Prediction of compressive strength of concrete by Maturity Method is applied in construction site. However, due to the use of wired type high-priced equipment, economic efficiency and workability are falling. In this study, a newly developed concrete embedded wireless sensor is used to perform a mock-up test. Next, the concrete compressive strength of the Maturity Method is predicted using Saul and Plowman's function as measured temperature data. The predicted concrete strength at the beginning of the age was the actual strength and stiffness, but the error rate was less than 1% at 28th day.
The joints in this construction are formed through the bonding shear evaluation method during the placement of ultra-high-performance concrete (UHPC). The evaluation items include push-off tests for homogeneous UHPC + UHPC. The experimental samples comprised a monolithic placement as the baseline, two levels for the separated placement according to the compression strength of concrete, and five levels for the interface treatment. The bonding shear performance for the homogeneous UHPC + UHPC construction linearly increased with the width and depth of the grooves used for the interface treatment. The increase in the number of grooves and their cross-sectional areas only slightly influenced the bonding shear performance. The optimal interface treatment method for the homogeneous UHPC + UHPC construction grooves was at least 30 mm.
In this study, the expandable shale collected from the same area in Korea is fired to confirm the foamability. The firing uses an electric furnace capable of firing up to 1600 ℃. The shale was classified into three types according to its constituent and apparent characteristics, and each component was analyzed by XRD analysis method. The shale was fired considering the firing temperature and the residence time. As a result of firing, it was found that the firing temperature was different by more than 100 degrees and it was confirmed that the foaming property was increased with increasing temperature