검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 37

        1.
        2021.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        도로협곡에서의 수목식재에 따른 보도 내 교통유발 대기오염도 변화를 살펴보기 위해 오픈소스 전산유체역학 코드 FDS(Fire Dynamics Simulator)를 사용하여 수목 투과지수, 식재 위치 및 유형에 따른 영향을 조사하였다. 광범위한 시뮬레이션을 통해 1) 관목층 만으로만 구성된 사례, 2) 관목층과 아교목층으로 구성된 사례 및 3) 관목층과 교목층으로 구성된 사례를 포함하는 400개의 시나리오 사례 중 399개 사례에 대해 유효한 데이터를 생성하였다. 분석결과, 보도 위에서 관찰되는 평균화된 정상상태 대기오염 농도는 식재유 형과는 무관하게 수목식재 후 약 10% 이상 감소하는 것으로 나타났다. 가장 큰 대기오염 감소효과는 관목층만으로 구성된 사례에서 관찰되었는데 대략 45%까지 감소하는 것으로 나타났다. 이러한 감소효과는 차선에서 인도로 대기오염물질을 직접 수송하는 선회류가 관목층에 의해 유리한 방향으로 변형되는 물리적 과정에 기초한다.
        4,000원
        2.
        2021.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Nuclear power plants in Korea were designed and evaluated based on the NRC's Regulatory Guide 1.60, a design response spectrum for nuclear power plants. However, it can be seen that the seismic motion characteristics are different when analyzing the Gyeongju earthquake and the Pohang earthquake that has recently occurred in Korea. Compared to the design response spectrum, seismic motion characteristics in Korea have a larger spectral acceleration in the high-frequency region. Therefore, in the case of equipment with a high natural frequency installed in a nuclear power plant, seismic performance may be reduced by reflecting the characteristics of domestic seismic motions. The failure modes of the equipment are typically structural failure and functional failure, with an anchorage failure being a representative type of structural failure. In this study, comparative analyses were performed to decide whether to consider the inelastic behavior of the anchorage or not. As a result, it was confirmed that the seismic performance of the anchorages could be increased by considering the inelastic behavior of an anchorage.
        4,000원
        5.
        2017.12 KCI 등재 구독 인증기관·개인회원 무료
        The purposes of this study are to analyze risks of construction step BIM(Building Information Modeling) applied project and improve it. Recently, construction industry has emphasized an importance of BIM for efficient utilization of various information. In the whole life cycle of huge construction project, there are cases introducing BIM and projects applying BIM are gradually increased to the work of construction step. However, the process of communication is not established, so the contents of BIM process of construction step are just showing rough fields and concepts of working utilization, so it's restrictive to utilize BIM actively on constructions step. Through results of case study in this research, constructor risks of BIM business should be efficiently treated with Fuzzy-FMEA that is more precise than existing danger evaluation.
        6.
        2017.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Factors affecting spatial distribution of halophytes were analyzed in June 2012 at the Goraebul coastal dunes. In the Goraebul sand dune, distribution of halophytes was divided into three groups. The first group belonging to Elymus mollis, Carex kobomugi, Calystegia soldanella, Ixeris repens and Glehnia littoralis was distributed in the ridge of primary sand dune and dune slack. The second group belonging to Lathyrus japonicus and Zoysia macrostachya was distributed in the dune slack. The third group belonging to Pinus thunbergii, Vitex rotundifolia and Linaria japonicus was distributed in the pine forest of the secondary sand dune. E. mollis, C. kobomugi, C. soldanella, I. repens and G. littoralis was distributed in relatively unstable habitat of sand dunes due to the large amount of sand movement. V. rotundifolia was distributed in a relatively stable habitat. Factors that have the greatest influence on distribution of halophytes in the Goraebul sand dunes are distance from the seashore, topography, and the pine forest. The Goraebul sand dune is a relatively well-preserved area with minimal human intervention. Therefore, different distribution of physico-chemical factors by natural processes is essential to spatial distribution of halophytes than other sand dunes in Korea. Significant natural processes in the Goraebul sand dunes were advance and retreat of coastlines from waves, erosion and sedimentation of sand due to wind and waves, and dispersal of seawater.
        4,000원
        7.
