The emergence of green methods for the synthesis of graphene-based composites became the gateway for the solution of pollution and economic synthetic methods. Herein, we reported a single step in situ synthesis of reduced graphene oxide sheets decorated with silver nanoparticles (CRG–Ag nanocomposite) using custard apple leaf extract as an effective reducing and stabilizing agent. The ultraviolet–visible, Fourier transform infrared and Raman techniques revealed a primary confirmation about the formation of the said nanocomposite. The X-ray diffraction studies confirmed the face-centred cubic crystal structure of silver nanoparticles (Ag NPs) of 30 nm in size. The high-resolution scanning electron microscope spectra revealed the uniform distribution of Ag NPs on the graphene sheets. This simple, novel and rapid approach enabled a facile production of homogeneously deposited Ag NPs on graphene sheets. Thus synthesized CRG–Ag nanocomposite showed excellent photocatalytic efficiency of 96% in 2 h under sunlight using methylene blue as a model pollutant.

본 연구는 양액 내 존재하는 다량 영양소의 농도를 실시간으로 측정하기 위해 이온 선택 전극 (ISE) 으로 구성된 임베디드 시스템의 개발을 보여준다. NO3, K 및 Ca 이온을 감지하기위한 PVC ISE, H2PO4를 감지하기위한 코발트 전극, 기준 전극, 샘플 용액이 담기는 챔버, 펌프 및 밸브를 사용하여 측정하는 시스템으로 구성된다. 양액 샘플양 조절과 데이터 수집을 위해서 데이터 Due 보드가 사용되었고, 각각의 샘플 측정 전에, 측정 중 발생하는 드리프트를 최소화시키기 위해 2 점 정규화 방법을 사용하였다. PVC 멤브레인을 기반으로 한 NO3 및 K 전극의 농도 예측 성능은 표준 분석기의 결과와 근접한 일치 (R2 = 0.99) 나타내며 만족스러운 결과를 나타냈다. 하지만, Ca Ⅱ 이온 투과체 제조된 Ca 전극은 고농도 양액 농도에서 Ca 농도를 55 %로 낮게 측정하였다. 코발트 전극 기반 인산 측정은 반복측정 중에 발생한 코발트 전극의 불안정한 신호로 인해 표준 방법과 비교하여 45 ~ 155 mg / L의 인산 농도 범위에서 24.7 ± 9.26 %의 비교적 높은 오차를 나타냈다. 수경 P 감지의 예측 능력을 향상시키기 위해 코발트 전극의 신호 컨디셔닝에 대한 추가 연구가 필요함으로 판단된다.

Carbon materials with tailorable structures and superior properties have great potential applications in environmental protection, energy conversion, and catalysis. Plant biomass as abundant and green non-toxic raw materials has been considered as good precursors for synthesizing heteroatom-doped carbon materials. However, few studies have been reported on the different natures of carbon materials derived from different parts of the same plant biomass. In this study, we prepared carbon materials from the petioles and blades of apricot leaves by direct pyrolysis without additives. Detailed characterizations indicate that these two carbon materials are similar in element composition and graphitization degree, but differ greatly in surface area and pore volume. These differences can be attributed to the different contents of inorganic salts, vascular bundles, and proteins in petioles and blades. When used as catalysts for the oxidation of ethylbenzene, the petiole-derived carbon shows better catalytic performance than the blades derived carbon due to its high surface area, large average pore size, and doped nitrogen atoms. Furthermore, the carbon catalysts derived from the petioles and blades of poplar leaves and parasol tree leaves show the same difference in catalytic reaction, implying that the above-mentioned conclusion is rather universal, which can provide reference for the synthesis of carbon materials from leaves.

A highly functional, environmentally friendly carbonaceous adsorbent material using black liquor (a by-product from the pulp manufacturing) was produced and characterized. This study showed the effect of self-chemical activation driven by inherent alkali, originated from the unique composition of black liquor. A preparation of the micropore-dominant activated carbon was made in an easy and simple manner. The specific surface areas of samples were found to be 718–1591 m2/ g variated upon heat treatment conditions. The sample activated at 850 °C (50 min as retention time) showed the maximum specific surface area of 1591 m2/ g with 13.6% as a production yield. Considering the factors influencing pore structure of activated carbon materials in this study, it was confirmed that mesopore-related surface area increased gradually as the activation temperature and retention time increased. It is noteworthy to address that economically valuable micropore-dominant activated carbon can be produced by a simple heat treatment of the waste material, black liquor. The activated carbon sample derived from black liquor can be applied to various fields, such as environment and energy storage.

