Effective containment and disposal of high-level radioactive waste is critical to ensure long-term environmental and human safety. Especially bentonite, which is widely used as a buffer material due to its favorable characteristics such as swelling ability and low permeability, plays an important role in preventing the migration of radioactive waste into the surrounding environment. However, the long-term performance of bentonite buffer remains an area of ongoing investigation, with particular attention focused on erosion mechanisms induced by swelling and groundwater flow. The erosion of the bentonite buffer can significantly impact the integrity of buffer and lead to the formation of colloids, which could potentially facilitate the transport of radionuclides through groundwater. Therefore, quantification of bentonite buffer erosion based on an understanding of the underlying mechanisms and factors that influence bentonite buffer erosion, is essential for the safety assessment of high-level radioactive waste repositories. In this study, we aimed to develop a bentonite buffer erosion model using the Adaptive Processbased total system performance assessment framework for a geological disposal system (APro) proposed by the Korea Atomic Energy Research Institute (KAERI). The impact of bentonite erosion on performance assessment can be broadly divided into bentonite property degradation by the penetration of the bentonite buffer into rock fractures and the formation of pseudocolloids. To simulate this phenomenon, Two-region model based on a dynamic bentonite diffusion model is adopted, which can quantify the extent of bentonite intrusion and loss by erosion. Using this Tworegion model, a numerical model was developed to simulate the degradation of bentonite properties based on the amount of bentonite intrusion, as well as to simulate the migration of pseudocolloids in the near-field by deriving the amount of pseudocolloid production based on the loss of bentonite and the sorption rate of radionuclides. To check the applicability of the developed numerical model, preliminary analysis was performed for the effect of bentonite erosion in terms of process-based performance assessment. It is anticipated that this comprehensive model developed in this study will contribute to the accurate and reliable assessment of the long-term performance and safety of high-level radioactive waste repositories.

• Jaewon Lee(Korea Atomic Energy Research Institute (KAERI)) Corresponding author
• Jung-Woo Kim(Korea Atomic Energy Research Institute (KAERI))