        2017.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Logistic enterprises want to be competitive enterprises in fierce logistic market and worry about the securement of discriminative competitiveness for it. The standards for the judgement of logistic industry’s maintenance of competitiveness are not only economic feasibility of logistic costs but also the satisfaction of users because well-established service system for variety and enhancement of logistic needs. Some of the quality attributes sufficiently satisfy expectation of customers, but not guarantee high-quality satisfaction. Therefore, it’s difficult to grasp quality attributes with the existing approach of perceived service quality. Quality attribute model suggested by Kano is widely used as the concept is accurate, there is high possibility to be used at the stage of product/service planning, and it can be easily applied. Kano model has a limitation that quality attributes are classified with mode and the differences between strong property of the quality attribute and week property in quality attributes were ignored. Therefore, Timko calculated customer satisfaction coefficient with the result of Kano’s survey and effects of customer satisfaction and unsatisfaction through relations between satisfaction coefficient and unsatisfaction coefficient. The purposes of this study are to use ASC, the average of satisfaction coefficient and unsatisfaction, as the satisfaction of quality characteristics, decide the importance of quality characteristics with TOPSIS, a representative multi-standard decision-making method, and calculate strategy improvement propriety of logistic service quality.
        4,600원
        8.
        2016.10 구독 인증기관·개인회원 무료
        지렁이는 토양 내 유기물을 분해하고 토양의 물리성을 개선하는 등 농경지에 매우 유익한 생물자원이다. 본 조사에서는 과수원에서 재배방법에 따른 지렁이의 밀도를 비교하기 위해 제주특별자치도 표선면에 위치한 4개의 감귤과수원에서 지렁이를 채집하여 발생량을 조사하였다. 조사포장은 유기재배 감귤원내 헤어리베치 재배구, 크림손 클로버 재배구, 일반초생구와 인근 관행재배 감귤원 3곳을 선정하였으며, 조사는 2016년 6월 1일에 실시하였다. 조사방법은 조사구당 3반복으로 감귤나무 1.5m 지점에서 50×50cm 넓이 15cm 깊이로 흙을 채취하여, 그 안에 있는 지렁이를 계수하고 생체중을 측정하였다. 채집된 지렁이수는 유기과수원의 헤어리베치, 크림손클로버, 일반초생 재배구에서는 각각 43.3마리, 40.5마리, 23마리, 관행농가는 평균 14.7마리였다. 생체중은 헤어리베치, 크림손클로버, 일반초생 재배구에서는 44.8g, 47.2g, 32.8g, 관행에서는 10.9g이었다. 본 조사에서 지렁이는 유기과원에서, 특히 두과녹비작물 재배구에서 발생이 높은 것을 확인할 수 있었다.
        9.
        2016.04 구독 인증기관·개인회원 무료
        톱다리개미허리노린재는 유기 콩 재배지에서 콩 꼬투리를 가해하여 큰 피해를 주는 해충이다. 그러나 이들은 이동성이 크고 살충효과가 높은 유기농업자재가 부족하기 때문에 방제에 어려움을 겪고 있다. 또한 유기농가에서 고추 등 양념채소류 추출물을 자가제조하여 해충방제제로 활용하고 있으나 살충효과 및 유효 성분에 대한 과학적 평가가 이루어지지 않고 있다. 본 연구는 톱다리개미허리노린재에 대한 양념채소류 추출물의 방제제로서의 활용가능성을 평가하기 위하여 포장에서 기피활성을 조사하였다. 대상 양념채소류 추출물은 마늘, 생강, 파, 고추, 고추씨를 재료로 사용하였으며, 3L의 담금주(35% 알콜)에 1.6kg의 생체(마늘, 생강, 파) 및 건체(고추, 고추씨)를 침지하여 활성성분을 추출하였고, 2개월 보관 후 시험에 사용하였다. 전북 완주군 국립농업과학원 내 시험포장(2000㎡)에 대원콩 유묘를 50cm 간격으로 이랑 당 한 줄로 정식하였으며, 톱다리개미허리노린재 포장내 유입시기인 2015년 8월 26일부터 9월 24일까지 4회에 걸쳐 양념채소류 추출물을 살포하고 처리 1일 후에 처리별 주당 밀도를 조사하였다. 그 결과, 콩 포장에서 노린재류가 주로 유입되는 8월 27일에는 무처리에서 톱다리개미허리노린재의 밀도가 1.06마리/주로 높은 반면 고추추출물에서는 톱다리개미허리노린재가 발생하지 않았으며, 고추씨와 생강 대파추출물 살포처리구에서는 0.06마리/주로 낮게 발생하였다. 처리 별 콩 수확 후 톱다리개미허리노린재에 의한 콩 피해 립율을 조사한 결과 고추, 고추씨, 대파추출물에서 무처리 대비 낮게 조사되어 초기 톱다리개미허리노린재 밀도와 유사한 경향을 보였다. 본 연구를 통하여 고추 및 대파 추출물의 톱다리개미허리노린재 관리를 위한 농자재로서의 가능성이 있음을 확인할 수 있었다
        10.