본 연구는 불법적으로 수산물에 사용될 수 있는 염료 18종에 대한 안전관리 강화를 위해 정량 및 정성 분석이 가능한 LC-MS/MS를 적용하여 검증하기 위해 수행되었다 . 확립된 시험법은 CODEX CAC/GL-71 가이드라인에 따라 직선성, 정밀성 , 정량한계 및 회수율 등을 통해 유효성을 확인하였다 . 대상시료에 1% 아세트산을 함유한 아세토니트릴로 추출 후 C18 과 PSA로 정제하였다 . 본 실험에서 정량한계는 0.002 mg/kg 수준으로 정량한계를 포함한 농도에 따라 검량선을 작성하였고 모두 0.98 이상의 직선성을 확인하였다 . 또한 정확성은 63%-112% 이고, 정밀도는 15% 이하로 재현성이 우수하였다 . 국내 유통 중인 수산물 124 건을 수거하여 개발된 분석법의 적용성 검증과 안전성을 확인하고자 잔류실태조사를 실시 하였고 그 결과 7건이 미량으로 검출 되었고 부적합은 없었다 . 확립된 시험법은 수산물 안전관리에 활용할 수 있을 것으로 사료되는 바이다 .

We report an analysis of two poorly studied eclipsing binary stars, GSC 04396-00605 and GSC 04395-00485 (recently named V455 Dra and V454 Dra, respectively). Photometric data of the two stars were obtained using the 1-m Korean telescope of the LOAO operated by KASI while monitoring the cataclysmic variable DO Dra in the frame of the Inter-Longitude Astronomy (ILA) project. We derived periods of 0.434914 and 0.376833 days as well as initial epochs JD 2456480.04281 and JD 2456479.0523, respectively, more accurate than previously published values by factors 9 and 6. The phenomenological characteristics of the mean light curves were determined using the New Algol Variable (NAV) algorithm. The individual times of maxima/minima (ToM) were determined using the newly developed software MAVKA, which outputs accurate parameters using "asymptotic parabola" approximations. The light curves were approximated using phenomenological and physical models. In the NAV algorithm, the phenomenological parameters are well determined. We derived physical parameters using the Wilson-Devinney model. In this model, the best-fit parameters are highly correlated, thus some of them were fixed to reasonable values. For both systems, we find evidence for the presence of a cool spot and estimate its parameters. Both systems can be classified as overcontact binaries of EW type.

PURPOSES : Asphalt pavements are damaged by various causes, such as cracks, potholes due to climate, and traffic environment. Asphalt aging has a significant effect on cracks, which may also form potholes. The purposes of this study are to estimate the change in asphalt binder and mixture performance and to correlate the physicochemical changes of the asphalt binder and mixture performance with aging. METHODS : The aging process of the asphalt was determined in the laboratory, based on the methods used in previous studies. In terms of consistency (stiffness), crack-resistance performance, moisture susceptibility, SK investigated the binder part, and Shoreki investigated the mixture part depending on the aging time. RESULTS : The consistency (stiffness) and brittleness of both the asphalt binder and mixture tended to increase with aging. In particular, the crack-resistance performance of the asphalt binder (G*sinδ, ductility, and ΔTc) and mixture (flexural fatigue test and Cantabro test) deteriorated because of asphalt aging. Furthermore, the aging mechanisms (oxidation and polymerization) were identified based on the chemical structure analysis. CONCLUSIONS : It is confirmed that the aging affected the chemical composition change and the physical properties of the asphalt. Asphalt pavements are significantly affected by the aging characteristics of the binder. It is concluded that the crack-resistance performance of the mixture decreases with aging due to these physical and chemical changes.

