors (openness, Conscientiousness, extroversion, Agreeableness, neuroticism). In this paper, extraversion was critically analyzed as a priority factor. A trait of extroversion is a strongly active and individual personality. In this study, the field workers are logistics center workers and the functional workers are drivers. They are interactively influenced in the In & Out operation. For example, when it comes to ‘up and down work’ and ‘inspection work’, the functional workers perform ‘up and down work’ and ‘delivery work’ and the field workers perform ‘inspection work’. Stressing on the respective work has an affect on work productivity. Inspection workforce has something to do with inventory management. Functional workforce affects the delivery workforce. Delivery work is positively correlated with customer satisfaction. Nevertheless, as a result of research, extrovert personality that has something to do with an energetic activity would not affect on the implementation of their operation. In addition, personal extraversion of workers and drivers in the warehouse can have a significant impact on job commitment and productivity improvement.
4,000원
14.
2017.09 구독 인증기관 무료, 개인회원 유료
Companies are reluctant to disclose information because of trade secret and corporate identity For the same reasons, logistics companies do not want to operate in the form of a community In urban areas, the loading of vehicles is 100% as the quantity of goods transported is too much. In mountain areas, however, the load condition of the vehicle is not 100% because of the low quantity of goods transported Therefore, the transportation costs will increase as the cost of transport increase, the competitiveness of firms will also decline In this paper, we studied a simulation to measure driving time and volume of cargo according to the change of the quantity of goods transported in the mountain area According to the research results, we got a conclusion that the proposed method makes the operation time be less and the volume of cargo increase compared with the existing operation method
4,000원
15.
2017.09 구독 인증기관 무료, 개인회원 유료
Logistics companies distinguish between medium-sized business and small business according to the size of enterprises. Of course, conglomerates are called global corporations. In this study, mid-sized companies over a certain size or more and those below are classified and decide the priorities among important factors to secure competitiveness in logistics companies are determined through AHP technique. Mid-sized companies are companies that can provide more than two logistics services. For example, they provide warehousing and transportation services in the same time. small companies are companies that can mostly provide one functional service. Warehousing, transportation, manpower, and information are listed as factors in this study. As a result of the study, medium-sized companies emphasized on the importance of transportation. When it comes to small companies, warehousing was emphasized as an important factor. Due to the simultaneous and contemporary service of warehousing and transportation in small-sized company, the reliable image of the company will be underestimated in case of delays in transportation. Competitiveness will also be weakened. Global corporations or conglomerates will start to consider relocating warehousing areas to others except for the central storage hub. They won’t plan to invest directly, either. Therefore, it will be possible to secure competitiveness by providing the function of warehousing and to signed easily partnership
4,000원
16.
2017.09 구독 인증기관 무료, 개인회원 유료
The respective delivering vehicle loaded with the own cargo moves into the respective delivery area. At the base, the delivery points D1 and D2 ,for example, have the same starting point but the destination is different. The average delivering time of the delivery vehicle is mostly more than 8 hours a day. Therefore, the efficiency of delivery is generally low. In this study, the deliveries will be forwarded from a base station to a delivery point where cross docking will be applied to a single vehicle, and will be distributed from the cross docking point through cross docking. If the distribution is implemented, one vehicle will not have to be operated from the base to the cross docking point. In that case, logistics cost will be reasonably saved by the reduction of transportation cost and labor time. If one vehicle only runs from the base to the cross docking point, each vehicle will be operated in two shifts, and the vehicle operation can be efficiently implemented. This research model is based on the assumption that the 3 types of ratios between the traffic volume of the vehicles starting at the base and the vehicles waiting at the cross docking point are set to the first ratio of 30% to 70%, the second ratio of 50% to 50% and the final ratio of 70% to 30%. As a result of the study, The delivery time€in the cross docking point is much higher than that in present on the condition that the cargo volume in the D2 area is more than 50%. Likewise, the delivery time is slightly higher€on the condition that€the cargo volume€is less than 50%. Time is reduced in terms of 50% model like AS-IS model.
4,000원
17.
2017.09 구독 인증기관 무료, 개인회원 유료
Logistic enterprises want to be competitive enterprises in fierce logistic market and worry about the securement of discriminative competitiveness for it. The standards for the judgement of logistic industry’s maintenance of competitiveness are not only economic feasibility of logistic costs but also the satisfaction of users because well-established service system for variety and enhancement of logistic needs. Some of the quality attributes sufficiently satisfy expectation of customers, but not guarantee high-quality satisfaction. Therefore, it’s difficult to grasp quality attributes with the existing approach of perceived service quality. Quality attribute model suggested by Kano is widely used as the concept is accurate, there is high possibility to be used at the stage of product/service planning, and it can be easily applied. Kano model has a limitation that quality attributes are classified with mode and the differences between strong property of the quality attribute and week property in quality attributes were ignored. Therefore, Timko calculated customer satisfaction coefficient with the result of Kano’s survey and effects of customer satisfaction and unsatisfaction through relations between satisfaction coefficient and unsatisfaction coefficient. The purposes of this study are to use ASC, the average of satisfaction coefficient and unsatisfaction, as the satisfaction of quality characteristics, decide the importance of quality characteristics with TOPSIS, a representative multi-standard decision-making method, and calculate strategy improvement propriety of logistic service quality.
4,600원
18.
2017.09 구독 인증기관 무료, 개인회원 유료
This study is an empirical study on the relationships among success factors of six sigma(support of top management, education and training, performance-based reward, customer and quality focused thought) on change management activity and business performance. In particular, mediating effect of change management activity on the relationship between success factors of six sigma and business performance is empirically analysed to find causes and impacts among these variables. The study results are as follows: First, there were positive relationships between critical success factors of six sigma(except support of top management) and change management activity. Second, there was also a positive relationship between change management activity and business performance. Third, there were also positive relationships between critical success factors of six sigma and business performance. Finally, change management activity was partial mediating effects on the relationship between critical success factors of six sigma(education and training, performance-based reward, customer and quality focused thought) and business performance. On the other hand, support of top management had no mediating effect on business performance.
4,600원