        2016.04 구독 인증기관·개인회원 무료
        유기과수원은 풍부한 유기물이 존재하고 식생이 다양하며 화학농약을 사용하지 않아 생물상이 풍부한 특징을 가지고 있다. 본 시험에서는 국내 배, 사과 유기과수원에서 발생하는 저서성 절지동물을 채집하여 발생 분포를 조사하였다. 절지동물 의 채집은 사과(청송, 무주, 단양, 예천) 배(아산, 천안, 화성, 여주) 각각 4지역의 과수원에서 진행하였다. 또한 과수원내 생태적 보상공간의 효과를 알아보기 위해 청송, 예천 유기과수원내 10여 종의 초화류 식물을 이용한 초화류길을 조성하였으며, 이로인한 절지동물의 발생 차이를 일반예초구와 비교 조사하였다. 절지동물의 채집은 6월중순부터 10월초까지 핏폴트랩을 사용하여 이루어졌다. 에탄올, 글리세린, 증류수를 넣은 400ml 컵을 이용하여 핏폴트랩을 만들고 조사구마다 3개씩 설치하였 다. 조사가 이루어진 유기과수원의 절지동물을 분석한 결과, 잡식성 절지동물이 50.9%로 가장 높게 나타났고 기생성 24.6%, 부식성 23.5%, 포식성이 6.6%로 순으로 나타났다. 과수원내 초화류길을 조성한 구획에서는 무처리에 비해 22~28% 높은 개체수가 채집되어 생태적 관리에 따른 절지동물상의 변화를 확인할 수 있었다. 유기과수원의 식생을 적절히 관리한다면 과수원내 생물다양성을 높여 농업의 환경적 가치를 증대시킬 수 있을 것이다.
        11.
        2009.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        자연지형에 의한 기류 변화를 CFD 모델과 풍동실험을 통하여 비교 연구하였다. 해안에 인접한 남부 산악지 형을 대상으로 풍동실험과 몇 종류의 CFD 모델 시뮬레이션을 수행하였다. 사용한 CFD 모델은 2 가지로, 하나는 LES 난류모델을 사용하는 가상경계기법을 활용한 유한체적법(Finite Volume Method, FVM) 코드와또하나는 4 가지 RANS 난류모델이 선택사양으로 제공되는 상업용 CFD 모델이다. 지형에 의해 풍속이 증가되는 지점과 감소되는 지점에서 수 직풍속분포를 직접 비교하고 상관도를 구하였다. CFD 모델과 풍동실험과의 상관도(R)는 0.890~0.965로 매우 높게 나 타났으며, CFD 모델중 VBM LES CFD 모델은상관도 0.965로나타나풍동실험을가장잘모사하는것으로분석되었다.
        4,000원
        14.
        2019.10 서비스 종료(열람 제한)
        원전기기의 지진 안전성 평가를 위해서는 설치된 위치에서 발생가능한 지진하중을 고려하여 내진해석을 수행한다. 내진해석을 수행하기 위해서는 대상기기의 실제거동을 반영하는 해석모델을 구축하는 하는 것이 중요하다. 원전의 내진검증 기술 기준인 IEEE 344에서는 기기의 동적 특성을 결정하는데 도움을 주기 위해서 탐색시험을 수행할 것을 권고한다. 탐색시험의 종류는 기저 가진에 의한 방법과 임피던스 방법에 의한 방법을 제시하였다 본 연구는 원전의 한 대상기기를 선정하고 기술 기준에서 제시하는 공진탐색시험을 수행하고 그 결과에 대해 분석하고 현장 적용성 방법에 대해 검토하였다.
        15.
        2019.10 서비스 종료(열람 제한)
        지진 발생시 원자력 발전소의 안전성을 평가하기 위해 수행되는 확률론적 지진 안전성평가를 위해서는 원전의 기기별로 지진 수준에 따른 파괴확률로서 표현되는 지진취약도 평가가 필요하다. 지진취약도 평가를 위해서는 대상 기기의 설계정보와 함께 실제 설치 상태에 대한 현장조사 등을 통해 예상되는 파손모드를 결정이 필요하며 주요 변수에 대한 불확실성 및 임의성 등 변동성 요인을 반영하여 결정된다. 본 연구에서는 구조적 파손이 지배하는 경우에 대하여 각 변수별로 변동성 요인을 도출하고 분산도 반영에 따른 지진취약도 영향 요인을 분석하고자 한다.
