간행물
대한안전경영과학회지 KCI 등재 Journal of Korea Safety Management & Science
- 발행기관 대한안전경영과학회
- 자료유형 학술지
- 간기 계간
- ISSN 1229-6783 (Print)2288-1484 (Online)
- 수록기간 1999 ~ 2024
- 주제분류 공학 > 안전공학 공학 분류의 다른 간행물
- 십진분류KDC 530DDC 620
권호리스트/논문검색
제13권 제2호 (2011년 6월) 31건
1.
2011.06
구독 인증기관 무료, 개인회원 유료
The Chicago Convention in 1944 made important contributions to aviation safety improvement, building an aviation safety monitoring system for its signatory countries. As ICAO is now on the verge of changing its supervision system from self-reporting to preventive Continuous Monitoring Approach(CMA) in 2013, we also expect our own safety system to make a progress accordingly. The government is pushing ahead with plans to build an integrated safety management system at government level that satisfies international standards and reflects domestic features. To this end, this report proposes the most effective system-building model, by analyzing the current status of the system that is in use and meets the requirements of international aviation agencies.
4,000원
2.
2011.06
구독 인증기관 무료, 개인회원 유료
Daily workers in construction sites rarely receive the benefit of systematic safety and health training as they are required to move from one construction site to another in response to the start, completion, and repetition of construction works. Also, small- to medium-sized construction sites often lack the capacity to train their workers. Therefore, as in the advanced countries, basic OSH training sheme for construction workers should be conducted in the industrial-level, rather than in individual workplace-level, to make the training more effective. By doing so, only workers with the basic safety training will be able to engage in construction works. Consequently, accidents in the construction industry will decrease, as workers themselves who are at the forefront of the construction worksites are empowered to play the central role in accident prevention activities.
4,000원
3.
2011.06
구독 인증기관 무료, 개인회원 유료
The introduction of the OHSMS(occupational health and safety management system) into the enterprise has been increased. But, to prevent accidents and take the value creation effectively, it is recommended that this system and the other management system based on business process should integrate. This paper deals with the present conditions and business values of OHSMS, KOSHA 2000, OHSAS 18001 and/or K-OHSMS 18001, which have introduced to Korea since 1997. By reviewing literature, we analyzed study trends in the development of quantitative and qualitative certification standards and the assessment methods of OHSMS. Also, we can summarize the field issues related to installment and operation of OHSMS : motivation, advantage, problems, obstacles, lessons, and revitalization. And then we can suggest issues of the integrated management system such as background, purpose, adoption view, and the integration types.
4,300원
4.
2011.06
구독 인증기관 무료, 개인회원 유료
Smart-Phones are utilized in disaster management field because it can deliver disaster information to large population simultaneously and quickly, and provide accurate information through situation-based service using the LBS(Location Based Service). To study on the utilization of smart phone for disaster information collection and dissemination method, this study suggest a framework which connects smart phone by loading application for reporting disaster. The disaster monitoring and situation dissemination system framework using smart phone is composed of 4 parts. First, smart phone application enters image, video, voice and text information and location of the disaster. Second, the disaster report reception and situation dissemination server receives the information, save in the DB, and send through smart phone SMS. Third, store into disaster information database. Fourth, display the disaster report and management information on 2D GIS, support the decision making process in deciding whether to manage as disaster, and disaster management web service which disseminates situation.
4,300원
5.
2011.06
구독 인증기관 무료, 개인회원 유료
New governance in the area of disaster management(New Governance) of the Safety Building in the form of public-private network as required in this era, SWOT can provide a strategic way to build public-private partnership recognized the necessity for a more efficient way. Between government agencies, private organizations and government and private organizations for the network between the systematic approach based on mutual trust, and participation by the activation of the meaning of seeing places studied. Partnership for Disaster Management as a result of the settlement than if the existing disaster management system for disaster response system more effective and efficient functioning in reducing human and material damage is expected to contribute are getting out.