Background: The foot drop stimulator is designed to improve the walking ability of foot drop in patients after stroke, however, studies on clinical effects are still lacking. Objective: To investigate the effect of a foot drop stimulator on the walking and balancing abilities of foot drop patients after a stroke. Design: One-Group (Pretest-Posttest) Design. Methods: All subjects walked in all three conditions: foot drop stimulator (FDS) ankle foot orthosis (AFO) and barefoot. Primary outcome measures were assessed for walking and balance using a 10-m walking test (10MWT) and a timed up and go test (TUG). Secondary outcome measures consisted of a brief user interview, and the patients recorded the advantages and disadvantages of each condition. Results: FDS, AFO, and barefoot conditions showed a statistically significant difference in 10MWT and TUG (P<.001) as a result of comparing three conditions. FDS and AFO were significantly different from the barefoot condition as post-hoc results; however, there was no significant difference between the two conditions (P>.05). Conclusion: In this study, the foot drop stimulator contributed to improving the balance ability, and the walking ability was similar to the effect of the anklefoot orthosis.

Background: Ankle instability usually occurs after stroke, and contributes to unsafe walking and associated risk of falling in the affected patients. Objective: To investigate the effects of kinesiology taping (KT) on gait and balance ability (center of pressure, CoP) in patients with ankle instability after stroke. Design: One group, pre-post design. Methods: A total of 11 patients with ankle instability after stroke were enrolled. In all subjects, the gait and balance ability were assessed under 2 conditions: KT and barefoot. Gait and balance ability was assessed using GAITRite system and FDM-S platform. Results: Comparison between KT and barefoot condition, KT condition was significantly higher in velocity, cadence, step length, and stride length than barefoot condition (P<.05). KT condition was significantly lower in CoP path length and sway speed than barefoot condition (P<.05). Conclusion: KT indicated potential as a helpful method for walking and balancing ability in patients with ankle instability after stroke. Therefore, this study recommends KT as an option applicable to the stroke with ankle instability.

As the population of consumers of outdoor wear expands, there is increasing interest among consumers in trendy lifestyle outdoor. Accordingly, it is essential to develop designs that are drawn from outdoor wear. This can be limited to traditional mountaineering suits, and designs developed from men’s outdoor zip-up T-shirts, which are highly utilized in everyday life, are very important. This study developed the design of a summer zip-up T-shirt for men with both functional and aesthetic qualities. Visual images of foreign brands and domestic outdoor-focused T-shirts from the spring/summer seasons of 2013-2019 were collected to analyze the following modeling elements: silhouettes, details, colors, materials, and prints. In addition, the design concept was derived by analyzing presentations from the global outdoor trade Fairs (2013-2019). To develop a sustainable eco-friendly outdoor summer T-shirt for men, the concept was derived according to three categories: eco-friendly, sportismexpressed active elements of sports, and an outro-concept of urban town wear as an outdoor lifestyle. Thus, a total of 12 styles of design were developed. High utilization of the outdoor wear T-shirts (which are also popular as lifestyle wear), is an important aspect of building a segmented lineup of the slow-growing outdoor wear market and supports expansion of the scope of theoretical research on outdoor wear design.

Many companies make considerable efforts in implementing supply chain management systems to increase their competitiveness. In particular, there are significant investments in their ICT (Information and Communication Technology) and supply chain. However, considerable diversity exists in how well firms have been able to assimilate ICT and leverage the business value of it. In addition, studies on supply chains, particularly Real Time Enterprise (RTE) competence, which is cited for rapid information sharing and dynamic capabilities for each role in the supply chain, are insufficient. The purpose of this paper is to explore and evaluate effect of ICT utilization capabilities, including ‘ICT internal cooperative capabilities’ and ‘ICT operational flexibility capabilities’, on RTE capabilities (flexibility, visibility and prediction) and supply chain performance. To validate the research model proposed in the study, survey was conducted on companies using ICT along the supply chain of manufacturing industries. 216 data were used, SPSS and AMOS were used for the analysis methods. Study results showed that ICT internal collaboration capabilities affect agility, one of RTE capabilities, but not visibility and prediction, and ICT operational flexibility capabilities have affected all three RTE capacities. And, RTE capabilities had a huge impact on supply chain performance as expected. In this paper, it has been found that the ICT capabilities in manufacturing are an important factor in improving RTE capabilities that are important in the supply chain and improving the performance of the supply chain.

