Background: Kinesiology taping (KT) is a method that helps immediately increase muscle activation, strength and joint stability by being attached to various skeletal muscles and structures of the body. Objectives: To investigate the effect of KT applied below the hyolaryngeal complex on the movement of the hyolaryngeal complex during swallowing in patients with dysphagia after stroke. Design: One-group, pre-post design. Methods: Twenty individuals with dysphagia after stroke participated in this study. KT was applied to the sternum and both clavicles from the hyolaryngeal complex. We analyzed the motion of the hyolaryngeal complex during swallowing with and placebo KT and KT using the Image-J software with videofluoroscopic swallowing study. In addition, a 0-to-10 numerical rating self-report scale was used to check the required effort and resistance felt during swallowing. Results: KT condition showed that the anterior and superior movement of the hyoid bone during swallowing was significantly lower than placebo KT (P<.05, all). Also, KT condition showed that the anterior and superior movement of the larynx during swallowing was significantly lower than placebo KT (P<.05, all). In result of statistical comparison between KT group and placebo KT group, the KT group showed significantly higher self-report scale score than the placebo KT group in terms of two category; the required effort and resistance felt (P<.05, all). Conclusion: This study demonstrated that KT applied below the hyolaryngeal complex inhibits the anterior and superior movement of hyoid bone and larynx during swallowing of patients with dysphagia after stroke.

With YouTube’s overwhelming share of the market, research on analyzing the types of content on YouTube is essential. An analysis of major global fashion YouTubers that the types of video content could be largely classified into three main categories: Fashion, beauty and daily life. The fashion category was subdivided into styling and fashion product review content type. The beauty category was subdivided into tutorials, beauty product reviews, and beauty tip content types. The daily life category was subdivided into daily sharing, consultation, and Q & A content types. Video content within fashion YouTuber channels is accompanied by expertise in fashion and beauty. At the same time, videos on daily life are uploaded, and through interactive communication with viewers, YouTubers form an intimate bond with subscribers. Content emphasizing entertainment, not just information delivery that introduces fashion products, is attracting growing interest among subscribers. This study analyzed the content of the increasingly popular fashion YouTuber channels and determined its important characteristics. The study makes a significant contribution to academic research by laying a foundation for future studies of YouTube content in the fashion field. Since differences in country of birth and race among YouTubers may influence content production, follow-up research will be conducted on the types and characteristics of domestic fashion YouTubers.

This study defines the concept of the fashion meme, which has recently emerged as a fashion trend, influential fashion keyword. After analyzing the concepts and characteristics of traditional memes from prior studies, examples of fashion memes were collected from online community and social network services, while a literature study and case study analysis were conducted in parallel drawing on related articles and journals. Modern fashion memes refer to fashion-related symbols and fashion images that are spread online by word-of-mouth, together with fashion styles and items that spread as a result of being worn. Fashion memes in cyberspace are mainly spread through social network or message services, and sometimes combine text, images, videos, hashtags, and emoticons. Fashion memes are a type of collective action of the people in response to social problems in the world, and often involve humorous antics, satire, shock, and eccentricity. Shared fashion memes reflect the expression of personality expression and fun, and at the same time are used as an expression of designer and brand creativity and are integral to marketing. Fashion memes are classified into four types, based on two central axes as follows: non-commercial/ commercial and anti-fashion/fashion-friendly. Unlike traditional memes, Internet-based fashion memes emphasize elements of transformation through creativity as well as imitation, which has become a persisting contemporary trend beyond temporary phenomena.

In this work, a carbon-doped carbon nitride photocatalyst is successfully synthesized through a simple centrifugal spinning method after heat treatment. The morphology and properties of the prepared photo catalyst are characterized by Xray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV–vis spectrophotometer (UV-vis), and specific surface area. The results show that the band gap of the prepared sample, g-CN-10 is 2.1 eV, is significantly lower than that of pure carbon nitride, 2.7 eV. As the amount of cotton candy increased, the absorption capacity of the prepared catalyst for visible light is significantly enhanced. In addition, the degradation efficiency of Rhodamine B (RhB) by sample g-CN-10 is 98.8 % over 2h, which is twice that value of pure carbon nitride. The enhancement of photocatalytic ability is attributed to the increase of specific surface area after the carbon doping modifies carbon nitride. A possible photocatalytic degradation mechanism of carbon-doped carbon nitride is also suggested.

