This study proposes the use of a cobalt-based Prussian blue analogue (Co-PBA; potassium cobalt hexacyanoferrate), as an adsorbent for the cost-effective recovery of aqueous ammonium ions. The characterization of Co-PBA involved various techniques, including Fourier-transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, nitrogen adsorption-desorption analysis, and zeta potential. The prepared Co-PBA reached an adsorption equilibrium for ammonium ions within approximately 480 min, which involved both surface adsorption and subsequent diffusion into the interior. The isotherm experiment revealed a maximum adsorption capacity of 37.29 mg/g, with the Langmuir model indicating a predominance of chemical monolayer adsorption. Furthermore, the material consistently demonstrated adsorption efficiency across a range of pH conditions. Notably, adsorption was observed even when competing cations were present. Co-PBA emerges as a readily synthesized adsorbent, underscoring its efficacy in ammonium removal and selectivity toward ammonium.

The objective of this study was to verify the effect of pig slurry application with acidification and biochar on feed value, nitrogen use efficiency (NUE) of maize forage, and ammonia (NH3) emission. The four treatments were applied: 1) non-pig slurry (only water as a control, C), 2) only pig slurry application (P), 3) acidified pig slurry application (AP), 4) acidified pig slurry application with biochar (APB). The pig slurry and biochar were applied at a rate of 150 kg N ha-1 and 300 kg ha-1, respectively. The AP and APB treatments enhanced all feed values compared to C and P treatments. The NUE for plant N was significantly increased 92.1% by AP and APB treatment, respectively, compared to the P treatment. On the other hand, feed values were not significantly different between AP and APB treatments. The acidification treatment with/without biochar significantly mitigated NH3 emission compared to the P treatment. The cumulative NH3 emission throughout the period of measurement decreased by 71.4% and 74.8% in the AP and APB treatments. Also, APB treatment reduced ammonia emission by 11.9% compared to AP treatment. The present study clearly showed that acidification and biochar can reduce ammonia emission from pig slurry application, and pig slurry application with acidification and biochar exhibited potential effects in feed value, NUE, and reducing N losses from pig slurry application through reduction of NH3 emission.

The objective of this study was to prove the effect of pig slurry application with charcoal on nitrogen use efficiency (NUE), feed value and ammonia (NH3) emission from maize forage. The four treatments were applied: 1) non-pig slurry (only water as a control), 2) only pig slurry application (PS), 3) pig slurry application with large particle charcoal (LC), 4) pig slurry application with small particle charcoal (SC). The pig slurry was applied at a rate of 150 kg N ha-1, and the charcoal was applied at a rate of 300 kg ha-1 regardless of the size. To determine the feed value of maize, crude protein, dry matter intake, digestible dry matter, total digestible nutrient, and relative feed value were investigated. All feed value was increased by charcoal treatment compared to water and PS treatment. Also, the NUE for plant N was significantly higher in charcoal treatments (LC and SC) compared to PS treatment. On the other hand, there is no significant difference for feed value and NUE between LC and SC. The NH3 emission was significantly reduced 15.2% and 27.9% by LC and SC, respectively, compared to PS. Especially, SC significantly decreased NH3 emission by 15% compared to LC. The present study clearly showed that charcoal application exhibited positive potential in nitrogen use efficiency, feed value and reducing N losses through NH3 emission.

This study was carried out to evaluate the forage yield and feed value of winter crops such as Italian ryegrass (IRG), oat, rye, barley, and hairy vetch. Forage crops were sown on 15 th October 2018 in a paddy field after harvesting rice and forage crops were harvested at two times of 25 th April 2019 and 18 th May 2 01 9. T he h ighest d ry m atter (DM) y ield w as h arvested f rom r ye among t he five species of forage crop on 18 th May. DM yield of all forages was increased 14.4% on 18 th May compared to 25 th April. The highest yield of crude protein (CP) was obtained from hairy vetch on 25 th April, whereas it was decreased (38.1%) on 18 th May. Moreover, the highest total digestible nutrient (TDN) yield and relative feed value (RFV) was harvested respectively from rye and hairy vetch on 25 th April. Delay of harvest time considerably increased DM yield but significantly decreased CP and RFV. In conclusion, rye was the best source of DM and TDN and hairy vetch was the high-quality feed. Rye harvested on 25 th April is the proper forage for resolving Korea’s problem of insufficient forage yield.