Nitric oxide (NO)-induced protein S-nitrosylation triggers mitochondrial dysfunction and was related to cell senescence. However, the exact mechanism of these damages is not clear. In the present study, to investigate the relationship between in vitro aging and NO-induced protein S-nitrosylation, oocytes were treated with sodium nitroprusside dihydrate (SNP), and the resultant S-nitrosylated proteins were detected through biotin-switch assay. The results showed that levels of protein S-nitroso thiols (SNO)s and expression of S-nitrosoglutathione reductase (GSNOR) increased, while activity and function of mitochondria were impaired during oocyte aging. Addition of SNP, a NO donor, to the oocyte culture led to accelerated oocyte aging, increased mitochondrial dysfunction and damage, apoptosis, ATP deficiency, and enhanced ROS production. These results suggested that the increased NO signal during oocyte aging in vitro, accelerated oocyte degradation due to increased protein S-nitrosylation, and ROS-related redox signaling.

The establishment of porcine embryonic stem cells (ESCs) from porcine somatic cell nuclear transfer (SCNT) blastocysts is influenced by in vitro culture day of porcine reconstructed embryo and feeder cell type. Therefore, the objective of the present study was to determine the optimal in vitro culture period for reconstructed porcine SCNT embryos and mouse embryonic fibroblast (MEF) feeder cell type for enhancing colony formation efficiency from the inner cell mass (ICM) of porcine SCNT blastocysts and their outgrowth. As the results, porcine SCNT blastocysts produced through in vitro culture of the reconstructed embryos for 8 days showed significantly increased efficiency in the formation of colonies, compared to those for 7 days. Moreover, MEF feeder cells derived from outbred ICR mice showed numerically the highest efficiency of colony formation in blastocysts produced through in vitro culture of porcine SCNT embryos for 8 days and porcine ESCs with typical ESC morphology were maintained more successfully over Passage 2 on outbred ICR mice-derived MEF feeder cells than on MEF feeder cells derived from inbred C57BL/6 and hybrid B6CBAF1 mice. Overall, the harmonization of porcine SCNT blastocysts produced through in vitro culture of the reconstructed embryos for 8 days and MEF feeder cells derived from outbred ICR mice will greatly contribute to the successful establishment of ESCs derived from porcine SCNT blastocysts.

한국산 개미과 비늘개미속의 2미기록종인 Strumigenys alecto과 Strumigenys solifontis가 분포함을 보고한다. 2 종의 일개미에 대한 형질과 사진을 제공한다.

The objective of this research work was to know ovarian dynamics and pregnancy rate of cyclic Murrah buffalo cows with induced estrus by administration of prostaglandin F2α (PGF2α) and timed artificial insemination (TAI) with frozen thawed semen. A total of 31 female buffaloes were selected for the study. The buffalos having matured CL observed by ultrasonography were given one intra muscular injection of cloprostenol 500 μg and TAI was performed using frozen thawed semen of Indian Murrah buffalo bull. Results showed that 90.32% (significantly, at p < 0.05) cows explore the sign of heat after injection of PG and 67.85% (significantly, at p < 0.05) cows were become pregnant out of 28 inseminated (TAI) cows. In the 28 inseminated (TAI) cows, average number of smaller and larger size of follicles were non-significantly (p > 0.05) higher at day 3 post PG injection, but the medium size of follicles was non-significantly (p > 0.05) higher at PG injection. At day 3 post PG injection the diameter of follicles was significantly (p < 0.05) higher, but the diameter of CL was significantly (p < 0.01) lower compared at PG injection. At PG injection the diameter of largest follicle was non-significantly differences (p > 0.05) in between pregnant and non-pregnant cows. But at day 3 post PG injection it was significantly (p < 0.01) higher in pregnant cows compared to non-pregnant cows. The number of small, medium, and large follicles at PG injection and at day 3 post PG injection were non-significantly (p > 0.05) difference in between pregnant and non-pregnant buffalo cows. Finally, it is concluded that the CL was effectively regresses and induced the sign of heat in buffalo cows and after AI the cows were become pregnant with significant rate. The study will help to the veterinarian and researcher to know the efficacy of PG injection and AI for reproductive efficiency in buffalo cows.

