간행물
대한안전경영과학회지 KCI 등재 Journal of Korea Safety Management & Science
- 발행기관 대한안전경영과학회
- 자료유형 학술지
- 간기 계간
- ISSN 1229-6783 (Print)2288-1484 (Online)
- 수록기간 1999 ~ 2024
- 주제분류 공학 > 안전공학 공학 분류의 다른 간행물
- 십진분류KDC 530DDC 620
권호리스트/논문검색
제4권 제1호 (2002년 3월) 12건
1.
2002.03
구독 인증기관 무료, 개인회원 유료
A supervisor's role is very important to have accident free environment in a company. In order to take full advantage of safety management system, company safety supervisors require to learn how much responsibility they have in their company. To improve safety supervisor's knowledge, they must spend time to learn the importance accident free environment. To improve the efficiency of safety management, the supervisors need to voluntarily emphasize the importance of safety management.
4,000원
2.
2002.03
구독 인증기관 무료, 개인회원 유료
Though the Honorary Industrial Safety Supervisor System was activated from 1995, the system did not show the better effectiveness due to the unconcern of top management and the insufficient support of government etc. The purpose of this study is to analyze the problems of the system and to present the improvement direction of that system. The research result points out that we have to consider the following countermeasures; First, the government should make up the support system by a law dealing with proper compensation and professional education for the supervisor, and tax reduction for companies. Second, the companies should make an effort firming up the safety consciousness of top management, and strengthening the employees' concern about safety through continuous safety education and campaign by a labor union, and promoting the supervisor's pride through recognition from top management and other employees.
4,800원
3.
2002.03
구독 인증기관 무료, 개인회원 유료
This paper describes "the remote automatic diagnosis and repair system which automatically reads the problems such as "out of order" occurred on equipment at customer's equipment from a remote computer center using HTTP(hyper text transfer protocol). It shows the scheme of the network configurations and features of the system. In addition, a way to implement the overall system, the specific functions of unit, and the operational specifications between the center's computer and customer's computer are also presented.also presented.
4,000원
4.
2002.03
구독 인증기관 무료, 개인회원 유료
Risk analysis is a formal deductive procedure for determining combinations of component failures and human errors that could result in the occurrence of specified undesired events at the system level. This method can be used to analyze the vast majority of industrial system reliability problems. This study deals with the application of knowledge-engineering and a methodology for the assessment ＆ measurement of reliability, availability, maintainability, and safety of industrial systems using FTA(fault tree analysis), A fuzzy methodology for fault-tree evaluation seems to be an alternative solution to overcome the drawbacks of the conventional approach (insufficient Information concerning the relative frequencies of hazard events). To improve the quality of results, the membership functions must be approximated based on heuristic considerations, The purpose of this study is to describe the knowledge engineering approach, directed to integrate the various sources of knowledge involved in a FTA.
4,200원
5.
2002.03
구독 인증기관 무료, 개인회원 유료
In this case study, results of the explosion accident at MEK-PO factory were analysed by using the consequence analysis of quantitative hazard assessment and the explosion energy, the burst pressure of vessel, and overpressures at the explosion center and at 300m distance from the explosion center were estimated, respectively. As a result, we found that a cause of accident was the runaway reaction of product(MEK-PO) because of the molecular expansion in vessel and that the possibility of the runaway reaction was classified the mechanical failure(the obstacle of refrigerator or the shutdown valve), design error, and operating error by lack of thermochemical knowledge. Also, the evasive action to prevent accident was suggested.
4,000원
6.
2002.03
구독 인증기관 무료, 개인회원 유료
As Internet spreads rapidly, the industrial structure is changing to a new paradigm. The previous EDI system was asked to change and WEB EDI, E-Mail EDI, FTP EDI etc. which are based on the internet appeared. These days the XML/EDI which has XML document appeared. The XML/EDI consider advantages and disadvantages of VAN/EDI and EDI which based on the internet. Also, EDI system has to assure a safe exchange between sender and receiver. But, the internet has security problems because it uses a open TCP/IP protocol. Although there are many methods for security, it is being studied with XML concept. On this paper, we will suppose the XML/EDI system model with XML Signature, and build a procedure of electronic signature and delivery of document between sender and receiver.
4,300원
7.
2002.03
구독 인증기관 무료, 개인회원 유료
최근 컴퓨터 기술의 발전과 함께 Mobile 컴퓨터 환경도 함께 급속히 발전하고 있다. 이로 인해 오프라인 컴퓨팅 및 네트워킹을 이용하던 사용자들이 Mobile 컴퓨팅 환경을 자주 이용하게 되고, Mobile 솔루션에 대한 사용자의 요구도 다양화되고 있는 추세이다. 이 중 Mobile 지도 서비스는 휴대하기 편한 Pocket PC라고도 불리는 PDA(Personal Digital Assistants)는 자신의 현재 위치를 확인할 수 있는 GPS(Glob
4,300원
8.