원자전달 라디칼 중합을 이용하여 poly(epichlorohydrine) (PECH)를 주사슬로 한 양친성 가지형 공중합체를 합성하였다. PECH로부터 poly(methyl methacrylate)(PMMA) 및 poly(butyl methacrylate)(PBMA)의 가지형 중합이 성공적임을 1H NMR과 FT-IR분석을 통해 확인하였다. 합성한 가지형 공중합체에 KI나 LiI 염을 도입하였을 때, ether 신축진동 피크가 낮은 wavenumber영역으로 이동하였으며, 이는 배위결합 상호작용 때문이다. PECH-g-PBMA 복합체의 이온 전도도는 PECH-g-PMMA 복합체에 비해 항상 높게 나타났는데, 이는 고무상인 PBMA 사슬의 높은 이동성으로부터 기인한 것으로 확인되었다. 최고 이온전도도 값은 질량비 10 wt%의 KI가 도입된 PECH-g-PBMA 전해질체에서 2.7 × 10 -5 S/cm로 나타났다.

본 연구는 사용 후 핵연료의 금속전환 공정에서 발생되는 폐용융염을 고형화하는 방법으로 실리카 함유 무기물을 이용하여 폐용융염을 열적, 수화학적 안정한 화합물로 전환하는 방법을 제안하였다. 실리카 함유 무기물(SAP)은 일반적인 sol-gel process로 합성되었으며, 및 로 구성된다. 제조된 SAP을 에서 폐용융염과 반응시켜 각 금속염화물에 대한 반응특성 및 열안정성을 조사하고, PCT 침출시험법을 이용하여 수화학적 안정성을 평가하였다. LiCl은 와 로, CsCl는 CS-aluminosilicate와 로, 는 로, 는 로 전환되었다. 9시간 동안 반응시킨 후, 금속염화물의 전환율은 였으며, 까지 열감량은 1wt%이하로 TGA(Thermo Gravimetric Analysis)로 확인하였다. Cs 및 Sr의 침출속도는 로 매우 높은 내침출특성을 나타내었다. 이상의 결과로부터, SAP으로 명명된 안정화제(stabilizer)는 금속염화물로 구성된 폐용융염에 대해 매우 효과적인 것으로 판단된다. SAP을 이용한 폐용융염의 고화처리방법은 후속적인 안정성의 검증과정을 통하여 폐용융염의 최종처분부피를 최소화할 수 있는 대안적인 고화방법으로 고려될 수 있을 것으로 기대 된다.

치과 콘빔 전산화단층 검사 시 갑상선 부위의 방사선 피폭선량을 최소화하기 위하여 보루스 (Bolus)를 이용한 차폐체를 제작하고, 방사선 차폐 효과와 영상의 적정성을 평가하였다. 치과용 콘빔 전산화단층검사 장비를 사용하여 치과방사선 두부 팬텀을 대상으로 갑상선의 좌, 우측 부위에 유리선량계를 부착시켜 방사선량을 측정하였다. 차폐체의 두께를 각각 10 mm, 20 mm, 30 mm로 다르게 하여 각 차폐체별로 흡수선량을 측정하여 차폐체를 사용하지 않았을 경우와 비교하였다. 8명의 평가자가 진료영상의 적정성을 여부를 평가하였다. 왼쪽 갑상선 부위에 30 mm Bolus 차폐체를 사용한 경우에는 결과값이 평균 342.67 μ㏉로 Bolu s 차폐체를 사용하지 않고 측정한 결과값의 평균 431.22 μ㏉보다 20.7% 감소하였고, 오른쪽 갑상선 부위에 30 mm Bolus 차폐체를 사용한 경우에는 평균 424.56 μ㏉로 21.9%의 선량감소효과를 보였다. 진료 영상의 적정성은 평가자 모두 사용 가능하다 판단하였다. 결론적으로, 치과 콘빔 전산화단층검사 시 갑상선 부위의 방사선 피폭선량을 최소화하기 위해 제작된 Bolus 차폐체는 장해음영 없이 적정한 진단 영상 처리가 가능하고, 방사선차폐 효과가 있어 유용한 차폐체로 적용 가능할 것으로 사료된다.

As an alternative to chemical fumigation using reagents such as methyl bromide, sweet persimmon was treated with γ-irradiation with the aim of extending the export of persimmon to countries with strict quarantine requirements. 1-Methylcyclopropene (1-MCP) was also employed to prevent the loss of persimmon quality, as treatment by γ-irradiation can cause changes in the firmness and color of the fruit, in addition to physiological injuries. The persimmon quality was assessed at 25℃ over a defined period of retail display following long term cold storage for 60 and 90 day. The persimmon firmness was significantly (p<0.05) decreased following γ-irradiation and display at 25℃ over 2 day, but was dramatically reduced after 3 day display and 60 day cold storage. Although irradiation increased the respiration rate of persimmon after long term storage, it was not significantly (p>0.05) altered at the doses employed herein. In contrast, 1-MCP treatment significantly (p<0.05) improved the persimmon firmness from 1.1 N to 6.0-20.6 N after γ-irradiation treatment and 3 day display and little change in the skin color was observed compared to the untreated samples. The rate of flesh softening was also significantly reduced following 1-MCP treatment.