As a preclinical study, many researchers have been attempted to convert the porcine PSCs into several differentiated cells with transplantation of the differentiated cells into the pigs. Here, we attempted to derive neuronal progenitor cells from pig embryonic germ cells (EGCs). As a result, neuronal progenitor cells could be derived directly from pig embryonic germ cells through the serum-free floating culture of EB-like aggregates (SFEB) method. Treating retinoic acid was more efficient for inducing neuronal lineages from EGCs rather than inhibiting SMAD signaling. The differentiated cells expressed neuronal markers such as PAX6, NESTIN, and SOX1 as determined by qRT-PCR and immunostaining. These data indicated that pig EGCs could provide valid models for human therapy. Finally, it is suggested that developing transgenic pig for disease models as well as differentiation methods will provide basic preclinical data for human regenerative medicine and lead to the success of stem cell therapy.

In this study, we investigated whether infusion of colorectal cancer cell line and PMSG could increase endometrial cancer. As a result, our study confirmed that the injection of colorectal cancer can cause inflammation and cancer in the uterus and increase the VEGF gene in the uterus. The study also found that endometrial cancer was associated with PMSG.

본 연구에서는 우라늄 폐촉매 처리 공정에서 발생하는 우라늄 함유 폐기물 대상으로 유리-세라믹 매질 구조의 대형 디스크 소결체 형태로 제작 시, 최종 제작된 소결체의 비등방향 수축 특성 및 변형율 변화를 연구하였다. 본 연구에서는 최대 직경 40 cm를 갖는 다양한 크기 원형 디스크 형태와 원형 디스크의 1/4 크기의 부채꼴 형 소결체를 제작하여 이들의 비등방성 수축 특성을 평가하였다. 60 MPa 압력하에서 만들어지는 성형체는 소결 시 성형체의 크기 및 형태에 관계없이 높은 등방성 수축하였다. 제조된 전체 소결체에 대한 비등방성율은 평균 1.6%이었고 이때 평균 부피 감용율은 37.4% 이었다. 이러한 결과 로부터 국내에서 발생한 우라늄 폐촉매를 처리하기 위한 공정에서 발생하는 우라늄 함유 폐기물은 대형 디스크 형태의 유리-세라믹 매질 형태로 고형화함으로써 높은 안정성과 부피감용 효과를 가지며 200 L 드럼에 포장될 수 있음이 확인되었다.

Enamel knot (EK)—a signaling center—refers to a transient morphological structure comprising epithelial tissue. EK is believed to regulate tooth development in early organogenesis without its own cellular alterations, including proliferation and differentiation. EKs show a very simple but conserved structure and share functions with teeth of recently evolved vertebrates, suggesting conserved signaling in certain organs, such as functional teeth, through the course of evolution. In this study, we examined the expression patterns of key EK-specific genes including Dusp26 , Fat4, Meis2, Sln , and Zpld1 during mice embryogenesis. Expression patterns of these genes may reveal putative differentiation mechanisms underlying tooth morphogenesis.

Purpose of the study is to explore the effect of the types of mobile coupons(textvs. image-focused coupons; free-gift vs. discount coupons) on characteristic perception of mobile coupons, and the causal relationships among characteristic perception, attitude, and use intention of mobile coupons. A total of 140 university students participated in experiments with questionnaires including one of the four stimuli. Important findings are as follows. First, image-focused mobile coupons generated more enjoyment than did text-focused coupons. However, the text/image-focused coupons were not different in perception of informativeness and credibility of mobile coupons. Second, enjoyment perception was significantly increased when image-focused contents were combined with discount coupons whereas enjoyment perception was decreased when text-focused contents were combined with free-gift coupons. This interaction effect reflects that the level of enjoyment of consumers can be changed in terms of the combination of the value-provision types of coupons and the text-image focused contents. Third, it was found that consumer perception of coupon characteristics formed attitudes toward mobile coupons, and use intention of mobile coupons was determined by attitudes toward mobile coupons. Study findings may fill the void of research investigating the effect of text-image contents and the types of coupons on consumer reponses toward mobile coupons. Mobile coupons have limited quantity of information within a small size of mobile phone screen, therefore, the results were not consistent with prior research tested with mobile advertisements indicating the effect of text-image contents on perception of informativeness and credibility.