본 연구는 EcoCal® (산화 칼슘) 및 GF Bactostop® (유 기산염 믹스)을 소시지에 사용하였을 때 항균 효과를 확인하였다. 소시지 제조 시, 대조군과 0.1% EcoCal® (0.1ECO), 0.1% EcoCal®+0.5% GF Bactostop® (0.1ECO + 0.5GF), 0.2% EcoCal® (0.2ECO) 및 0.2% EcoCal®+0.5% GF GF Bactostop® (0.2ECO+0.5GF) 등 총 5개 군을 첨가하여 소시지를 제조하였다. 제조가 완료된 소시지를 진공 포장하고 10주 동안 10oC에서 저장하며 7-10일 마다 시료를 균질화 하고 tryptic soy agar 및 Lactobacilli MRS agar 에 도포하여 호기성 일반세균 및 젖산균을 각각 확인하였다. 그 결과, 0.1ECO+0.5GF 첨가한 소시지가 가장 효과 적인 항균 효과를 나타냈으며, 0.1ECO 첨가 소시지가 두 번째로 효과적인 항균 효과를 나타냈다(P<0.05). 일반세균수는 대조군, 0.2ECO 및 0.2ECO+0.5GF 첨가 소시지에서는 저장 후 42일까지 점차 증가했지만(P<0.05), 0.1ECO 및 0.1ECO+0.5GF 첨가 소시지에서는 저장 후 49일까지 일반세균의 생장이 억제되었다(P<0.05). 젖산균 수는 대조군, 0.2ECO 및 0.2ECO+0.5GF 첨가 소시지에서 약 49일 까지 증가하였으나(P<0.05), 0.1ECO 및 0.1ECO+0.5GF 첨가 소시지에서 젖산균 생장이 억제되었다. 본 결과는 소시지 제형에 0.1% EcoCal®+0.5% GF Bactostop®을 첨가 하면 젖산균의 생장을 억제하여 소시지의 보존 기한을 연장시키는데 유용할 것으로 판단된다.

This research is conducted to analyze the compatibility of used monomers and produce the high functional hydrogel ophthalmic polymer containing silane and nanoparticles. VTMS (vinyltrimethoxysilane), TAVS [Triacetoxy(vinyl)silane] and cobalt oxide nanoparticles are used as additives for the basic combination of SilM (silicone monomer), MMA (methyl methacrylate) and MA (methyl acrylate). Also, the materials are copolymerized with EGDMA (ethylene glycol dimethacrylate) as cross-linking agent, AIBN (thermal polymerization initiator) as the initiator. It is judged that the lenses of all combinations are optically excellent and thus have good compatibility. Measurement of the optical and physical characteristics of the manufactured hydrophilic ophthalmic polymer are different in each case. Especially for TAVS, the addition of cobalt oxide nanoparticles increases the oxygen permeability. These materials are considered to create synergy, so they can be used in functional hydrogel ophthalmic lenses.

This paper aims to experimentally and numerically explore fracture mechanism characteristics of ultra-thin chopped carbon fiber tape-reinforced thermoplastics (UT-CTT) hat-shaped hollow beam under transverse static and impact loadings. Three distinct failure modes were observed in the impact bending tests, whereas only one similar progressive collapse mode was observed in the transverse bending tests. The numerical model was to incorporate some hypothetical inter-layers in UT-CTT and assign them with the failure model as cohesive zone model, which can perform non-linear characteristics with failure criterion for representing delamination failure. The dynamic material parameters for the impact model were theoretically predicted with consideration of strain-rate dependency. It shows that the proposed modeling approach for interacting damage modes can serve as a benchmark for modeling damage coupling in composite materials.

Metal additive manufacturing (AM) technologies are classified into two groups according to the consolidation mechanisms and densification degrees of the as-built parts. Densified parts are obtained via a single-step process such as powder bed fusion, directed energy deposition, and sheet lamination AM technologies. Conversely, green bodies are consolidated with the aid of binder phases in multi-step processes such as binder jetting and material extrusion AM. Green-body part shapes are sustained by binder phases, which are removed for the debinding process. Chemical and/or thermal debinding processes are usually devised to enhance debinding kinetics. The pathways to final densification of the green parts are sintering and/or molten metal infiltration. With respect to innovation types, the multistep metal AM process allows conventional powder metallurgy manufacturing to be innovated continuously. Eliminating cost/time-consuming molds, enlarged 3D design freedom, and wide material selectivity create opportunities for the industrial adoption of multi-step AM technologies. In addition, knowledge of powders and powder metallurgy fuel advances of multi-step AM technologies. In the present study, multi-step AM technologies are briefly introduced from the viewpoint of the entire manufacturing lifecycle.

