The purpose of this study was to determine the conditions necessary for the total eradication of mite pests in indoor environments. The study involved the construction of a sterilization experimental setup. For this setup, various sterilization techniques, such as UV-C, ozone, ultrasound, and heat were applied, based on previous research. The experimental procedure consisted of placing mite pests in a chamber and subjecting them to different sterilization techniques. Observations were conducted immediately after the experiment and repeated five days later to assess the extent of eradication. The results showed that UVC, ozone, and ultrasound methods were not successful in completely eradicating the mite pests. In contrast, heat sterilization demonstrated effectiveness depending on the specific temperature and exposure time. To achieve the eradication of mite pests in indoor environments, it is necessary to maintain conditions of short-term high-temperature sterilization above 65°C or sustain temperatures above 50°C for a minimum duration of 90 minutes.

1. 서 론
2. 연구 방법
    2.1 연구목적
    2.2 실험장치 및 실험절차
3. 연구 결과
    3.1 응애의 활동 특성 분석
    3.2 UV-C, 오존, 초음파 살비 실험결과
    3.3 고온 살비 실험결과
4. 고 찰
    4.1 실험결과의 해석
    4.2 실험 결과의 의의와 한계
5. 결 론

• 양수광(부산대학교 건축공학과) | Sukwang Yang (Department of Architectural Engineering, Pusan National University)
• 강율호(부산대학교 풍력발전미래기술연구센터) | Yulho Kang (Research Institute for Future Wind Energy Technology, Pusan National University)
• 양인규(LG전자 H&A R&D 센터) | Ingyu Yang (Home Appliance & Air Solution R&D Center, LG Electronics. Ltd)
• 신진혁(LG전자 H&A R&D 센터) | Jinhyouk Shin (Home Appliance & Air Solution R&D Center, LG Electronics. Ltd)
• 류정완(LG전자 H&A R&D 센터) | Jungwan Ryu (Home Appliance & Air Solution R&D Center, LG Electronics. Ltd)
• 안영철(부산대학교 건축공학과) | Youngchull Ahn (Department of Architectural Engineering, Pusan National University) Corresponding Author