The research for the safe management of high-level waste in Korea has been conducted by the Korea Atomic Energy Research Institute since 1997, and the results have formed the basis of the national basic plan for the high-level waste management and the revised national basic plan. In the future, it is evolving and developing R&D focusing on securing technologies for demonstration of the disposal technologies and R&D to develop disposal concepts that increase safety and improve efficiency. Efficient management of heat generated from high-level radioactive waste, including spent nuclear fuel, is an important factor in establishing the disposal concepts because it must be in harmony with key factors such as repository layout, waste disposal container specifications, and design and operation for the barriers of the disposal system. For safe and complete isolation of highlevel radioactive waste in the deep geology, the disposal systems that meet the thermal requirements for the disposal system design have been developed by harmonizing the thermal characteristics of engineered and natural barriers in Korea. These disposal systems were based on low burn-up spent nuclear fuel characteristics generated in the early stages of nuclear power generation, and next, based on the high-level wastes from recycling process of the high burn-up spent nuclear fuels, and were the direct disposal systems for the high burn-up spent nuclear fuels. So, it is necessary to track and analyze the change process in the decay heat characteristics of the high-level waste to be disposed of in order to improve the disposal concept, which enhances the safety of disposal and the utilization of the national land. Therefore, in this paper, the process of change in decay heat of reference spent nuclear fuels for disposal applied to the disposal concepts from the initial stage of development of high-level waste disposal technology to the present in Korea is analyzed.