4,000원
6.
2011.06
구독 인증기관 무료, 개인회원 유료
The objective of this study is to develop an evaluation model for the National highway risky areas. Thus, for the purposes of doing this, National highway risky area evaluated targeting to provide determination ranking and suggesting rival-superiority factors as well as under-inferiority factors in ten National highway risky areas. This study developed for modules of risky areas evaluation, using fuzzy set theory and analytic hierarchy process for evaluation model of National highway risky area in transport environment. The preceding studies assess risk analysis through analysis of causal relationships by National highway safety sector not only handles rating scale development suitable for assessment area by referring to accident frequency model but also geometric structures model. As result of this study, this model of Fuzzy Ahp Risk Analysis (FARA) apply for programmable design in real time processing through easily derive strategy for improvement activities to provide a decision-making effectively. Furthermore, this study contributes frame for improvements of National highway construction for renovation's priority strategy as well as future's policy schemes.
4,000원
7.
2011.06
구독 인증기관 무료, 개인회원 유료
Fire disasters have frequently happened in concrete structures, which resulted in severe structural damages and unsafety. In this case, the method which had evaluated the safety of damaged structures was often unaccepted from most of stakeholders and engineers. The objective of this study is to develope the procedure and method to be able to determine the safety. Numerical simulation was applied to produce the maximum temperature and temperature distribution. Nextly, temperature propagation analysis was performed to plot temperature gradients at each depth and location. The material strength curve versus temperature was applied to determine the safety of concrete structures damaged by fire. The maximum temperature should be calibrated considering real fire records ; magnitude, intensity, situation etc. The results shows that the selected procedure and method was applicable and practical.
4,000원
8.
2011.06
구독 인증기관 무료, 개인회원 유료
Contrast a general building high rise buildings itself has a kind of risk. In this study, the risk of a number of high rise buildings have fire fighting safety management of the particular risks associated with looking for ways to minimize focused. Issues include self fire protection. disaster management, building code and fire code of the mismatch, such as fire protection facilities aspects are explained in terms of three kinds, and for it to take steps in the direction suggested an alternative for high rise buildings. Although differences of opinion between departments will not be easy to fire fighting and building codes regarding conflicts of codes above all require immediate resolution, and high rise buildings to create a standard for effective risk management manual countermeasures will also be ensured.
4,000원
9.
2011.06
구독 인증기관 무료, 개인회원 유료
In the industrial site of 21st century, there are many and various powders of material, product and fuel of coal, chemical, detergent, paint, feed and more. Therefore, there always is a possible danger of dust explosion in each and every procedure and actually, there are increasing frequency of dust explosion as the use of dust and its amount increases in processes. Therefore, if we leave the current status like now, the unexpected massive dust explosion and its risk cannot be effectively prevented so there has to be effective application of understanding and development of explosion-prevention technology about dust explosion. Therefore, this research set the limit of research to systematically arrange the research results about dust explosion phenomenon and its prevention up to date and has its purpose to theoretically establish the prevention technology about dust explosion based on these theories.
4,000원
10.
2011.06
구독 인증기관 무료, 개인회원 유료
It has been very important to have an exact evaluation for risk factors in order to prevent WMSDs(Work-related Musculoskeletal Disorders). However, most WMSDs evaluation methods have always been some problems of possibilities associated with subjective evaluation. Therefore, this study tried to conduct a sort of usability analysis on three major evaluation methods(OWAS, RULA, REBA). Specifically, major subjects in the study consisted of three parts as follows; comparison of the results between experienced and inexperienced observers, analysis for the consistency of the results in terms of different evaluation times, and analysis for the consistency of the results in terms of different job characteristics(based on the part of the automobile). The results of the study were summarized as follows; 1) There was statistically significant difference of the results by RULA and by REBA between experienced and inexperienced observers. This might be due to the fact that experienced observers have had better ability to detect the important working posture during evaluation. However, the results by OWAS did not give any significantly different results between experienced and inexperienced observers, 2) All three checklists applied by experienced subjects did not show any single result significantly different in terms of different evaluation times. This might have to do with high intra-observer reliability from some of previous studies, 3) The five parts of an automobile were selected as five major jobs with different job characteristics in the automobile industry. Specifically, they were door part, front part(hood, etc.), inside part(dash board, seats, etc.), rear part(trunk etc.), and bottom part. All three methods did not show any significant differences for the results from each observers. Further study on this subject would eventually provide a sophisticated evaluating guidelines for WMSDs regarding determination of observer-specific evaluation, identification of repetitive number of evaluations for stable results for each checklist, determination of job-specific evaluation methods, and so on.
