In this study, the runoff characteristics of the non-rainfall period were examined using daily rainfall data from 1977 to 2017 and the data of runoff into the dam. Results showed that, the mean runoff decreases with longer non-rainfall periods in the Andong dam basin. The correlation coefficient between non-rainfall days and average runoff reaches 0.85. The results of the analysis of the runoff characteristics during the non-rainfall period, based on the preceding rainfall of Andong dam are as follows. The runoff characteristics of the entire non-rainfall period, shows that, for a rainfall of 1.0 mm or less, the runoff height was larger than the rainfall size and the base runoff larger. The correlation between the antecedent rainfall and runoff height was reached as high as 0.9864 in the 30 ~ 50 mm interval of the antecedent rainfall period, and this is the interval where the linearity of rainfall and runoff was at its maximum in the Andong dam basin. The correlation between the antecedent rainfall and the runoff height reached 0.92 for rainfalls of 100.0 mm. However, for rainfalls of 100.0 mm greater, the correlation between the antecedent rainfall and runoff height during the rainfall period was 0.64, which is relatively small. In this study, we investigated the runoff characteristics of the rainfall period in the Andong dam watershed. As a result, it was confirmed that the mean runoff decreased with rainfall duration. The linearity was found to be weak for rainfall events greater than 100.0 mm. The results of this study can be used as data for water balance analysis and for formulating a water supply plan to establish water resource management of Andong dam.

The relationship between debris flow and topographical factors is essential for the reliable estimation of soil loss. The objective of this paper is to estimate stability index and soil loss for assessing landsliding risk caused by debris flow. SIMAP and RUSLE are used to estimate stability index and soil loss, respectively. The landsliding risk area estimated by using SIMAP is found to be different from the large land area estimated by RUSLE. It is found that the spatial distribution of soil cover significantly influences landsliding risk area. Results also indicate that stability index and soil loss, estimated by soil cover factor, improve the assessment of landsliding risk.

Suspended wood waste was being inflow into the dam and the problem of waste disposal has been occurred. In this study, ethanol production using woody floater wastes was performed to estimate value in use for raw material of renewable energy. To achieve the goal, experiments of acid hydrolysis and ethanol fermentation using dam woody floater as raw materials for bioethanol was carried out. In the results of field survey in the chungju dam, kind of woody floater was mainly Japanese larch (Larix leptolepis) and hybrid poplar (Populus tomentiglandulosa). The results of sugar extraction showed that sugar content was higher in Larix leptolepis than Populus tomentiglandulosa. Extracted sugar from wood waste was effective consumed by yeast(P. Stipitis and S cerevisiae). In the experiment consumption of sugar including glucose, galactose and xylose, the consumption rate of S. cerevisiae is faster than that of P. stipitis. and efficiency for ethanol production is higer in S. cerevisiae than P. stipitis. Also it can be confirmed that resource as ethanol production using wood waste was available.

The water quality of reservoir can be controled by water quality prediction model because it can not only grasping the present water state but also predicting the water quality in future. In this study, WASP model is used to predict the water quality of Chungju reguration reservoir. This model has some special option which predicts the pollutant outflow phenomenon caused by the contamination sources. So this model is widely used because that can present the scientific basis in this field. This model can help the managers make the right choice of water quality policy. Environmental grade of Chungju reguration reservoir is in Ⅲ,Ⅳgrade which is in bad condition comparatively. The water contamination will be in poor as the year passes. When considering T-N, T-P which are the nutrient to control eutrophication, the concentrated administration about contamination sources is in urgent.

This study aims at the effective estimation of water supply capacity of small scale reservoir and the proposal of the data which is necessary to establish the water resources management plan of down stream area of the reservoir in the future by comparison and examination about reservoir operation technique for the security of agricultural water in small scale reservoir. The result of flow calculation by Tank model is used for the input data as the inflow data which is needed for the analysis of water supply capacity. Stochastic method, simulation method, and optimization method are used to examine the water supply capacity, and water security amount is compared with each method. From the analyses of water supply capacities by each method, slightly different results are shown in spite of the effort to compare them equally using input data such as inflow data under equal conditions, and the comparison of water supply capacities by each method are as follows; linear planning method, simulation method, and transition probability matrix method in the order of amount from the largest. It is thought that the simulation method in which comparatively reasonable application of the inflow data is possible and is simulated in successive time series dam operation of the three methods used in this study thus, simulation model is proper to estimate the water supply capacity of agricultural small scale reservoir. And it is judged that the heightening of efficiency of water resources utilization according to the development of downstream area of dam may be possible using the upward readjusted water supply amount of 55.18×106ton and 63.7×106ton at 95% and 90% supply reliability respectively which are above the planning water supply amount of 50.0×106ton when the simulation method is introduced as the standard.