The rotary type dust remover is a device in which the rake assembly filters and processes clumps in the water while rotating and repeating movements along the track. It is installed in the pump suction part of the drainage pump station and the rainwater pump station to protect the pump to ensure smooth drainage. Since the rake assembly plays a key role in filtering out complications while passing through the water, stainless steel is applied to all components constituting it, and damage or failure due to deformation causes a crisis in case of heavy rain. This is because the existing rake assembly is excellent in rigidity, but all components are assembled by welding, which takes a lot of time for repair and replacement. In this study, shape design for rakes and assemblies of the rotary type dust remover, structural analysis to secure reliability, and demonstration tests were conducted through prototype production. Through this, it is intended to help prevent the stiffness of the joint of the rotary type dust remover from deteriorating, reduce time and cost, and efficient operation.

Abstract
1. 서 론
2. 레이크 형상 설계
3. 조립 부 형상 설계
    3.1 레이크 프레임과 브라켓 설계
    3.2 레이크 조립 부 설계
    3.3 레이크 조립 부 구조해석
    3.4 레이크 조립 부 제작
4. 결 론
References

• 채형구(Graduate school, Carbon Convergence Engineering, Jeonju University) | Hyeong-Gu Chae
• 강성수(Professor, Mechanical and Automotive Engineering, Jeonju University) | Sung-soo Kang Corresponding author