The intermediate level spent resins waste generated from water purification for the the moderator and primary heat transport system during operaioin of heavy water reactor (HWR). Especially, moderator resins contain high level activity largely because of their C-14 content. So spent resins are considered as a problematirc solid waste and require special treatment to meet the waste acceptance criteria for a disposal site. Various methods have been studied for the treatment of spent resins which include thermal, destructive, and stripping methods. In the case of solidification methods, cement, bitument or organic polymers were suggested. In the 1990s, acid stripping using nitric acid and thermal treatment methods were actively investigated in Canada to remove C-14 nuclide from waste resin. In Japan, thermal distructive method was studied in the 1990s. Since 2005, KAERI developed acid stripping method using phosphate salt. However, acid stripping method are not suitable due to large amounts of 2nd waste containing acid solution with various nuclides. To solve this probelm, KAERI has been suggested the microwave treatment method for C-14 selective removal from waste resin in the 2010s. Pilot scale demonstration tests using radioactive waste resin generated from Wolsung unit 1 and unit 2 were successfully conducted and 95% of C-14 was selectively removed from the radioactive waste resin. In recent years, price of C-14 source is dramatically increased due to market growth of C-14 utilization and exclusive supply chain depending on China and Russia. High purity of C-14 were captured in HWR waste resin. Interest of C-14 recovery research from HWR waste resin is currently increased in Canada. In this study, microwave method is suggested to treat HWR waste resin with C-14 recovery process. Additionally, status of waste resin management and research trends of HWR waste resin treatment are introduced.