논문 상세보기
Development of a Treatment System for Decommissioning Radwaste
- 언어ENG
- URLhttps://db.koreascholar.com/Article/Detail/430490
p.206
During the operation or decommission of nuclear facilities, a large amount of dry active waste and cable waste with various shape and material is generated. Most of these wastes have almost no radioactive contamination and can be disposed of by incineration, landfill, recycling, etc. under clearance regulation. For clearance of radioactive waste, it is necessary to verify the characteristics of radiological contamination and prove that it meets the criteria for clearance regulation. According to the domestic clearance regulation, if it is difficult to measure radioactivity of wastes due to their surface condition using direct or indirect measurement methods, representative samples should be collected and analyzed for radioactivity. When sampling, it is desirable to collect samples of about 1 kg that can represent waste contamination per 200 kg or per 1 m2, and the homogeneity of the samples also should be demonstrated. However, in the case of dry active wastes, it is very difficult to prove the homogeneity of the samples because of surface shapes and conditions of the wastes. In particular, considering cable waste generated during the decommission, it is hardly capable to prove the representativeness of the sample, even though the inner shell of the covering material and the copper wire are almost uncontaminated. In this study, we show the development of a treatment system that makes it easy to prove the representativeness of samples when disposing of dry active waste or cable waste generated in nuclear facilities. The treatment device is designed in such a way that it has different storage unit and cutting unit suitable for the material characteristics of each waste type (soft, hard and cable), and therefore optimizes the efficiency of the shredding or cutting process. In addition, it is expected that the work efficiency in the radioactive treatment site with a narrow area can also be improved by providing a moving part on the device.
