논문 상세보기
Application of Thermodynamic Sorption Modelling: Separation and Characterization of Bentonil-WRK Montmorillonite
- 언어ENG
- URLhttps://db.koreascholar.com/Article/Detail/430421
p.131
A deep geological disposal system, which consists of the engineered and natural barrier components, is the most proven and widely adopted concept for a permanent disposal of the high level radioactive waste (HLW) thus far. The clay-based engineered barrier is designed to not only absorb mechanical stress caused by the geological activities, but also prevent inflow of groundwater to canister and outflow of radionuclides by providing abundant sorption sites. The principal mineralogical constituent of the clay material is montmorillonite, which is a 2:1 phyllosilicate having two tetrahedral sheets of SiO2 sandwiching an octahedral sheet of Al2O3. The stacking of SiO2 and Al2O3 sheets form the layered structures, and ion-exchange and water uptake reactions occur in the interlayer space. In order to reliably assess the radionuclide retention capacity of engineered barrier under wide geochemical conditions relevant to the geological disposal environments, sorption mechanisms between montmorillonite and radionuclides should be explicitly investigated in advance. Thus far, sorption behavior of mineral adsorbents with radionuclides has been quantified by the sorption-desorption distribution coefficient (Kd), which is simply defined as the ratio of radionuclide concentration in the solid phase to that in the equilibrium solution; the Kd value is conditional, and there have been scientific efforts to develop geochemically robust bases for parameterizing the sorption phenomena more reliably. In this framework, application of thermodynamic sorption model (TSM), which is theoretically based on the concept of widely accepted equilibrium models for aquatic chemistry, offers the potential to improve confidence in demonstration of radionuclide sorption reactions on the mineral adsorbents. Specifically, it is generally regarded in the TSM that coordination of radionuclides on montmorillonite takes place at the surficial aluminol and silanol groups while their ion-exchange reactions occur in the interlayer space also. The effects of electrical charge on the surface reactions are additionally corrected in accordance with the numerous theories of electrochemical interface. The present work provides an overview of the current status of application of TSM for quantifying sorption behaviors of radionuclides on montmorillonite and experimental results for physical separation and characterization of Ca-montmorillonite from the newly adopted reference bentonite (Bentonil- WRK) by means of XRD, BET, FTIR, CEC measurement, and acid-base titration. The determined mineralogical and chemical properties of the montmorillonite obtained will be used as input parameters for further sorption studies of radionuclides with the Bentonil-WRK montmorillonite.
