In this paper, numerical simulations are performed for the drying process of potato chip in a microwave oven with multiple waveguides, with the purpose of enhancing the uniformity in temperature distribution. A simulation model is built and simulated using COMSOL Multiphysics software. The simulation model uses 5 different positions of waveguides to see whether it affects the heat distribution in the material. In order to know the final temperature result of the material after it comes out of the cavity on a moving conveyor belt, the average temperature values along the direction of the conveyor belt motion are calculated and plotted. From the results, the best waveguide position is determined to get the best temperature distribution in the potato chips.

The air blowers for fuel cell electric vehicle usually have big difference between inlet and outlet pressure. When the casing of the air blowers is designed, the stress analysis is required. (Approximately Inlet pressure is 0.5bar and outlet pressure is 2bar.) Gap distance between the casing and the impeller is 0.3mm. Therefore, if the amount of maximum deformation of casing is larger than 0.3mm, impeller crashed the casing. In order to avoid crashing, both the thickness and number of rims are changed and carried out simulations on each cases.

External gear pumps are the most widely employed source of power in hydraulic applications, allowing good performance and low manufacturing cost. Generally, pumps with involute external gears are most commonly used. The undesired large pressure overshoots or spikes could be excited by virtue of the sudden volumetric change of meshing pockets. In practice, the spikes cause the gear machines to be noisy, inefficient, and have fatigue problems. In order to improve above issues, relief grooves are adopted practically. In this paper, the meshing pressure and the effects of relief groove configurations are considered through CFD analysis.