논문 상세보기
Calculation of Radioactive Sensitivity According to Irradiated Stainless Steel-304 Impurity Isotopes
- 언어ENG
- URLhttps://db.koreascholar.com/Article/Detail/431357
p.295
The decommissioning of nuclear power plants will generate a lot of low and intermediate-level radioactive waste (LILW), and preliminary radioactive evaluation for these wastes should be carried out before decommissioning work. Mainly, Concrete, Carbon Steel, Stainless Steel-304 (SS304) and Inconel are used in many parts of nuclear power plants and considered as main resource of nuclear wastes. Depending on the material location, the number of neutrons irradiated to material varies, which can range from self-disposal waste to LILW. In this paper, activation analysis was performed to compare the radiation dose according to the presence or absence of impurity elements present in SS304. For the calculation, SS304 composition and impurity elements were used as described in the report of NUREG-3474. This report lists 41 impurity elements for SS304 and other materials. Calculation code is used ORIGEN-S module in SCALE 6.1 code. Neutron flux is used as arbitrary value that around 1E+11 level and irradiation time is set as 30 year with 10-year cooling time. In the ORIGEN-S calculation, 1g of SS304 is used for easy calculation of specific activity. The ORIGEN-S calculation results are as follows. All impurity elements contained case calculated 9.32E+07 Bq activity. In the absence of all impurity elements case and most cases shows that total Becquerel value after 10-year cooling time around 9.11E+07 Bq, and Co impurity case had larger result. The calculation was performed again by increasing the amount of impurity substances by 100 times to perform the sensitivity evaluation more reliably. Representatively, Li, N, Co, and Ba impurity elements cases were calculated to have a particularly high Becquerel. Especially Co impurity element case, a total Becquerel of 3.03E+08 was calculated. Accordingly, evaluation of impurities mixed in SS304 must be considered, and in particular, the inclusion rate for Co must be considered.