The seasonal variation in the zooplankton community and hydrographic conditions were examined in three regions (inner, central, and outer regions) of Gamak Bay, Korea. Zooplankton samples were collected over a period of 12 months from January to December 2006. The hydrographical parameters of temperature, salinity, chlorophyll-a concentrations, dissolved oxygen, and chemical oxygen demand were measured. The total zooplankton density varied from 411 to 58,485 ind. m-3, with peaks in early summer. A total of 65 taxa accounted for approximately 86.9% of the annual mean zooplankton density: Noctiluca scintillans (30.9%) Paracalanus parvus s. l. (24.3%), Acartia omorii (11.9 %), Eurytemora pacifica (5.7%), cladocerans (4.1%), cirriped larvae (3.8%), Oithona similis (3.7%), and Pseudevedne tergestina (2.5%). Copepods dominated numerically throughout the year and comprised 54.3% of the total zooplankton. Most of the dominant copepods showed a well-defined seasonal pattern. The density and diversity of zooplankton in Gamak Bay were influenced by the hydrographic environment that was subject to significant spatial and temporal variations. Multivariate statistics showed that seasonal temperature was the most significant predictor of zooplankton taxa, density, and diversity, as well as the density of dominant taxa. Our results suggest that fluctuations in the zooplankton populations, particularly copepods, followed progressive increments in the temperature and COD concentrations.

국내 방사능재난대응체계는 일본 후쿠시마 원전 사고와 최근의 국내 대형 재난 교훈 등을 바탕으로 개선돼 오고 있지만, 아직 방사능재난 특성과 후쿠시마 원전 사고 교훈을 완전히 반영하고 있지 못하다. 하나의 방사능재난대응체계에 복수의 국내법이 적용되면서, 실제 상황 시, 대응체계의 실효성을 훼손할 가능성이 있는 법 조항 간 불일치 사항이 존재하기도 한다. 이에 본 논문에서는 방사능재난대응 속성을 분석하고, 방사능재난대응체계 적절성 측면에서「재난 및 안전관리 기본법」과 「원자력시설 등의 방호 및 방사능 방재 대책법」에서 규정한 방사능재난대응체계, 후쿠시마 원전 사고 시 일본측의 방사능 재난 대응 활동을 분석하고, 이 분석결과를 토대로, 대응체계와 조직 측면에서 국내 방사능재난대응체계 실효성을 제고하기 위해 필요한 개선사항을 도출하여 제시하였다.

The effects of the number of frozen-thawed ram sperm per single and double intra-cervical artificial insemination (AI) on fertility in ewes were studied. A total of 89 non-pregnant ewes were synchronized for oestrus with two doses of 100 μg PGF2α (Cloprostenol) 9 days apart. The ewes were randomly assigned to one of four groups; D200 (n = 23; double AI with 200 × 106 sperm), S200 (n = 24; single AI with 200 × 106 sperm), D100 (n = 24; double AI with 100 × 106 sperm) and S100 (n = 18; single AI with 100 × 106 sperm). Ewes were inseminated within 12 to 18 h for single AI and, within 10 to 12 h and 16 to 18 h for double AI after the onset of oestrus. The onset of oestrus ranged from 28 to 76 h (54.33 ± 1.28 h). The high percentage (29.2%) of ewes showed oestrus between 51 to 60 h. The non-return rates were highest in group D200 (56.5%) and differed significantly (p < 0.05) from group S100 (11.1%). No ewes were pregnant in group S100, and the pregnancy rates among the remaining groups did not differ. The mean gestation period was 152.8 ± 0.5 days and no difference was observed among the groups. The lambing and multiple birth rates were 100% in group D200. The single and twin lambing was highest in group D100 (33.3%) and group D200 (83.3%), respectively. Only one triplet lambing and the highest lambing size (2.2 ± 0.2) was recorded in group D200. In conclusion, double AI with 200 × 106 sperm showed comparatively most practical for achieving high pregnancy rates and lambing performances in Bangladeshi ewes under field conditions.

The pregnancy rate in indigenous ewes inseminated with frozen-thawed Suffolk semen following natural and synchronized estrus was determined. The serum Progesterone and Estrogen concentration and vaginal electrical resistance (VER) of ewes at the time of Artificial Insemination (AI) were observed as successful pregnancy determinants. 21 healthy ewes were selected for this experiment during January-April, 2017. 10 ewes were inseminated in natural estrus. Whereas, 11 ewes were inseminated after estrus synchronization using intravaginal sponges containing 60 mg medroxyprogesterone acetate. Trans-cervical Al (TCAI) was performed in all ewes within 12-16 hours of observed heat. Prostaglandin E1 analogue impregnated vaginal sponge was used for cervical relaxation 6-8 hours before insemination. Pregnancy was diagnosed through trans-abdominal ultrasonography after 40 days of AI. The pregnancy rate of ewes in synchronized estrus was higher (54.5%) than in natural estrus (30%). Higher serum Progesterone level (0.90 ± 0.02 ng/mL) and significantly (p < 0.001) lower VER (257.78 ± 10.11 ohm) were observed at the time of AI in ewes becoming pregnant. Results suggest that higher Progesterone concentration and lower VER could be considered as pregnancy indicators. Oestrous synchronization could be implemented to increase the pregnancy rate in ewes.