The disposing method of the low-intermediate-level radioactive waste, near-surface disposal facilities are generally used. This disposal method refers to a method of constructing a concrete structure on the surface of the ground, putting radioactive waste in it, and covering it with an engineered barrier to isolate human life. Among these, engineered barriers mean covering multiple layers of heterogeneous materials such as sand, clay, and gravel. Engineering barriers have the purpose of delaying the release of radioactive materials into the natural environment as much as possible, and maintaining the isolation of radioactive waste and human life for as long as possible. In this study, the design and construction method of the facility to demonstrate the performance of the engineered barrier that isolates the surface disposal facility from nature was described. In addition, the design and construction method of monitoring technology that can monitor the safety of engineered barriers by measuring information such as moisture, temperature, and slope safety in real time was also explained.

Nanoporous non-woven carbon fibers for a gas sensor were prepared from a pitch/polyacrylonitrile (PAN) mixed solution through an electrospinning process and their gas-sensing properties were investigated. In order to create nanoscale pores, magnesium oxide (MgO) powders were added as a pore-forming agent during the mixing of these carbon precursors. The prepared nanoporous carbon fibers derived from the MgO pore-forming agent were characterized by scanning electron microscopy (SEM), N2-adsorption isotherms, and a gas-sensing analysis. The SEM images showed that the MgO powders affected the viscosity of the pitch/PAN solution, which led to the production of beaded fibers. The specific surface area of carbon fibers increased from 2.0 to 763.2m2/g when using this method. The template method therefore improved the porous structure, which allows for more efficient gas adsorption. The sensing ability and the response time for the NO gas adsorption were improved by the increased surface area and micropore fraction. In conclusion, the carbon fibers with high micropore fractions created through the use of MgO as a pore-forming agent exhibited improved NO gas sensitivity.