4,000원
11.
2011.06
구독 인증기관 무료, 개인회원 유료
The purpose of this study was to minimize of entrance surface dose (ESD) at the eye using high kVp technique in the computed radiography. We used REX-650R (Listem, Korea) general X-ray unit, and external detector with ESD dosimeter of Piranha 657 (RTI Electronics, Sweden). We used head of the whole body phantom. The total 64 images of X-ray anterior-posterior of skull were acquired using the film/screen (F/S) method and the digital of computed radiography method. The three radiology professor of more 10 years of clinical career evaluated a X-rays images in the same space by 5-point scale. The external detector was performed measurement of ESD of three times by same condition on the eye of the head phantom. The good image quality in the F/S method (90 kVp, 2.5 mAs) showed at the minimized ESD of 0.310 ± 0.001 mGy. the good image quality in the computed radiography method (90 kVp, 2.0 mAs) showed at the minimized ESD of 0.180 ± 0.002 mGy (P = 0.002). Finally the radiation dose could reduced about 50% in the computed radiography method more than the F/S method. In addition the eye entrance surface dose using high kVp technique with the computed radiography was reduced 92% more than conventional technique (F/S method).
4,000원
12.
2011.06
구독 인증기관 무료, 개인회원 유료
본 연구에서는 원형 박판 구조물의 안정성에 대하여 해석 하였다. 임계하중은 하중을 점차적으로 증가하여 구조물이 파괴가 발생하여 안정성을 상실 하는 상태에서 가장 작은 하중을 의미한다. 판구조의 안정성을 임계하중의 크기로 기초를 두고 해석 하였다. 원형 박판구조의 차분해석은 일반 판구조와 같으므로 최근에 많은 연구의 대상이 되어왔다. 차분법은 복잡한 구조물에서도 물론, 다양한 경계조건을 포함하는 문제에 이르기까지 효과적인 수치방법이다. 본 연구에서는 기본
4,000원
13.
2011.06
구독 인증기관 무료, 개인회원 유료
This research is to select a path planning algorithm to maximize survivability for Unmanned Aerial Vehicle(UAV). An UAV is a powered pilotless aircraft, which is controlled remotely or autonomously. UAVs are currently employed in many military missions(surveillance, reconnaissance, communication relay, targeting, strike etc.) and a number of civilian applications(communication service, broadcast service, traffic control support, monitoring, measurement etc.). In this research, a mathematical programming model is suggested by using MRPP(Most Reliable Path Problem) and verified by using ILOG CPLEX. A path planning algorithm for UAV is selected by comparing of SPP(Shortest Path Problem) algorithms which transfer MRPP into SPP.
4,200원
14.
2011.06
구독 인증기관 무료, 개인회원 유료
The aim of this study was to develop a standard to estimate safety factors of corrugated fiberboard containers used for agricultural products. This study is limited to fresh agricultural products packaged in the corrugated fiberboard containers and further work needs to be done, but we believe the data and results obtained by this research will greatly help to set proper package design for boxes. Especially, safety factor would be practically helpful for researchers for future study and packaging users to save packaging costs.
4,500원
15.