2002.03
구독 인증기관 무료, 개인회원 유료
The modern society is changed into mass production, complicated circulation society and mass consuming society because of the development of the fast science technology since the occurrence of the industrial revolution. Also, the human life style is changed into the abundant consumption society because of the appearance of the various products. The society change like the above provide comfortable life to us. but We are facing with danger for the bad food, illegal medicines and bad products. So, To solve the danger like the above, The Product Reliability Law be made. The both The enterprise and consumer need The Product Reliability Law to protect one's own interest. The consumer is claiming to use the product of safety of the resonable price and good quality in modern society, So, 1 studied on countermeasures of domestic enterprise to increase the competitive power of the enterprise according to Product Reliability Law
4,300원
9.
2002.03
구독 인증기관 무료, 개인회원 유료
The certification of software products can provide a greater level of acceptance and feeling of security to customers of these products. This paper presents a certification method for the quality of package software. First of all, the evaluation criteria are derived from ISO/IEC 9126 and 12119 standards, and then the evaluation module are designed considering the measurement scale type. The results can be applied to construct the certification scheme of software product quality for the commercial purpose.
4,200원
10.
2002.03
구독 인증기관 무료, 개인회원 유료
Nowadays, most companies seek after the greatest profit by means of offering the goods which consumers want timely and efficiently and minimizing the cost of inventory and distribution channel which amounts to the great portion of total cost. And according as EC(Electronic Commerce) market has increased rapidly, SCM(Supply Chain Management) for EC become one of the most important facts for companies, therefore this paper suggest SCM scheme which EC, especially B to C, is added to the existing commerce system. This paper uses internet for information integration of distribution channel which is away from one another and applies TOC(Theory of Constraint)'s DBR(Drum-Buffer-Rope) Scheduling for synchronization through the whole supply chain. It is possible to synchronize the whole supply chain by means of making the speed of manufacturing and distribution to be controlled by consumer's order which is received in distribution center, and inventory and loss of sales opportunities are minimized by constant. Buffer Management. If inventories in distribution center is short, then it needs to search CCR(Capacity Constraint Resource) in supply chain and to control the speed of manufacturing and distribution according to the ability of CCR. This paper applies PT(Partial Transshipment) strategy for Delivery from distribution center to store or cyber consumer. the strategy this paper suggests chooses neighbour area from area which each distribution center takes charge, and then makes product ordered by cyber consumer which lives in the chosen area to be delivered according to inventory of distribution center.
4,000원
11.
2002.03
구독 인증기관 무료, 개인회원 유료
On a conceptual point of SCM, as a order of development, physical distribution, logistics management, basic supply chain management and advanced supply chain management etc. they are magnifying gradually, confusing with information and analysis techniques which seems possible. But on executing, it has a lot of problems because it is so complex and wide, so the enterprise which knows necessity of SCM, they don't have a total execution solution. On this paper, we will focus a proposal of alternatives with reasonableness of manufacturing and making a profit of sales department like most of enterprises to overcome carelessness and unready strategy of investment. And we will find a element through a analysis of cases, a statistical method of effective SCM, and actual survey to propose a alternative proposal. And, we will Prove the facts that it could be a guiding company which has a ability of cooperation with entities through the founding of supply chain, On the conclusion, we will show the variation which influences for capacity entities and alternative proposal to define a element which influence for a cause and effect basically.
4,800원
12.
2002.03
구독 인증기관 무료, 개인회원 유료
Since introducing the "Theory of Constraints" by Goldratt, its effect was verified by lots of scholars, men of enterprise. These days it is also introducing and studying in this country with good results. The objective of this study is to show how to determine the constraint resources on DBR scheduling. Actually, previous studies based on the line which just think a load/capacity rate on doing scheduling. This study will show a scheduling method which reflects multi-parameters. It could be a standard to reflect real manufacturing surroundings. On calculating a priority of each resources, we classified factors with subjective and objective factors. And we propose a decision model to incorporate values assigned by a group of experts on different factors to select a critical resource. On deploying this model, SN ratio of Taguchi method for each of subjective and objective factors will be used. And we propose a procedure which is organized with 7 steps. To understand the logic, a numerical manufacturing simulation will be presented. This method is a incorporating decision model on determining the constraint on multi parameters with experts.h experts.
4,000원