        16.
        2019.04 서비스 종료(열람 제한)
        In this case study, seismic category I class electrical equipment in NPP was manufactured and a modal testing was performed using an impact hammer to measure the dynamic characteristics. In the case of electrical cabinets, various safety related components are mounted in the internal frame. Therefore, FEM model that appropriately reflects the local mode is required. To reflect both global and local mode to FEM model, modal testing should be carried out. For implementing the global mode, accelerometers were installed at twenty-eight points of the outline plate edge, and responses for local mode were measured at seven crucial points and compared those results.
        17.
        2019.04 서비스 종료(열람 제한)
        Most of equipment in nuclear power plants (NPPs) is anchored to the concrete structure or other components with concrete anchors. It is need to be considering the boundary condition by concrete-anchor connection. In this paper, the seismic analysis was conducted varying anchoring type as non-linear stiffness condition from preliminary analysis.
        18.
        2018.04 서비스 종료(열람 제한)
        Nuclear power plants in operation are composed of many electrical equipment, and various types of safety related components are installed in the electrical equipment. These internal components are repeatedly replaced due to aging and their performance improvements during the operation of nuclear power plants. Replacement of safety-related shall demonstrate that no malfunction occurs even under amplified seismic load at the level where the components are mounted on the electrical equipment. Therefore, it is necessary to derive the accurate seismic load from the level where the target components are mounted on electrical equipment through the equipment seismic analysis. To perform seismic analysis of electrical equipment, dynamic characteristics should be extracted through in-situ test and utilize to improve the electrical equipment seismic analysis model. In this study, in-situ test of typical NPP’s electrical equipment is performed to derive a natural frequency and mode shapes in the horizontal direction.
        19.
        2018.04 서비스 종료(열람 제한)
        Most of systems and components in nuclear power plants (NPPs) are anchored to the concrete structure and other components by means of post installed anchors. In order to develop more accurate seismic analysis model of equipment in NPPs, a deep consideration of concrete-anchor connection behavior is required. In this paper, the nonlinear finite element analysis was conducted for the concrete-anchor connection zone details. From the analysis results including strength and load-displacement relation was derived according to design variables including geometry and material properties.
        20.
        2017.06 KCI 등재 서비스 종료(열람 제한)
        본 연구는 황토유황을 활용하여 벼 키다리병 발병을 최소화할 수 있는 최적 종자소독조 건을 선발하기 위해 수행되었다. 키다리병에 이병된 ‘신동진’ 품종 벼 종자를 공시하였고 황토유황 농도, 침지온도, 시간, 온탕여부를 구분하여 실내 및 온실검정을 통해 침지시간은 48시간, 침지농도는 1%로 최적 소독조건을 선발하였다. 그리고 모판과 포장시험을 수행하 여 온탕처리 후 20℃, 1% 황토유황에 48시간 침지 처리구와 30℃, 1% 황토유황에 48시간 단독 침지할 때 가장 효과가 높았다는 것을 확인하였고 위 처리조건으로 소독한 종자가 육 묘, 이앙, 출수기를 거치면서도 100%의 높은 방제효과가 유지되는 것을 확인할 수 있었다. 그러나 20℃에서 1% 황토유황으로 침지한 처리구에서는 포장에서 78.2%의 낮은 방제가를 보였다. 또한, 온탕소독만 수행한 처리구에서도 60℃, 10분간 충실히 수행될 경우 효과적인 벼 키다리병 방제가 가능함을 보여주었지만 온탕처리 후 황토유황으로 추가 침지함으로서 많은 양의 종자를 소독할 때 좀 더 나은 키다리병 방제 효과를 가져다 줄 수 있을 것으로 판단된다. 이상의 결과를 종합하여 볼 때 농가에서 온탕소독기와 종자소독기 둘 중 한가지 만 구비하더라도 황토유황을 이용하여 충분한 소독효과를 낼 수 있기 때문에 현장에서 보 다 쉽게 활용될 수 있을 것으로 판단되며 제조방법이 쉽고 비용이 적게 드는 황토유황의 특성상 농가의 경영비 절감효과도 클 것으로 기대된다.
        1 2