2011.06
구독 인증기관 무료, 개인회원 유료
Logistics parks make profits using the efficiency of time and space. Such logistics parks play an important role in a corporation creating operating profits as well as acting as a method of alternative investment for individuals. Logistics parks no longer simply store materials, but have become a place that plays an important role in various areas of corporate and individual activities, and thus the analysis of the selection of the location of logistics parks and the related characteristics is extremely important. The estimation model is established by the weights for industry derived from AHP(Analytic Hierarchy Process).
4,000원
16.
2011.06
구독 인증기관 무료, 개인회원 유료
The main objective of the present paper is to conduct a depth analysis of the structural relationship among cooperation of manufacturing corporations, their development of new products and performance in view of an empirical study. The findings of this study could be summed up as follows: First, from the analysis of relationship between cooperation of manufacturing corporations and development of new products, it was found out that there is a positive relationship among such factors of new product development as development process, organizational culture and substructure when cooperation among corporations becomes intensive. Second, the analysis of relationship between development of new products and financial outcomes showed that the factors of new product development like organizational culture and substructure do influence financial performance, while the development process don't. Third, in terms of relationship between factors of new product development and non-financial performance, it was analyzed that non-financial performance can be affected by such factors of new product development as development process, organizational culture and substructure.
4,000원
17.
2011.06
구독 인증기관 무료, 개인회원 유료
For an effective energy management in intelligent buildings it is necessary to gather information about position/absence of people and the level of population. In this paper the smart occupancy detection system based on the active RFID is developed to satisfy such a demand. The performance of the developed system is tested and verified through various experiments. Furthermore the feasibility test of the active RFID tag is performed to verify whether it can be used as a location-based occupancy sensor. The developed core technology can be also applied to other fields such as security, healthcare, smart home, etc.
4,000원
18.
2011.06
구독 인증기관 무료, 개인회원 유료
Currently, interest on physical distribution is increasing due to burden of oil cost increases as oil price rises day by day. As interest grows, there are number of studies have been conducting on saving the cost of distribution. On the other hand, number of study on service of distribution is insufficient. Actually, subject of service of physical distribution have been studied by number of survey organizations, research organizations and mass media. Although, configuration for each organization is different from each other and it is hard to measure objective satisfactory factor of customers. This means needs for constructing standardized measuring tool as well as research on measuring service quality of distribution is not active. Therefore, this research is to compare and analyze compatibility of service quality measuring using SERVQUAL and SERVPERF and trying to clarify differences affected by importance service quality by each level to actual service quality. Also, this research is to make basic and standardized measuring model to improve quality of physical distribution especially using analysis of service quality and customer satisfaction of pallet pool service which contributes rationalization of distribution and reduce the cost by standardizing specification and size of pallet, allowing sharing of pallet. To conduct this research, case study of a company A is used where it is in a pallet pool business. Using this example, the goal is to give help on pallet pool business a strategic exercise if the business by point out major factors that affect customer satisfaction by collecting customer assessment along with examination of SERVQUAL and SERVPERF in measuring service quality if pallet pool service.
4,200원
19.
2011.06
구독 인증기관 무료, 개인회원 유료
In this paper, the author devised new decision recommendation ordering method of items attributed by age to improve accuracy of recommender system. In conventional recommendation system, recommendation order is decided by high order of preference prediction. However, in this paper, recommendation accuracy is improved by decision recommendation order method that reflect age attribute of target customer and neighborhood in preference prediction. By applying decision recommendation order method to recommender system, recommendation accuracy is improved more than conventional ordering method of recommendation.
4,000원
20.
2011.06
구독 인증기관 무료, 개인회원 유료
This study contain below two contents. First, this study analyse an effect of consciousness of the quality cost for quality cost activity. Second, this study analyse an effect of quality cost activity for productivity improvement. The empirical result of this study is meaning that quality cost consciousness effects productivity improvement by quality cost activity. Therefore, this paper emphasize consciousness of quality cost for productivity improvement.
4,000원
1
2
